标题: 51单片机自动控制系统12864液晶显示(源程序+仿真电路) [打印本页]

---

作者: younglove    时间: 2018-4-30 19:40
标题: 51单片机自动控制系统12864液晶显示(源程序+仿真电路)
仅供参考
单片机自动控制系统仿真原理图如下（proteus仿真工程文件可到本帖附件中下载）



单片机源程序如下:

1. /*
   
2.    
   
3. */
   
4. //*P1.0                     Y0: 正转
   
5. //*P1.1                 Y1: 反转
   
6. //*P1.2                 Y2: 运行
   
7. //*P1.3                 E:          *P3.7
   
8. //*P1.4                 RW:         *P3.6
   
9. //*P1.5                 DI:         *P3.5
   
10. //*P1.6                 CS1:        *P3.3
    
11. //*P1.7                 CS2:        *P3.4
    
12. //P2:                液晶数据线
    
13. #include <AT89X52.H>
    
14. #include <1210.H>                            //控制板输入输出定义
    
15. #define TIMER0_COUNT 0xDC11      
    
16. static unsigned timer0_tick;
    
17. unsigned int                demp;                //定时时间
    
18. unsigned int                  deda1;
    
19. /*绘图型 LCD 指令 */
    
20. #define  GLCD_OFF                     62         //显示器关闭
    
21. #define  GLCD_ON                      63         //显示器打开
    
22. #define  GLCD_START_LINE_0            192         //设开始坐标
    
23. #define  SET_PAGE                    184         //设页数(X坐标)
    
24. #define  SET_Y_ADDRESS_0             64         //设X坐标
    
25. #define  CLEAR                       0    //设页数(X坐标)
    
26. /*绘图型 LCD 控制线 */
    
27. #define  ENABLE                          1
    
28. #define  DISABLE                0
    
29. #define  READ                            1
    
30. #define  WRITE                               0
    
31. #define  COMMAND                          0
    
32. #define  DATA                        1
    
33. #define  GLCD_CS2                   P3_3
    
34. #define  GLCD_CS1                   P3_4
    
35. #define  GLCD_D_I                   P3_5
    
36. #define  GLCD_R_W                         P3_6
    
37. #define  GLCD_ENABLE                      P3_7
    
38. /*********************************************************************/
    
39. /********************字库***********************************************/
    
40. /*********************************************************************/
    
41. unsigned char code digit[10][2][16]=
    
42. {{{0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x00},
    
43. {0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,0x00,0x00,0x00}},/*"0",9*/
    
44. {{0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
    
45. {0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,0x00,0x00,0x00}},/*"1",0*/
    
46. {{0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x00,0x00},
    
47. {0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,0x00,0x00,0x00}},/*"2",1*/
    
48. {{0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x00,0x00},
    
49. {0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,0x00,0x00,0x00}},/*"3",2*/
    
50. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x00,0x00},
    
51. {0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,0x00,0x00,0x00}},/*"4",3*/
    
52. {{0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x00,0x00},
    
53. {0x00,0x00,0x00,0x00,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,0x00,0x00,0x00}},/*"5",4*/
    
54. {{0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x00,0x00},
    
55. {0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,0x00,0x00,0x00}},/*"6",5*/
    
56. {{0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00},
    
57. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*"7",6*/
    
58. {{0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x00,0x00},
    
59. {0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,0x00,0x00,0x00}},/*"8",7*/
    
60. {{0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x00},
    
61. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,0x00,0x00,0x00}}};/*"9",8*/
    
62. //(:)
    
63. unsigned char code comma[2][16]=
    
64. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
    
65. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00}};/*":",0*/
    
66. unsigned char code space[2][16]=
    
67. {{0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00},
    
68. {0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00}};        
    
69. unsigned char code GUOLI[8][2][16]=
    
70. {{{0x80,0x81,0x8E,0x04,0x00,0x10,0x50,0x90,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x00},
    
71. {0x40,0x20,0x1F,0x20,0x20,0x40,0x40,0x43,0x41,0x48,0x50,0x4F,0x40,0x40,0x40,0x00}},/*"过",0*/
    
72. {{0x10,0x20,0x81,0x66,0x00,0xF8,0x48,0x48,0xFF,0x2A,0x2A,0x2A,0xAA,0x18,0x08,0x00},
    
73. {0x04,0x7C,0x43,0x20,0x18,0x37,0x00,0x38,0x41,0x45,0x49,0x41,0x71,0x08,0x30,0x00}},/*"滤",1*/
    
74. {{0x00,0xFC,0x44,0x44,0x44,0xFC,0x10,0x90,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x00},
    
75. {0x00,0x07,0x04,0x04,0x04,0x07,0x00,0x00,0x03,0x40,0x80,0x7F,0x00,0x00,0x00,0x00}},/*"时",2*/
    
76. {{0x00,0xF8,0x01,0x06,0x00,0xF0,0x92,0x92,0x92,0x92,0xF2,0x02,0x02,0xFE,0x00,0x00},
    
77. {0x00,0xFF,0x00,0x00,0x00,0x07,0x04,0x04,0x04,0x04,0x07,0x40,0x80,0x7F,0x00,0x00}}};/*"间",3*/
    
78. unsigned char code XIAOSHI[8][2][16]=
    
79. {
    
80. {{0x00,0x00,0x00,0xC0,0x70,0x20,0x00,0xFF,0x00,0x10,0x20,0xC0,0x80,0x00,0x00,0x00},
    
81. {0x04,0x02,0x01,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x01,0x07,0x02,0x00}},/*"小",8*/
    
82. {{0x00,0xFC,0x44,0x44,0x44,0xFC,0x10,0x90,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x00},
    
83. {0x00,0x07,0x04,0x04,0x04,0x07,0x00,0x00,0x03,0x40,0x80,0x7F,0x00,0x00,0x00,0x00}}};/*"时",9*/
    
84. unsigned char code QINGXIE[8][2][16]=
    
85. /*****************************************************************/
    
86. {{{0x10,0x61,0x06,0xE0,0x18,0x20,0xAA,0xAA,0xAA,0xBF,0xAA,0xAA,0xAA,0x2A,0x00,0x00},
    
87. {0x04,0x04,0xFF,0x00,0x00,0x00,0xFF,0x0A,0x0A,0x0A,0x4A,0x8A,0x7F,0x00,0x00,0x00}},/*"清",0*/
    
88. {{0x10,0x61,0x06,0xF0,0xA0,0x98,0x8E,0x88,0x88,0xFF,0x88,0x88,0x88,0x80,0x80,0x00},
    
89. {0x04,0x04,0xFF,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x3F,0x40,0x40,0x40,0x70,0x00}}};/*"洗",1*/
    
90. 
    
91. unsigned char code MIAO[2][16]=
    
92. {{0x12,0x12,0xD2,0xFE,0x91,0x11,0xC0,0x38,0x10,0x00,0xFF,0x00,0x08,0x10,0x60,0x00},
    
93. {0x04,0x03,0x00,0xFF,0x00,0x83,0x80,0x40,0x40,0x20,0x23,0x10,0x08,0x04,0x03,0x00}};/*"秒",0*/
    
94. unsigned char code ZHIDONG[8][2][16]=                                                                                                   
    
95. /*****************************************************************/
    
96. {{{0x00,0x00,0x00,0xF8,0x48,0x48,0x4C,0x4B,0x4A,0x48,0x48,0x48,0xF8,0x00,0x00,0x00},
    
97. {0x00,0x00,0x00,0xFF,0x44,0x44,0x44,0x44,0x44,0x44,0x44,0x44,0xFF,0x00,0x00,0x00}},/*"自",0*/
    
98. {{0x20,0x24,0x24,0xE4,0x24,0x24,0x24,0x20,0x10,0x10,0xFF,0x10,0x10,0xF0,0x00,0x00},
    
99. {0x08,0x1C,0x0B,0x08,0x0C,0x05,0x4E,0x24,0x10,0x0C,0x03,0x20,0x40,0x3F,0x00,0x00}},/*"动",1*/
    
100. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
101. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*":",0*/
     
102. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",4*/
     
103. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*" ",5*/
     
104. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",6*/
     
105. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*" ",7*/
     
106. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",8*/
     
107. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*" ",9*/
     
108. {{0x10,0x61,0x06,0xE0,0x18,0x20,0xAA,0xAA,0xAA,0xBF,0xAA,0xAA,0xAA,0x2A,0x00,0x00},
     
109. {0x04,0x04,0xFF,0x00,0x00,0x00,0xFF,0x0A,0x0A,0x0A,0x4A,0x8A,0x7F,0x00,0x00,0x00}},/*"清",10*/
     
110. {{0x10,0x61,0x06,0xF0,0xA0,0x98,0x8E,0x88,0x88,0xFF,0x88,0x88,0x88,0x80,0x80,0x00},
     
111. {0x04,0x04,0xFF,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x3F,0x40,0x40,0x40,0x70,0x00}}};/*"洗",11*/
     
112. unsigned char code DANCHENG[2][2][16]=
     
113. /*****************************************************************/
     
114. {{{0x00,0x00,0xF8,0x28,0x29,0x2E,0x2A,0xF8,0x28,0x2C,0x2B,0x2A,0xF8,0x00,0x00,0x00},
     
115. {0x08,0x08,0x0B,0x09,0x09,0x09,0x09,0xFF,0x09,0x09,0x09,0x09,0x0B,0x08,0x08,0x00}},/*"单",0*/
     
116. {{0x10,0x12,0xD2,0xFE,0x91,0x11,0x80,0xBF,0xA1,0xA1,0xA1,0xA1,0xBF,0x80,0x00,0x00},
     
117. {0x04,0x03,0x00,0xFF,0x00,0x41,0x44,0x44,0x44,0x7F,0x44,0x44,0x44,0x44,0x40,0x00}}};/*"程",1*/
     
118. unsigned char code SHUANGCHENG[2][2][16]=
     
119. /*****************************************************************/
     
120. {{{0x00,0x12,0x22,0x42,0x82,0x62,0x1E,0x00,0x1E,0xE2,0x02,0x02,0xE2,0x1E,0x00,0x00},
     
121. {0x20,0x10,0x08,0x06,0x01,0x03,0x4E,0x24,0x10,0x09,0x06,0x09,0x10,0x60,0x20,0x00}},/*"双",0*/
     
122. {{0x10,0x12,0xD2,0xFE,0x91,0x11,0x80,0xBF,0xA1,0xA1,0xA1,0xA1,0xBF,0x80,0x00,0x00},
     
123. {0x04,0x03,0x00,0xFF,0x00,0x41,0x44,0x44,0x44,0x7F,0x44,0x44,0x44,0x44,0x40,0x00}}};/*"程",1*/
     
124. unsigned char code LIANXI[2][2][16]=
     
125. /*****************************************************************/
     
126. {{{0x40,0x41,0x4E,0xC4,0x00,0x44,0xE4,0x5C,0x47,0xF4,0x44,0x44,0x44,0x04,0x00,0x00},
     
127. {0x00,0x40,0x20,0x1F,0x22,0x42,0x42,0x42,0x42,0x5F,0x42,0x42,0x42,0x42,0x42,0x00}},/*"连",0*/
     
128. {{0x20,0x30,0xA8,0x67,0x12,0x00,0x90,0x34,0xD4,0x1F,0xF4,0x14,0x54,0x34,0x10,0x00},
     
129. {0x22,0x23,0x22,0x12,0x10,0x02,0x02,0x43,0x22,0x1A,0x07,0x0A,0x12,0x62,0x02,0x00}}};/*"续",1*/
     
130. /******************************************************************/
     
131. char code SHOUDONGHZ[4][2][16]=
     
132. {{{0x00,0x24,0x24,0x24,0x24,0x24,0x24,0xFE,0xFE,0x22,0x22,0x22,0x22,0x22,0x20,0x00},
     
133. {0x02,0x02,0x02,0x02,0x02,0x42,0xC2,0xFF,0x7F,0x02,0x02,0x02,0x02,0x02,0x02,0x02}},/*"手",0*/
     
134. {{0x20,0x24,0x24,0xE4,0xE4,0x24,0x24,0x24,0x30,0x10,0xFF,0xFF,0x10,0xF0,0xF0,0x00},
     
135. {0x08,0x1C,0x1F,0x0B,0x0C,0x0D,0x4F,0x6E,0x34,0x1C,0x0F,0x23,0x60,0x7F,0x3F,0x00}},/*"动",1*/
     
136. {{0x08,0x38,0x30,0xFF,0xFF,0x20,0x20,0x20,0xFF,0xFF,0xE1,0xE7,0x2E,0x2C,0x20,0x20},
     
137. {0x04,0x06,0x03,0xFF,0xFF,0x60,0x38,0x1F,0x07,0x00,0x03,0x0F,0x3C,0x70,0x60,0x20}},/*"状",0*/
     
138. {{0x00,0x04,0x04,0x04,0x84,0xC4,0x74,0x7F,0xDF,0xB4,0x64,0xC4,0x84,0x84,0x04,0x00},
     
139. {0x00,0x60,0x79,0x39,0x01,0x3C,0x7C,0x42,0x4E,0x4C,0x40,0x70,0x74,0x0D,0x39,0x31}}};/*"态",1*/
     
140. char code SHANG[4][2][16]=
     
141. {{{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
142. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*" ",3*/
     
143. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x40,0x40,0x40,0x40,0x40,0x00,0x00,0x00},
     
144. {0x00,0x40,0x40,0x40,0x40,0x40,0x40,0x7F,0x40,0x40,0x40,0x40,0x40,0x60,0x40,0x00}},/*"上",0*/
     
145. {{0x00,0x40,0x44,0x44,0x44,0xFE,0x42,0x42,0x40,0x40,0xFE,0x40,0x40,0x60,0x40,0x00},
     
146. {0x00,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00}},/*"升",0*/
     
147. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
148. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};/*" ",3*/
     
149. char code XIA[4][2][16]=
     
150. {{{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
151. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*" ",3*/
     
152. {{0x00,0x02,0x02,0x02,0x02,0x02,0x02,0xFE,0x22,0x62,0xC2,0x82,0x02,0x03,0x02,0x00},
     
153. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00}},/*"下",1*/
     
154. {{0x00,0xFE,0x22,0x5A,0x86,0x00,0x48,0x44,0x2B,0xD2,0x2A,0x26,0x42,0x40,0x40,0x00},
     
155. {0x00,0xFF,0x02,0x04,0x03,0x00,0x0D,0x09,0x09,0xFF,0x09,0x09,0x09,0x08,0x00,0x00}},/*"降",0*/
     
156. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
157. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};/*" ",3*/
     
158. char code WU[2][16]=
     
159. {{0x00,0x40,0x42,0x42,0x42,0x42,0x42,0xFE,0xC2,0x42,0x42,0x42,0x42,0x42,0x40,0x00},
     
160. {0x40,0x40,0x20,0x10,0x08,0x04,0x03,0x00,0x3F,0x40,0x40,0x40,0x40,0x40,0x70,0x00}};/*"无",0*/
     
161. unsigned char code QINGPIN[8][2][16]=
     
162. /*****************************************************************/
     
163. {{{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
164. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*1*/
     
165. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
166. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*2*/
     
167. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
168. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*3*/
     
169. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
170. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*4*/
     
171. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
172. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*5*/
     
173. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
174. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*6*/
     
175. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
176. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*7*/
     
177. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
178. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};/*8*/
     
179. /**************************************************************************************/
     
180. unsigned char code KAIGUAN[6][2][16]=
     
181. {{
     
182. {0x08,0x88,0x68,0xFF,0x28,0x48,0x10,0x48,0x44,0x43,0x44,0x48,0x50,0x10,0x10,0x00},
     
183. {0x02,0x01,0x00,0x7F,0x00,0x20,0x22,0x2C,0x21,0x2E,0x30,0x28,0x27,0x22,0x20,0x00}},/*"检",2*/
     
184. {{0x08,0x31,0x86,0x60,0x00,0xFE,0x02,0xF2,0x02,0xFE,0x00,0xF8,0x00,0x00,0xFF,0x00},
     
185. {0x04,0xFC,0x03,0x00,0x80,0x47,0x30,0x0F,0x10,0x67,0x00,0x07,0x40,0x80,0x7F,0x00}},/*"测",3*/
     
186. {{0xFE,0x02,0x32,0x4E,0x82,0x00,0xFE,0x4A,0xCA,0x4A,0x4A,0x4A,0x7E,0x00,0x00,0x00},
     
187. {0xFF,0x00,0x02,0x04,0x03,0x00,0xFF,0x40,0x20,0x03,0x0C,0x12,0x21,0x60,0x20,0x00}},/*"限",4*/
     
188. {{0x00,0xC0,0x30,0xEC,0x03,0x2A,0xC8,0x09,0x0A,0x0E,0x08,0xE8,0x48,0x08,0x00,0x00},
     
189. {0x01,0x00,0x00,0x7F,0x20,0x20,0x20,0x27,0x20,0x30,0x2E,0x21,0x20,0x20,0x20,0x00}},/*"位",5*/
     
190. {{0x00,0x40,0x20,0x18,0x16,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x00},
     
191. {0x00,0x01,0x81,0x41,0x21,0x11,0x0D,0x03,0x05,0x09,0x31,0x61,0xC1,0x41,0x01,0x00}},/*"失",6*/
     
192. {{0x00,0x00,0xFE,0x02,0xF2,0x02,0xFE,0x20,0xF8,0x17,0x12,0x10,0xF0,0x10,0x10,0x00},
     
193. {0x00,0x40,0x31,0x0C,0x03,0x04,0xB9,0x50,0x20,0x13,0x0C,0x13,0x60,0xC0,0x40,0x00}}};/*"败",7*/
     
194. unsigned char code QIANXUAN[4][2][16]=
     
195. {{
     
196. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x40,0x40,0x40,0x40,0x40,0x00,0x00,0x00},
     
197. {0x00,0x40,0x40,0x40,0x40,0x40,0x40,0x7F,0x40,0x40,0x40,0x40,0x40,0x60,0x40,0x00}},/*"上",0*/
     
198. {{0x00,0x40,0x44,0x44,0x44,0xFE,0x42,0x42,0x40,0x40,0xFE,0x40,0x40,0x60,0x40,0x00},
     
199. {0x00,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00}},/*"升",1*/
     
200. {{0xFE,0x02,0x32,0x4E,0x82,0x00,0xFE,0x4A,0xCA,0x4A,0x4A,0x4A,0x7E,0x00,0x00,0x00},
     
201. {0xFF,0x00,0x02,0x04,0x03,0x00,0xFF,0x40,0x20,0x03,0x0C,0x12,0x21,0x60,0x20,0x00}},/*"限",0*/
     
202. {{0x00,0xC0,0x30,0xEC,0x03,0x2A,0xC8,0x09,0x0A,0x0E,0x08,0xE8,0x48,0x08,0x00,0x00},
     
203. {0x01,0x00,0x00,0x7F,0x20,0x20,0x20,0x27,0x20,0x30,0x2E,0x21,0x20,0x20,0x20,0x00}}};/*"位",1*/
     
204. unsigned char code HOUXUAN[4][2][16]=
     
205. {{
     
206. {0x00,0x02,0x02,0x02,0x02,0x02,0x02,0xFE,0x22,0x62,0xC2,0x82,0x02,0x03,0x02,0x00},
     
207. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00}},/*"下",0*/
     
208. {{0x00,0xFE,0x22,0x5A,0x86,0x00,0x48,0x44,0x2B,0xD2,0x2A,0x26,0x42,0x40,0x40,0x00},
     
209. {0x00,0xFF,0x02,0x04,0x03,0x00,0x0D,0x09,0x09,0xFF,0x09,0x09,0x09,0x08,0x00,0x00}},/*"降",1*/
     
210. {{0xFE,0x02,0x32,0x4E,0x82,0x00,0xFE,0x4A,0xCA,0x4A,0x4A,0x4A,0x7E,0x00,0x00,0x00},
     
211. {0xFF,0x00,0x02,0x04,0x03,0x00,0xFF,0x40,0x20,0x03,0x0C,0x12,0x21,0x60,0x20,0x00}},/*"限",0*/
     
212. {{0x00,0xC0,0x30,0xEC,0x03,0x2A,0xC8,0x09,0x0A,0x0E,0x08,0xE8,0x48,0x08,0x00,0x00},
     
213. {0x01,0x00,0x00,0x7F,0x20,0x20,0x20,0x27,0x20,0x30,0x2E,0x21,0x20,0x20,0x20,0x00}}};/*"位",1*/
     
214. unsigned char code CHUWU[4][2][16]=        
     
215. {{
     
216. {0x00,0x02,0xE6,0x2A,0x32,0x22,0x3E,0x22,0x22,0x3E,0x22,0x32,0x2E,0x23,0x22,0x00},
     
217. {0x40,0x30,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*"严",0*/
     
218. {{0x08,0x08,0x0A,0xEA,0xAA,0xAA,0xAA,0xFF,0xA9,0xA9,0xA9,0xE9,0x08,0x08,0x08,0x00},
     
219. {0x40,0x40,0x48,0x4B,0x4A,0x4A,0x4A,0x7F,0x4A,0x4A,0x4A,0x4B,0x48,0x40,0x40,0x00}},/*"重",1*/
     
220. {{0x40,0x30,0x2C,0xE7,0x24,0x24,0x40,0x48,0x7F,0x48,0x48,0x7F,0x48,0x48,0x40,0x00},
     
221. {0x01,0x01,0x01,0xFF,0x41,0x21,0x00,0xFF,0x49,0x49,0x49,0x49,0x49,0xFF,0x00,0x00}},/*"错",2*/
     
222. {{0x40,0x41,0xCE,0x04,0x00,0x40,0x5F,0x51,0x51,0xD1,0x51,0x51,0x5F,0x40,0x00,0x00},
     
223. {0x00,0x00,0x3F,0x10,0x88,0x42,0x22,0x12,0x0A,0x07,0x0A,0x12,0x22,0xE2,0x42,0x00}}};/*"误",3*/
     
224. unsigned char code LIANLU[6][2][16]=
     
225. {{
     
226. {0x40,0x42,0x4C,0xC4,0x00,0x22,0xAA,0xAA,0xAA,0xBF,0xAA,0xAA,0xAA,0x22,0x20,0x00},
     
227. {0x00,0x00,0x00,0x7F,0x20,0x10,0xFF,0x0A,0x0A,0x0A,0x4A,0x8A,0x7F,0x00,0x00,0x00}},/*"请",0*/
     
228. {{0x02,0xFE,0x92,0x92,0x92,0xFE,0x12,0x11,0x12,0x1C,0xF0,0x18,0x17,0x12,0x10,0x00},
     
229. {0x08,0x1F,0x08,0x08,0x04,0xFF,0x05,0x81,0x41,0x31,0x0F,0x11,0x21,0xC1,0x41,0x00}},/*"联",1*/
     
230. {{0x20,0x38,0xA7,0x62,0x30,0x00,0x10,0x08,0x9F,0x64,0x64,0x94,0x0C,0x00,0x00,0x00},
     
231. {0x22,0x23,0x12,0x12,0x12,0x04,0x02,0x7F,0x22,0x22,0x22,0x22,0x7F,0x03,0x02,0x00}},/*"络",2*/
     
232. {{0x40,0x20,0xF8,0x17,0x02,0x10,0x10,0xFE,0x10,0x10,0x10,0xFE,0x10,0x10,0x00,0x00},
     
233. {0x00,0x00,0xFF,0x00,0x42,0x22,0x1A,0x0F,0x02,0x02,0x06,0x1B,0x72,0x22,0x02,0x00}},/*"供",3*/
     
234. {{0x00,0x10,0x08,0xBC,0x87,0x82,0x88,0x88,0x9F,0xA4,0xA4,0xA4,0x22,0x32,0x00,0x00},
     
235. {0x00,0x00,0x80,0x9F,0x40,0x20,0x10,0x0E,0x10,0x20,0x60,0xCF,0x40,0x00,0x00,0x00}},/*"货",4*/
     
236. {{0x00,0x04,0xE4,0x24,0x24,0xAC,0x74,0x25,0x26,0x74,0xAC,0x24,0xE4,0x04,0x00,0x00},
     
237. {0x00,0x00,0xFF,0x01,0x01,0x3F,0x09,0x09,0x09,0x1F,0x41,0x80,0x7F,0x00,0x00,0x00}}};/*"商",5*/
     
238. unsigned char code HUANYIN[4][2][16]=
     
239. {{
     
240. {0x14,0x24,0x44,0x84,0x64,0x1C,0x20,0x18,0x0F,0xE8,0x08,0x08,0x28,0x18,0x08,0x00},
     
241. {0x20,0x10,0x4C,0x43,0x43,0x2C,0x20,0x10,0x0C,0x03,0x06,0x18,0x30,0x60,0x20,0x00}},/*"欢",0*/{
     
242. {0x40,0x41,0xCE,0x04,0x00,0xFC,0x04,0x02,0x02,0xFC,0x04,0x04,0x04,0xFC,0x00,0x00},
     
243. {0x40,0x20,0x1F,0x20,0x40,0x47,0x42,0x41,0x40,0x5F,0x40,0x42,0x44,0x43,0x40,0x00}},/*"迎",1*/{
     
244. {0x40,0x20,0xF0,0x1C,0x07,0xF2,0x94,0x94,0x94,0xFF,0x94,0x94,0x94,0xF4,0x04,0x00},
     
245. {0x00,0x00,0x7F,0x00,0x40,0x41,0x22,0x14,0x0C,0x13,0x10,0x30,0x20,0x61,0x20,0x00}},/*"使",2*/{
     
246. {0x00,0x00,0x00,0xFE,0x22,0x22,0x22,0x22,0xFE,0x22,0x22,0x22,0x22,0xFE,0x00,0x00},
     
247. {0x80,0x40,0x30,0x0F,0x02,0x02,0x02,0x02,0xFF,0x02,0x02,0x42,0x82,0x7F,0x00,0x00}}};/*"用",3*/
     
248. unsigned char code HENFENG[6][2][16]=
     
249. {{
     
250. {0x00,0x00,0x00,0xF8,0x48,0x48,0x4C,0x4B,0x4A,0x48,0x48,0x48,0xF8,0x00,0x00,0x00},
     
251. {0x00,0x00,0x00,0xFF,0x44,0x44,0x44,0x44,0x44,0x44,0x44,0x44,0xFF,0x00,0x00,0x00}},/*"自",0*/  
     
252. {{0x20,0x24,0x24,0xE4,0x24,0x24,0x24,0x20,0x10,0x10,0xFF,0x10,0x10,0xF0,0x00,0x00},
     
253. {0x08,0x1C,0x0B,0x08,0x0C,0x05,0x4E,0x24,0x10,0x0C,0x03,0x20,0x40,0x3F,0x00,0x00}},/*"动",1*/
     
254. {{0x08,0x08,0x08,0xFF,0x88,0x48,0x00,0x98,0x48,0x28,0x0A,0x2C,0x48,0xD8,0x08,0x00},
     
255. {0x02,0x42,0x81,0x7F,0x00,0x00,0x40,0x42,0x42,0x42,0x7E,0x42,0x42,0x42,0x40,0x00}},/*"控",2*/
     
256. {{0x00,0x50,0x4F,0x4A,0x48,0xFF,0x48,0x48,0x48,0x00,0xFC,0x00,0x00,0xFF,0x00,0x00},
     
257. {0x00,0x00,0x3F,0x01,0x01,0xFF,0x21,0x61,0x3F,0x00,0x0F,0x40,0x80,0x7F,0x00,0x00}},/*"制",3*/
     
258. {{0x00,0x00,0x02,0x22,0xB2,0xAA,0x66,0x62,0x22,0x11,0x4D,0x81,0x01,0x01,0x00,0x00},
     
259. {0x00,0x40,0x21,0x13,0x09,0x05,0x41,0x81,0x7F,0x01,0x05,0x09,0x13,0x62,0x00,0x00}},/*"系",4*/
     
260. {{0x20,0x30,0x2C,0xA3,0x60,0x10,0x84,0xC4,0xA4,0x9D,0x86,0x84,0xA4,0xC4,0x84,0x00},
     
261. {0x20,0x22,0x23,0x12,0x12,0x92,0x40,0x30,0x0F,0x00,0x00,0x3F,0x40,0x41,0x70,0x00}}};/*"统",5*/
     
262. unsigned char code CHUSHI[8][2][16]=
     
263. {{
     
264. {0x00,0x08,0x88,0xC9,0x2E,0x98,0x48,0x00,0x08,0x08,0xF8,0x08,0x08,0xFC,0x08,0x00},
     
265. {0x02,0x01,0x00,0x7F,0x01,0x02,0x44,0x20,0x10,0x0C,0x03,0x20,0x40,0x3F,0x00,0x00}},/*"初",0*/
     
266. {{0x10,0x90,0x70,0x1F,0x12,0xF0,0x00,0x20,0x70,0x28,0x27,0x22,0x28,0x70,0x20,0x00},
     
267. {0x40,0x21,0x12,0x0C,0x06,0x09,0x30,0x00,0x7F,0x21,0x21,0x21,0x21,0x7F,0x00,0x00}},/*"始",1*/
     
268. {{0x80,0x40,0x20,0xF8,0x07,0x02,0x00,0x00,0xFF,0xC0,0x60,0x30,0x1C,0x08,0x00,0x00},
     
269. {0x00,0x00,0x00,0x7F,0x00,0x04,0x02,0x01,0x3F,0x40,0x40,0x40,0x40,0x78,0x00,0x00}},/*"化",2*/
     
270. {{0x00,0x00,0xFC,0x08,0x08,0x08,0x08,0xFF,0x08,0x08,0x08,0x08,0xFC,0x08,0x00,0x00},
     
271. {0x00,0x00,0x07,0x02,0x02,0x02,0x02,0xFF,0x02,0x02,0x02,0x02,0x07,0x00,0x00,0x00}},/*"中",3*/
     
272. {{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
     
273. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},/*" ",1*/
     
274. {{0x40,0x42,0x4C,0xC4,0x00,0x22,0xAA,0xAA,0xAA,0xBF,0xAA,0xAA,0xAA,0x22,0x20,0x00},
     
275. {0x00,0x00,0x00,0x7F,0x20,0x10,0xFF,0x0A,0x0A,0x0A,0x4A,0x8A,0x7F,0x00,0x00,0x00}},/*"请",2*/
     
276. {{0x00,0x12,0x92,0x72,0xFF,0x51,0x81,0xF2,0x9C,0x90,0x9F,0x90,0x98,0xF4,0x02,0x00},
     
277. {0x08,0x06,0x01,0x00,0xFF,0x00,0x00,0xFF,0x04,0x04,0x04,0x44,0x84,0x7F,0x00,0x00}},/*"稍",3*/
     
278. {{0x40,0x20,0xF8,0x07,0xF2,0x08,0x0A,0xFA,0x4A,0xCA,0x4A,0x4E,0x4A,0x48,0x08,0x00},
     
279. {0x00,0x00,0x7F,0x00,0x0F,0x42,0x23,0x12,0x0E,0x03,0x06,0x1A,0x32,0x62,0x22,0x00}}};/*"候",4*/
     
280. 
     
281. /*********************************************************************/
     
282. /*********************************************************************/
     
283. typedef struct {
     
284.                 char    hour;
     
285.                 char    minute;
     
286.                 char    second;
     
287. } time;
     
288. /*****************************/
     
289. /*******************************/
     
290. typedef struct {
     
291.                 char    year;
     
292.                 char    month;
     
293.                 char    day;
     
294. } date;
     
295. /******************************/
     
296. time now={00,00,00},display;
     
297. int   Aminute;
     
298. date today={17,04,22},tmpday;
     
299. char        ABC ;
     
300. char        ABCD;
     
301. unsigned char gx,gy;
     
302. 
     
303. 
     
304. void initFlag(void)
     
305. {
     
306.         P0 = 0xFF;                        // 输出端口初始化
     
307.           P2 = 0xFF;                        // 输出端口初始化
     
308.           P1 = 0xFF;                        // 输入端口初始化
     
309.           P3 = 0xFF;                        // 输入端口初始化               
     
310.     now.hour = 24;
     
311.     now.minute =00;
     
312.     now.second =00;
     
313. }
     
314. /**************************************************/
     
315. /***************检测忙****************************/
     
316. /************************************************/
     
317. void check_GLCD_busyflag(void)
     
318. {
     
319.        unsigned char   x;
     
320.         GLCD_R_W=1;
     
321.         GLCD_D_I=0;
     
322.         GLCD_ENABLE=1;
     
323.         P2=0x00;
     
324.         do
     
325.                 {
     
326.                 x=P2 && 128;
     
327.         } while(x);
     
328.                   GLCD_ENABLE=0;
     
329.         GLCD_D_I=1;
     
330.         GLCD_R_W=1;
     
331. }
     
332. /********************写命令**********************/
     
333. void write_GLCD_command(unsigned command)
     
334. {
     
335.                         GLCD_R_W = 0;
     
336.                  GLCD_D_I = 0;
     
337.                 GLCD_ENABLE=1;
     
338.                 P2=command;
     
339.                 GLCD_ENABLE=0;
     
340.                 GLCD_D_I=1;
     
341.                 GLCD_R_W=1;
     
342.                 check_GLCD_busyflag();   //检测忙
     
343. }
     
344. /********************写数据*********************/
     
345. void write_GLCD_data(unsigned GLCDdata)
     
346. {
     
347.                           GLCD_R_W=0;
     
348.                 GLCD_D_I=1;
     
349.                 GLCD_ENABLE=1;
     
350.                 P2=GLCDdata;
     
351.                 GLCD_ENABLE=0;
     
352.                 GLCD_D_I=0;
     
353.                 GLCD_R_W=1;
     
354.                 check_GLCD_busyflag(); //检测忙
     
355. }
     
356. /*********************清屏**********************/        
     
357. void clear_GLCD()
     
358. {
     
359.         int     i,j;
     
360.         GLCD_CS1=1;
     
361.         GLCD_CS2=1;
     
362.         write_GLCD_command(GLCD_ON);   
     
363.         write_GLCD_command(GLCD_START_LINE_0);
     
364.         for(i=0;i<8;i++)
     
365.         {
     
366.                 write_GLCD_command(SET_PAGE+i);
     
367.                 write_GLCD_command(SET_Y_ADDRESS_0);   
     
368.                 for(j=0;j<64;j++)
     
369.                 write_GLCD_data(0);
     
370.         }               
     
371. }
     
372. /*******************显示一个圆形****************/
     
373. void show_pattern(unsigned char page,unsigned char y,unsigned char *pattern,unsigned char len)
     
374. {
     
375.         int i;
     
376.         write_GLCD_command(SET_PAGE+page);      
     
377.         write_GLCD_command(SET_Y_ADDRESS_0+y);  
     
378.         for(i=0;i<len;i++)
     
379.         {
     
380.                 write_GLCD_data(*pattern);
     
381.                 pattern++;
     
382.         }
     
383. }
     
384. /*********************显示一个字****************/
     
385. void display_GLCD_data(unsigned char *p)
     
386. {                        
     
387.           if (gx<64)
     
388.                                 {
     
389.                           GLCD_CS1=1;
     
390.                           GLCD_CS2=0;
     
391.                           show_pattern(gy,gx,p,8);
     
392.                           show_pattern(gy,gx+8,p+8,8);
     
393.                           show_pattern(gy+1,gx,p+16,8);
     
394.                           show_pattern(gy+1,gx+8,p+24,8);
     
395.                         }
     
396.                 else
     
397.                         {
     
398.                           GLCD_CS1=0;
     
399.                           GLCD_CS2=1;
     
400.                           show_pattern(gy,gx-64,p,8);
     
401.                           show_pattern(gy,gx-56,p+8,8);
     
402. 
     
403.                           show_pattern(gy+1,gx-64,p+16,8);
     
404.                           show_pattern(gy+1,gx-56,p+24,8);
     
405.                         }
     
406.         gx=gx+16;
     
407. }
     
408. void display_GLCD_string(unsigned char *p,int len)
     
409. {
     
410.          int i;
     
411.                 for(i=0;i<len;i++)
     
412.                 display_GLCD_data((p+32*i));
     
413. }
     
414. 
     
415. void display_GLCD_numberAB(char number)
     
416. {
     
417.         int x,y;
     
418.         x=number/10;
     
419.         y=number%10;
     
420.         display_GLCD_data(*digit[x]);
     
421.         display_GLCD_data(*digit[y]);
     
422. }
     
423. 
     
424. void display_GLCD_numberB(char number)
     
425. {
     
426.          unsigned int x,y,z,j;               
     
427.         x=(number/1000)%10;
     
428.         y=(number/100)%10;
     
429.                 z=(number/10)%10;
     
430.                 j=number%10;
     
431.         display_GLCD_data(*digit[x]);
     
432.         display_GLCD_data(*digit[y]);
     
433.                 display_GLCD_data(*digit[z]);
     
434.         display_GLCD_data(*digit[j]);
     
435. }
     
436. 
     
437. void gotoxy(unsigned x,unsigned y)
     
438. {
     
439.         gy=y;
     
440.         gx=x;
     
441. }
     
442. 
     
443. void display_time(time dispaly_time)
     
444. {
     
445.         gotoxy(0,4);
     
446.         display_GLCD_numberAB(dispaly_time.hour);
     
447.         display_GLCD_data(comma);
     
448.         display_GLCD_numberAB(dispaly_time.minute);
     
449.         display_GLCD_data(comma);
     
450.         display_GLCD_numberAB(dispaly_time.second);
     
451. }
     
452. 
     
453. void display_time1(int F)
     
454. {
     
455.         gotoxy(48,6);        
     
456.              display_GLCD_numberB(F);  
     
457. }
     
458. 
     
459. /******************定时器0初始化*********************************************/
     
460. void initTimer (void)
     
461. {
     
462.          timer0_tick=0;
     
463.         EA=0;
     
464.          TMOD=0x11;
     
465.         TH0=-9460/256;
     
466.         TL0=-9460%256;         //初始化计数器初值
     
467. 
     
468.         PT0=1;
     
469.         TR0=1;
     
470.         ET0=1;
     
471.          
     
472.     EA =1;
     
473. }
     
474. /******************定时器0中断处理程序*********************************************/
     
475. //用于时钟
     
476. void timer0 (void) interrupt 1
     
477. {         
     
478.         TR0=0;
     
479.     TH0=-9460/256;
     
480.         TL0=-9460%256;         //初始化计数器初值        
     
481.     TR0=1;
     
482.     timer0_tick++;
     
483.         if (timer0_tick==100)
     
484.    {
     
485.         timer0_tick=0;
     
486.                 /***********************************************************/                        
     
487.                 if(now.second==0)
     
488.                            {
     
489.                                            now.second=59;            
     
490.                             if (now.minute==0)
     
491.                                       {
     
492.                                                now.minute=59;                     
     
493.                                                         if (now.hour==0)
     
494.                                                   {
     
495.                                                                         now.hour = 24;
     
496.                                                                 now.minute =00;
     
497.                                                                 now.second =00;                                                                          
     
498.                                                   }else now.hour--;
     
499.                                        }else now.minute--;                     
     
500.                            }else  now.second--;                                 
     
501.                
     
502.                 if(Aminute==10000)Aminute=0;
     
503.                         else Aminute++;        
     
504.                   
     
505.   }            
     
506. }
     
507. 
     
508. 
     
509. /******************************************************************/
     
510. /***********************主程序*************************************/
     
511. /******************************************************************/
     
512. void MAIN (void)
     
513. {
     
514. 
     
515.            unsigned int i,j;               
     
516.         initFlag ();                                                        //端口初始化
     
517.         clear_GLCD();                                                        //清屏
     
518.              gotoxy(0,0);
     
519.                  display_GLCD_string(QINGPIN,8);         //把不显示的位置显示空白
     
520.                  gotoxy(0,2);
     
521.                  display_GLCD_string(QINGPIN,8);
     
522.                  gotoxy(0,4);
     
523.                  display_GLCD_string(QINGPIN,8);
     
524.                  gotoxy(0,6);
     
525.                  display_GLCD_string(QINGPIN,8);                                                  
     
526. 
     
527.                  gotoxy(32,0);                                                   //设光标
     
528.             display_GLCD_string(HUANYIN,4);         //显示"欢迎使用"字符串
     
529.               gotoxy(16,2);                                                   //设光标
     
530.               display_GLCD_string(HENFENG,6);            //显示"控制系统"字符串
     
531.               gotoxy(0,4);                                                   //设光标
     
532.               display_GLCD_string(CHUSHI,8);                    //显示"初始化"字符串
     
533.                     
     
534.                 for (i=0;i<1000;i++)                                //延时
     
535.                 for(j=0;j<200;j++);                                 
     
536.                 initTimer();                                                 //开中断
     
537.                 WDTRST=0x1E;                                           //打开看门狗
     
538.             WDTRST=0xE1;
     
539.         while(1)                                       
     
540.                 {                                       
     
541.                                                                 WDTRST=0x1E;                                           //打开看门狗
     
542. ……………………
     
543. 
     
544. …………限于本文篇幅 余下代码请从51黑下载附件…………
     

复制代码

所有资料51hei提供下载:
51单片机控制12864液晶(程序 仿真电路).rar (244.87 KB, 下载次数: 34)

2018-4-30 19:40 上传

点击文件名下载附件
下载积分: 黑币 -5

---

作者: suph007    时间: 2018-5-6 12:34
今天一下子 看了多篇，这篇正是我需要的思路

---

欢迎光临 (http://www.51hei.com/bbs/)

Powered by Discuz! X3.1