51单片机_六位数码管秒表_开发板制作_秒表定时器 -

标题: 51单片机_六位数码管秒表_开发板制作_秒表定时器 [打印本页]

作者: 我_I_NI 时间: 2018-10-28 21:47
标题: 51单片机_六位数码管秒表_开发板制作_秒表定时器
以下是代码，可以自行更改端口
#include<reg52.h>
#define uchar unsigned char
#define uint unsigned int
sbit dula=P2^6;                      //声明u1锁存器端口
sbit wela=P2^7;                      // u2
sbit pausekey=P3^4;                   //按键端口

int num0,num1,num2;
uchar sh0,sh1,sh2,ge0,ge1,ge2;

uchar code table[]={
  0x3f,0x06,0x5b,0x4f,
0x66,0x6d,0x7d,0x07,
0x7f,0x6f,0x77,0x7c,
0x39,0x5e,0x79,0x71};

void delayms(uint xms)             //延时
{
uint i,k;
for(i=xms;i>0;i--)
   for(k=110;k>0;k--)  ;
}

void init()                         //初始化
{
TMOD=0x10;                   //设置定时器1工作方式1
TH1=(65536-9175)/256;             //10ms
TL1=(65536-9175)%256;
EA=1;
ET1=1;
}

void keyscan() //键盘输入
{
if(pausekey==0)
{
delayms(10);
if(pausekey==0)
{
while(!pausekey);          //持续按着
TR1=~TR1;                   //启动或停止定时器1
}
}
}

void display(uchar sh0,uchar sh1,uchar sh2,
   uchar ge0,uchar ge1,uchar ge2) //显示
{
dula=1;
P0=table[ge0];
dula=0;
P0=0xff;
wela=1;
P0=0xdf;
wela=0;
delayms(5);

dula=1;
P0=table[sh0];
dula=0;
P0=0xff;
wela=1;
P0=0xef;
wela=0;
delayms(5);

dula=1;
P0=table[ge1];
dula=0;
P0=0xff;
wela=1;
P0=0xf7;
   wela=0;
delayms(5);

dula=1;
P0=table[sh1];
dula=0;
P0=0xff;
wela=1;
P0=0xfb;
delayms(5);

dula=1;
P0=table[ge2];
dula=0;
P0=0xff;
wela=1;
P0=0xfd;
wela=0;
delayms(5);

dula=1;
P0=table[sh2];
dula=0;
P0=0xff;
wela=1;
P0=0xfe;
wela=0;
delayms(5);
}

void T1_time() interrupt 3
{
TH1=(65536-9175)/256;    //重装初值
TL1=(65536-9175)%256;
num0++;
if(num0==100)
{
num1++;
num0=0;
}
if(num1==60)
{
num2++;
num1=0;
}
if(num2==100)
{
num0=0;
num1=0;
num2=0;
}

sh0=num0/10;
      ge0=num0%10;
      sh1=num1/10;
      ge1=num1%10;
      sh2=num2/10;
      ge2=num2%10;
}

void main()
{
init();
while(1)
{
keyscan();
display(sh0,sh1,sh2,ge0,ge1,ge2);
}
}

欢迎光临 (http://www.51hei.com/bbs/)