1.8寸液晶小彩屏资料大全（内含51单片机及stm32例程） -

#include "led.h"
#include "delay.h"
#include "key.h"
#include "sys.h"
#include "lcd.h"
#include "usart.h"
#include "24cxx.h"
#include "flash.h"
#include "flash.h"
#include "spi.h"
u8 state=0;
void beepms(u16 va);
void xianshi(void);//显示信息
void refshow(void);//刷新显示
void Load_Drow_Dialog(void)
{
LCD_Clear(WHITE);//清屏
POINT_COLOR=BLUE;//设置字体为蓝色
LCD_ShowString(lcddev.width-24,0,200,16,16,"RST");//显示清屏区域
POINT_COLOR=RED;//设置画笔蓝色
}
void xianshi()//显示信息
{
BACK_COLOR=WHITE;
POINT_COLOR=RED;
//显示32*32汉字
showhanzi32(0,0,0); //淘
showhanzi32(40,0,1); //晶
showhanzi32(80,0,2); //驰
//显示16*16汉字
showhanzi16(0,35,0); //专
showhanzi16(20,35,1); //注
showhanzi16(40,35,2); //显
showhanzi16(60,35,3); //示
showhanzi16(80,35,4); //方
showhanzi16(100,35,5); //案
LCD_ShowString(0,55,200,16,16,"1.8 TFT SPI");
}
void showqq()
{
u16 x,y;
x=0;
y=75;
while(y<lcddev.height-39)
{
x=0;
while(x<lcddev.width-39)
{
showimage(x,y);
x+=40;
}
y+=40;
}
}
void refshow(void) //刷新显示
{
switch(state)
{
case 0:
LCD_Clear(WHITE);
xianshi();
showqq();
break;
case 1:
LCD_Clear(BLACK);
break;
case 2:
LCD_Clear(RED);
break;
case 3:
LCD_Clear(GREEN);
break;
case 4:
LCD_Clear(BLUE);
break;
}
}
void jiance(u8 key) //检测按键
{
if(key==2)
{
state++;
LCD_Init();
if(state==5)
{
state=0;
}
refshow();//刷新显示
}
}
void beepms(u16 va)
{
beep=1;
delay_ms(va);
beep=0;
}
int main(void)
{
u16 i=0;
u8 key=0;
delay_init(); //延时函数初始化
NVIC_Configuration(); //设置NVIC中断分组2:2位抢占优先级，2位响应优先级
uart_init(9600); //串口初始化为9600
LED_Init(); //LED端口初始化
SPI_Flash_Init();//初始化Flash;
KEY_Init(); //按键初始化
SPI1_Init(); //SPI1初始化
LCD_Init();
POINT_COLOR=RED;//设置字体为红色
xianshi(); //显示信息
showqq(); //显示QQ
while(1)
{
key=KEY_Scan(0);//扫描按键
jiance(key);//检测按键
i++;
if(i==65000)
{
i=0;
LED0=!LED0;
……………………
…………限于本文篇幅余下代码请从51黑下载附件…………

复制代码