标题: 控制57步进电机旋转 [打印本页]

---

作者: aing123    时间: 2018-4-23 14:16
标题: 控制57步进电机旋转
代码:

int PUL=7; //define Pulse pin
int DIR=6; //define Direction pin
int ENA=5; //define Enable Pin
void setup() {
pinMode (PUL, OUTPUT);
pinMode (DIR, OUTPUT);
pinMode (ENA, OUTPUT);

}

void loop() {
for (int i=0; i<6400; i++) //Forward 6400 steps
{
digitalWrite(DIR,LOW);
digitalWrite(ENA,HIGH);
digitalWrite(PUL,HIGH);
delayMicroseconds(100);
digitalWrite(PUL,LOW);
delayMicroseconds(100);
}
delay(1000);

for (int i=0; i<6400; i++) //Backward 6400 steps
{
digitalWrite(DIR,HIGH);
digitalWrite(ENA,HIGH);
digitalWrite(PUL,HIGH);
delayMicroseconds(50);
digitalWrite(PUL,LOW);
delayMicroseconds(50);
}
delay(1000);
}

---

欢迎光临 (http://www.51hei.com/bbs/)

Powered by Discuz! X3.1