stm32单片机控制迪文串口屏源代码 -

#include "stm32f10x.h"
#include "stm32f10x_it.h"
#include "led1.h"
#include "USART.h"
//#include "stm32f10x_it.h"
#define LED_1 GPIO_Pin_6 /*DS1使用的GPIO管脚*/
#define LED_2 GPIO_Pin_7 /*DS2使用的GPIO管脚*/
extern unsigned char KeyStop_Flag;
unsigned char ii;
extern unsigned int RxBuffer1[8];
//unsigned char rec[10];
unsigned char pic[3]={0xAA,0x70,0x00}; //图片显示
unsigned char end[4]={0xCC,0x33,0xC3,0x3C}; //结束标志
//unsigned char color[6]={0xAA,0x40,0xF8,0x00,0x00,0x1F}; //设置当前调色板
//unsigned char qiewb[15]={0xAA,0x71,0,0x00,0x00,0x01,0xB5,0x02,0x80,0x01,0xE0,0x00,0x00,0x01,0xB5}; //剪切图片显示
void Delay(vu32 nCount);
void en(void)
{
USART1WriteDat(end,4);
}
int main(void)
{
BSP_LED_Init();
USART_Configuration();
NVIC_Configuration();
ii=0;
// BSP_LED_On();
// BSP_LED_Init(LED_2);
while(1)
{
// USART1_Putc(0x06);
// USART1_Puts("yanghai haha\n");
if(KeyStop_Flag==0)
{
pic[2]=ii;
USART1WriteDat(pic,3);
en();
ii++;
if(ii==13)
{
ii=0;
}
}
//while(KeyStop_Flag);
BSP_LED_Off();
Delay(0x4FFFFF);
BSP_LED_On();
Delay(0x4FFFFF);
}
}
/*******************************************************************************
* Function Name : Delay
……………………
…………限于本文篇幅余下代码请从51黑下载附件…………

复制代码