PIC单片机+LCD12864显示汉字程序 -

标题: PIC单片机+LCD12864显示汉字程序 [打印本页]

作者: jinsheng7533967 时间: 2018-12-21 23:33
标题: PIC单片机+LCD12864显示汉字程序

#include<pic.h>
#define RS RD2
#define CS2 RD1
#define CS1 RD0
#define E RD4
#define RW RD3
#define BUSY RC7
const unsigned char tab2[]={
/*--  文字:  福  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x08,0x08,0x89,0xCE,0x28,0x18,0x02,0x7A,0x4A,0x4A,0x4A,0x4A,0x4A,0x7A,0x02,0x00,
0x02,0x01,0x00,0xFF,0x01,0x02,0xFF,0x49,0x49,0x49,0x7F,0x49,0x49,0x49,0xFF,0x00,

/*--  文字:  建  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x42,0x62,0x5A,0xC6,0x10,0x54,0x54,0x54,0xFF,0x54,0x54,0x7C,0x10,0x10,0x00,
0x40,0x23,0x14,0x08,0x17,0x28,0x29,0x49,0x49,0x7F,0x49,0x49,0x49,0x49,0x40,0x00,

/*--  文字:  工  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x02,0x02,0x02,0x02,0x02,0xFE,0x02,0x02,0x02,0x02,0x02,0x02,0x00,0x00,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00,

/*--  文字:  程  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x10,0x12,0xD2,0xFE,0x91,0x11,0x80,0xBF,0xA1,0xA1,0xA1,0xA1,0xBF,0x80,0x00,0x00,
0x04,0x03,0x00,0xFF,0x00,0x41,0x44,0x44,0x44,0x7F,0x44,0x44,0x44,0x44,0x40,0x00,

/*--  文字:  学  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x40,0x30,0x10,0x12,0x5C,0x54,0x50,0x51,0x5E,0xD4,0x50,0x18,0x57,0x32,0x10,0x00,
0x00,0x02,0x02,0x02,0x02,0x02,0x42,0x82,0x7F,0x02,0x02,0x02,0x02,0x02,0x02,0x00,

/*--  文字:  院  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0xFE,0x02,0x32,0x4A,0x86,0x0C,0x24,0x24,0x25,0x26,0x24,0x24,0x24,0x0C,0x04,0x00,
0xFF,0x00,0x02,0x04,0x83,0x41,0x31,0x0F,0x01,0x01,0x7F,0x81,0x81,0x81,0xF1,0x00,

/*--  文字:  ，  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x58,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  环  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x22,0x22,0xFE,0x22,0x22,0x00,0x02,0xC2,0x32,0xFE,0x42,0x82,0x02,0x02,0x00,
0x00,0x04,0x04,0x03,0x12,0x0A,0x04,0x03,0x00,0x00,0xFF,0x00,0x00,0x03,0x0E,0x00,

/*--  文字:  境  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x20,0x20,0xFE,0x20,0x20,0x00,0x24,0xAC,0xB4,0xA5,0xA6,0xB4,0xAC,0x24,0x00,0x00,
0x10,0x30,0x1F,0x08,0x08,0x00,0x80,0x4F,0x3A,0x0A,0x0A,0x7A,0x8F,0x80,0xE0,0x00,

/*--  文字:  优  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x40,0x20,0xF8,0x17,0x02,0x10,0x10,0xF0,0x1F,0xF0,0x12,0x1C,0x14,0x10,0x00,0x00,
0x00,0x00,0xFF,0x00,0x40,0x20,0x18,0x07,0x00,0x3F,0x40,0x40,0x40,0x78,0x20,0x00,

/*--  文字:  美  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x84,0x84,0x94,0x95,0x96,0x94,0xFC,0x94,0x96,0x95,0x94,0x94,0x84,0x80,0x00,
0x80,0x80,0x44,0x44,0x24,0x14,0x0C,0x07,0x0C,0x14,0x24,0x64,0xC4,0x44,0x00,0x00,

/*--  文字:  ，  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x58,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  历  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0xFE,0x02,0x22,0x22,0x22,0x22,0xFA,0x22,0x22,0x22,0xE2,0x02,0x02,0x00,
0x40,0x30,0x0F,0x00,0x40,0x20,0x18,0x06,0x01,0x00,0x20,0x60,0x3F,0x00,0x00,0x00,

/*--  文字:  史  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0xF8,0x88,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x88,0xF8,0x00,0x00,0x00,
0x80,0x80,0x41,0x40,0x22,0x14,0x08,0x17,0x20,0x20,0x20,0x40,0x41,0xC0,0x40,0x00,

/*--  文字:  悠  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x20,0x10,0xFC,0x03,0xF8,0x20,0x10,0x0C,0x17,0xA4,0x44,0xB4,0x0C,0x04,0x04,0x00,
0x40,0x70,0x03,0x00,0x38,0x40,0x40,0x45,0x59,0x40,0x40,0x70,0x01,0x13,0x61,0x00,

/*--  文字:  久  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x80,0x40,0x30,0x0C,0x0B,0x08,0xC8,0xBC,0x08,0x00,0x00,0x00,0x00,0x00,
0x40,0x41,0x20,0x20,0x10,0x08,0x04,0x03,0x00,0x01,0x06,0x18,0x30,0x60,0x20,0x00,

/*--  文字:  。  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x18,0x24,0x24,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  欢  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x14,0x24,0x44,0x84,0x64,0x1C,0x20,0x18,0x0F,0xE8,0x08,0x08,0x28,0x18,0x08,0x00,
0x20,0x10,0x4C,0x43,0x43,0x2C,0x20,0x10,0x0C,0x03,0x06,0x18,0x30,0x60,0x20,0x00,

/*--  文字:  迎  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x40,0x41,0xCE,0x04,0x00,0xFC,0x04,0x02,0x02,0xFC,0x04,0x04,0x04,0xFC,0x00,0x00,
0x40,0x20,0x1F,0x20,0x40,0x47,0x42,0x41,0x40,0x5F,0x40,0x42,0x44,0x43,0x40,0x00,

/*--  文字:  你  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x80,0x40,0xF0,0x2C,0x43,0x20,0x98,0x0F,0x0A,0xE8,0x08,0x88,0x28,0x1C,0x08,0x00,
0x00,0x00,0x7F,0x00,0x10,0x0C,0x03,0x21,0x40,0x3F,0x00,0x00,0x03,0x1C,0x08,0x00,

/*--  文字:  的  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0xF8,0x8C,0x8B,0x88,0xF8,0x40,0x30,0x8F,0x08,0x08,0x08,0x08,0xF8,0x00,0x00,
0x00,0x7F,0x10,0x10,0x10,0x3F,0x00,0x00,0x00,0x03,0x26,0x40,0x20,0x1F,0x00,0x00,

/*--  文字:  到  --*/
0x00,0x22,0x72,0x2A,0x26,0xE2,0x2A,0x72,0x22,0x00,0xF8,0x00,0x00,0xFF,0x00,0x00,
0x00,0x42,0xC2,0x42,0x22,0x3F,0x22,0x12,0x12,0x00,0x0F,0x40,0x80,0x7F,0x00,0x00,

/*--  文字:  来  --*/
0x00,0x80,0x84,0x84,0x94,0xA4,0xC4,0xFF,0x84,0xC4,0xB4,0x94,0x84,0x84,0x80,0x00,
0x20,0x20,0x10,0x10,0x08,0x04,0x02,0xFF,0x01,0x02,0x04,0x08,0x18,0x30,0x10,0x00,
/*--  文字:  ！  --*/
0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x5F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  电  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0xF8,0x48,0x48,0x48,0x48,0xFF,0x48,0x48,0x48,0x48,0xF8,0x00,0x00,0x00,
0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0x3F,0x44,0x44,0x44,0x44,0x4F,0x40,0x70,0x00,

/*--  文字:  子  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x02,0x02,0x02,0x02,0x02,0xE2,0x12,0x0A,0x06,0x02,0x00,0x80,0x00,0x00,
0x01,0x01,0x01,0x01,0x01,0x41,0x81,0x7F,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,

/*--  文字:  信  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x80,0x40,0x30,0xFC,0x07,0x0A,0xA8,0xA8,0xA9,0xAE,0xAA,0xA8,0xA8,0x08,0x08,0x00,
0x00,0x00,0x00,0x7F,0x00,0x00,0x7E,0x22,0x22,0x22,0x22,0x22,0x7E,0x00,0x00,0x00,

/*--  文字:  息  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x00,0xFC,0x54,0x54,0x56,0x55,0x54,0x54,0x54,0xFC,0x00,0x00,0x00,0x00,
0x00,0x20,0x38,0x01,0x3D,0x41,0x41,0x45,0x59,0x41,0x41,0x71,0x00,0x08,0x30,0x00,

/*--  文字:  工  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x02,0x02,0x02,0x02,0x02,0xFE,0x02,0x02,0x02,0x02,0x02,0x02,0x00,0x00,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00,

/*--  文字:  程  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x10,0x12,0xD2,0xFE,0x91,0x11,0x80,0xBF,0xA1,0xA1,0xA1,0xA1,0xBF,0x80,0x00,0x00,
0x04,0x03,0x00,0xFF,0x00,0x41,0x44,0x44,0x44,0x7F,0x44,0x44,0x44,0x44,0x40,0x00,

/*--  文字:  ！  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x5F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*--  文字:    --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};

//写指令代码（左）
void l_w_code(char l_code)
{
      //check_busy();
      PORTD=0x12;
      PORTC=l_code;
      E=1;
      E=0;
      asm("nop");
}

//写显示数据（左）
void l_w_data(char l_data)
{
      //check_busy();
      PORTD=0x16;
      PORTC=l_data;
      E=1;
      E=0;
      asm("nop");
}
//写指令代码（右）
void r_w_code(char       r_code)
{
      //check_busy();
      PORTD=0x11;
      PORTC=r_code;
      E=1;
      E=0;
      //asm("nop");
}

//写显示数据（右）
void r_w_data(char r_data)
{
      //check_busy();
      PORTD=0x15;
      PORTC=r_data;
      E=1;
      E=0;
      asm("nop");
}
void initializeLCD(void)
{
      l_w_code(0x3f);
      l_w_code(0xc0);
      l_w_code(0xb8);
      l_w_code(0x40);
      r_w_code(0x3f);
      r_w_code(0xc0);
      r_w_code(0xb8);
      r_w_code(0x80);
}

void l_display(void)
{
      unsigned char m,n;
unsigned char i;
unsigned char x=0xb8;
unsigned char y=0x40;
      unsigned int k=0;
      //k=0;
l_w_code(x);                      //写入页地址
l_w_code(y);                      //第一列开始
for(i=0;i<4;i++)
{

      for(y=0x40;y<0x80;y+=0x10)
      {
      for (m=0;m<2;m++)
      {
         l_w_code(x);                      //写入页地址
         l_w_code(y);                      //第一列开始
         for(n=0;n<16;n++)
         {
                        l_w_data(tab2[k++]);
         }
            x+=0x01;
      }
      x=x-0x02;
   }

   for(y=0x40;y<0x80;y+=0x10)
      {
      for (m=0;m<2;m++)
      {
         r_w_code(x);                      //写入页地址
         r_w_code(y);                      //第一列开始
         for(n=0;n<16;n++)
         {
                     r_w_data(tab2[k++]);
         }
         x+=0X01;
      }
      x-=0x02;
   }
x+=0x02;
}
}
void delaycnt(unsigned int cnt)
{
      while(--cnt);
}
void main(void)
{
      //port_init();
      TRISC=0X00;
      TRISD=0X00;
      initializeLCD();
      while(1)
      {
            l_display();
         delaycnt(65535);

      }
}

PIC显示汉字.rar (3.84 KB, 下载次数: 102)

作者: shuisheng60 时间: 2019-2-3 21:13
做的很漂亮,收下了

作者: Trump1438 时间: 2019-2-7 00:04
好样的,这就是所要的

作者: sheng7533967 时间: 2019-2-7 00:32
真的不错!值得学习了

作者: #include51.h 时间: 2019-2-7 15:09
这就是很好的!

作者: 站着说话不腰疼 时间: 2019-2-9 14:00
非常好的东东

作者: Jiazz0813 时间: 2019-4-10 19:28
您的原理图是什么软件画的？

作者: Yunuis 时间: 2019-6-6 15:10
您的原理图是什么软件画的？

作者: wxbdcmh 时间: 2020-4-1 21:30
做的漂亮

作者: wlgzy17 时间: 2020-4-14 17:32
支持，PIC单片机的资料不太多。

作者: fyz907303642 时间: 2021-9-8 20:09

Yunuis 发表于 2019-6-6 15:10
您的原理图是什么软件画的？

PROTEUS软件

欢迎光临 (http://www.51hei.com/bbs/)