STM32+esp8266三种模式测试配套软件和源码下载 -

#include "sys.h"
#include "delay.h"
#include "usart.h"
#include "led.h"
#include "lcd.h"
#include "key.h"
#include "usmart.h"
#include "malloc.h"
#include "mmc_sd.h"
#include "flash.h"
#include "ff.h"
#include "exfuns.h"
#include "text.h"
#include "usart2.h"
#include "touch.h"
#include "common.h"
//ATK-ESP8266 WIFI模块测试实验
int main(void)
{
u8 key,fontok=0;
Stm32_Clock_Init(9); //系统时钟设置
delay_init(72); //延时初始化
uart_init(72,115200); //串口1初始化
USART2_Init(36,115200); //串口3初始化
LCD_Init(); //初始化液晶
LED_Init(); //LED初始化
KEY_Init(); //按键初始化
usmart_dev.init(72); //usmart初始化
TP_Init(); //初始化触摸屏
mem_init(); //初始化内存管理
exfuns_init(); //为fatfs相关变量申请内存
f_mount(fs[0],"0:",1); //挂载SD卡
f_mount(fs[1],"1:",1); //挂载FLASH.
key=KEY_Scan(0);
if(key==KEY0_PRES) //强制校准
{
LCD_Clear(WHITE); //清屏
TP_Adjust(); //屏幕校准
TP_Save_Adjdata();
LCD_Clear(WHITE); //清屏
}
fontok=font_init(); //检查字库是否OK
if(fontok||key==KEY1_PRES)//需要更新字库
{
LCD_Clear(WHITE); //清屏
POINT_COLOR=RED; //设置字体为红色
LCD_ShowString(60,50,200,16,16,"ALIENTEK STM32");
while(SD_Initialize()) //检测SD卡
{
LCD_ShowString(60,70,200,16,16,"SD Card Failed!");
delay_ms(200);
LCD_Fill(60,70,200+60,70+16,WHITE);
delay_ms(200);
}
LCD_ShowString(60,70,200,16,16,"SD Card OK");
LCD_ShowString(60,90,200,16,16,"Font Updating...");
key=update_font(20,110,16);//更新字库
while(key)//更新失败
{
LCD_ShowString(60,110,200,16,16,"Font Update Failed!");
delay_ms(200);
LCD_Fill(20,110,200+20,110+16,WHITE);
delay_ms(200);
}
LCD_ShowString(60,110,200,16,16,"Font Update Success!");
delay_ms(1500);
LCD_Clear(WHITE); //清屏
}
atk_8266_test(); //进入ATK_ESP8266测试
}

复制代码