esp8266关于arduino的一些测试文件 -

void setup() {
inputString.reserve(20);
swSerial.begin(9600);
Serial.begin(9600);
while (!Serial)
;
Serial.println("Starting wifi");
wifi.setTransportToTCP();// this is also default
// wifi.setTransportToUDP();//Will use UDP when connecting to server, default is TCP
wifi.endSendWithNewline(true); // Will end all transmissions with a newline and carrage return ie println.. default is true
wifi.begin();
//Turn on local ap and server (TCP)
wifi.startLocalAPAndServer("MY_CONFIG_AP", "password", "5", "2121");
wifi.connectToAP("wifissid", "wifipass");
wifi.connectToServer("192.168.0.28", "2121");
wifi.send(SERVER, "ESP8266 test app started");
}
void loop() {
//Make sure the esp8266 is started..
if (!wifi.isStarted())
wifi.begin();
//Send what you typed in the arduino console to the server
static char buf[20];
if (stringComplete) {
inputString.toCharArray(buf, sizeof buf);
wifi.send(SERVER, buf);
inputString = "";
stringComplete = false;
}
//Send a ping once in a while..
if (millis() > nextPing) {
wifi.send(SERVER, "Ping ping..");
nextPing = millis() + 10000;
}
//Listen for incoming messages and echo back, will wait until a message is received, or max 6000ms..
WifiMessage in = wifi.listenForIncomingMessage(6000);
if (in.hasData) {
if (in.channel == SERVER)
Serial.println("Message from the server:");
else
Serial.println("Message a local client:");
Serial.println(in.message);
//Echo back;
wifi.send(in.channel, "Echo:", false);
wifi.send(in.channel, in.message);
nextPing = millis() + 10000;
}
//If you want do disconnect from the server use:
// wifi.disconnectFromServer();
}

复制代码