求大神帮忙更改调试 - - Powered by Discuz!

标题: 求大神帮忙更改调试 [打印本页]

作者: 微妙的单身狗 时间: 2017-11-30 13:09
标题: 求大神帮忙更改调试
#include <reg52.h>
#include "12864.h"
#include "delay.h"
#define uc unsigned char
sbit led_DJ=P1^0;  //电机
sbit led_XY=P1^1;  //洗衣
sbit led_JS=P1^2;  //进水
sbit led_CS=P1^3;  //出水
sbit led_TS=P1^4;  //脱水
sbit key_JS=P1^5;  //进水按键
sbit key_CS=P1^6;  //出水按键
sbit moshi=P3^0; //更改模式光标
sbit queren=P3^1;  //确认运行
sbit xuanze=P3^2;  //选择不同模式
sbit qingrou=P3^3; //轻柔按键
sbit xidi=P3^4; //洗涤按键
sbit jiare=P3^5; //加热

void delay();    // 延时函数
void jinshui();    // 进水子程序
void chushui();    // 出水子程序
void start();    // 开始子程序
void over();    // 结束子程序
uc cycle=10,pwm=0;
uc xiyi=0,xiyit=20,ret=20,st=5;
uc n,j,second,minute;

//延时函数
/**********************************/
void delay(uc c)
{
uc a,b;
for(;c>0;c--)
  for(a=38;a>0;a--)
for(b=130;b>0;b--);
}
// 进水子程序
/**********************************/
void jinshui()
{
if(key_JS==0)
  led_JS=0;
  delay(2);
  while(key_JS==0)
  delay(2);
}
// 出水子程序
/**********************************/
void chushu()
{
  if(key_CS==0)
  led_CS=0;
  delay(2);
  while(key_CS==0)
  delay(2);
}
// 开始子程序
/***********************************/
void start()
{
  if(qingrou==0)
  led_DJ=0;
  delay(2);
  while(qingrou==0)
  delay(2);
}
void main()
{ unsigned char i,count=0;
TMOD=0X11;
TH0=15536/256;
TL0=15536%256;
TH1=64536/256;
TL1=64536%256;
ET0=1;
ET1=1;
EA=1;
Init_ST7920();
for(i=0;i<20;i++)
DelayMs(200);
ClrScreen();
LCD_PutString(0,1,"轻柔模式");
LCD_PutString(0,2,"洗涤模式");
LCD_PutString(0,3,"当前状态:");
while(1)
{
   while(1)
   {
   if(moshi==0)
   {
      delay(20);
count++;
if(count==5)
count=1;
while(moshi==0);
delay(20);
while(1)
{switch(count)
{case 1:Write_Cmd(0x80);Write_Data(' ');Write_Data(' ');break;
   case 2:Write_Cmd(0x82);Write_Data(' ');Write_Data(' ');break;
      case 3:Write_Cmd(0x86);Write_Data(' ');Write_Data(' ');break;
      case 4:Write_Cmd(0x92);Write_Data(' ');Write_Data(' ');break;
      }
      delay(100);
switch(count)
{case 1:if(xiyi==0) LCD_PutString(0,1,"轻柔");else LCD_PutString(0,1,"洗涤");break;
   case 2:Write_Cmd(0x82);Write_Data(xiyit/10+'0');Write_Data(xiyit%10+'0');break;
      case 3:Write_Cmd(0x86);Write_Data(st/10+'0');Write_Data(st%10+'0');break;
      case 4:Write_Cmd(0x92);Write_Data(ret/10+'0');Write_Data(ret%10+'0');break;
      }
   if(moshi==0||queren==0||xuanze==0)  break;
      }
      }
   }
   }
if(xuanze==0)
{delay(20);
   switch(count)
{case 1:xiyi=!xiyi;break;
   case 2:xiyit-=5;if(xiyit==0) xiyit=20;break;
   case 3:st--;if(st==0) st=5;break;
   case 4:ret-=5;if(ret==0) ret=20;break;
}
switch(count)
{ case 1:if(xiyi==0) LCD_PutString(0,1,"轻柔");else LCD_PutString(0,1,"洗涤");break;
   case 2:Write_Cmd(0x82);Write_Data(xiyit/10+'0');Write_Data(xiyit%10+'0');break;
   case 3:Write_Cmd(0x86);Write_Data(st/10+'0');Write_Data(st%10+'0');break;
   case 4:Write_Cmd(0x92);Write_Data(ret/10+'0');Write_Data(ret%10+'0');break;
}
while(xuanze==0);
DelayMs(20);
}
{DelayMs(20);
switch(count)
{
case 1:xiyi=!xiyi;break;
   case 2:xiyit-=5;if(xiyit==0) xiyit=20;break;
   case 3:st--;if(st==0) st=5;break;
   case 4:ret-=5;if(ret==0) ret=20;break;
}
switch(count)
{
case 1:if(xiyi==0) LCD_PutString(0,1,"轻柔");else LCD_PutString(0,1,"洗涤");break;
   case 2:Write_Cmd(0x82);Write_Data(xiyit/10+'0');Write_Data(xiyit%10+'0');break;
   case 3:Write_Cmd(0x86);Write_Data(st/10+'0');Write_Data(st%10+'0');break;
   case 4:Write_Cmd(0x92);Write_Data(ret/10+'0');Write_Data(ret%10+'0');break;
}
   while(xuanze==0);
   DelayMs(20);
}
if(queren==0)
   count=0;
   DelayMs(20);
   while(queren==0);
   DelayMs(20);
           led_JS=0;
LCD_PutString(0,4,"洗涤进水             ");
while(key_JS==0);
led_JS=1;
LCD_PutString(0,4,"洗涤中                   ");
if(xiyi==0)
pwm=5;
else
pwm=7;
TR0=1;
TR1=1;
while(minute!=xiyit);
TR0=0;
TR1=0;
TH0=15536/256;
         TL0=15536%256;
         TH1=64536/256;
         TL1=64536%256;
led_DJ=1;
n=j=second=minute=0;
LCD_PutString(0,4,"洗涤排水             ");
led_CS=0;
while(key_CS==0);
LCD_PutString(0,4,"第一次甩干             ");
pwm=10;
      TR0=1;
TR1=1;
while(minute!=st);
TR0=0;
TR1=0;
TH0=15536/256;
         TL0=15536%256;
         TH1=64536/256;
         TL1=64536%256;
led_DJ=1;
n=j=second=minute=0;
led_JS=0;
LCD_PutString(0,4,"涮洗进水             ");
while(key_JS==0);
led_JS=1;
if(xiyi==0)
      pwm=5;
else
         pwm=7;
TR0=1;
TR1=1;
LCD_PutString(0,4,"涮洗                   ");
while(minute!=xiyit);
TR0=0;
TR1=0;
TH0=15536/256;
         TL0=15536%256;
         TH1=64536/256;
         TL1=64536%256;
led_DJ=1;
n=j=second=minute=0;
led_CS=0;
LCD_PutString(0,4,"涮洗排水                   ");
while(led_JS=0);
led_CS=1;
jiare=0;
LCD_PutString(0,4,"加热烘干                   ");
TR0=1;
while(minute!=ret);
         TR0=0;
TR1=0;
TH0=15536/256;
         TL0=15536%256;
         TH1=64536/256;
         TL1=64536%256;
jiare=1;
n=j=second=minute=0;
LCD_PutString(0,4,"洗涤结束                   ");
}
void dd() interrupt 3
{
    TH1=64536/256;
TL1=64536%256;
n++;
if(n==cycle)
n=0;
if(n<pwm)
led_DJ=0;
else
led_DJ=1;
}
void ss() interrupt 1
{ TH0=15536/256;
TL0=15536%256;
j++;
if(j==20)
{second++;
   j=0;
}
if(second==60)
{minute++;
   second=0;
   Write_Cmd(0x9E);
   Write_Data(minute/10+'0');
   Write_Data(minute%10+'0');
   LCD_PutString(7,4,"分             ");
}
}

作者: cjjcjj1 时间: 2017-11-30 13:57
提示: 作者被禁止或删除内容自动屏蔽

作者: 微妙的单身狗 时间: 2017-11-30 14:11
12864.h和delay.h在上面定义的有现在是无法选择工作模式。。我用的开发板调试的

作者: david888 时间: 2017-11-30 14:12
是编译不过吗，还是那里出问题了，看不完整

作者: 微妙的单身狗 时间: 2017-11-30 16:55

david888 发表于 2017-11-30 14:12
是编译不过吗，还是那里出问题了，看不完整

编译没有问题在开发板上进行模拟不行。。。按键无法控制程序运行

作者: 微妙的单身狗 时间: 2017-11-30 16:56

david888 发表于 2017-11-30 14:12
是编译不过吗，还是那里出问题了，看不完整

方便加下QQ吗我的是958218792

作者: wc86110 时间: 2017-11-30 18:48
在开发板上搞就更需要注意了，没有完整资料这更改调试咋进行

作者: 微妙的单身狗 时间: 2017-12-1 17:30

wc86110 发表于 2017-11-30 18:48
在开发板上搞就更需要注意了，没有完整资料这更改调试咋进行

12864.H和delay.h 没有任何问题我在别的程序试过了您方便加下我QQ吗。。。958218792

欢迎光临 (http://www.51hei.com/bbs/)