nrf24l01无线芯片的开发板范例-AVR（已验证通过） -

标题: nrf24l01无线芯片的开发板范例-AVR（已验证通过） [打印本页]

作者: zhangjin123 时间: 2019-4-2 19:25
标题: nrf24l01无线芯片的开发板范例-AVR（已验证通过）
#include "main.h"
#include "nRF24L01.h"

/*Bit field operations*/
#define SetBit( Byte, Bit )  ( Byte ) |= ( 1<<( Bit ) )
#define ClrBit( Byte, Bit )  ( Byte ) &= ~( 1<<( Bit ) )
#define GetBit( Byte, Bit )  ( ( Byte ) & ( 1<<( Bit ) ) )
#define ComBit( Byte, Bit )  ( Bytes ) ^= ( 1<<( Bit ) )
#define SetBits( Byte, Bits ) ( Byte ) |= ( Bits )
#define ClrBits( Byte, Bits ) ( Byte ) &= ~( Bits )
#define GetBits( Byte, Bits ) ( ( Byte ) & ( Bits ) )
#define ComBits( Byte, Bits ) ( Byte ) ^= ( Bits )

#define M32_MOSI PB5
#define M32_MISO PB6
#define M32_SCK PB7
/*
================================================================================
Function : USART_SendChar( )
Description: Send a single byte via the USART
InPut    : -dt, The value you want to send
Output    : None
================================================================================
*/
void USART_SendChar( unsigned char dt )
{
UCSRA |= ( 1<<TXC );
UDR = dt;
while( !( UCSRA & ( 1<<TXC ) ) );
}
/*
================================================================================
Function : USART_SendArray( )
Description: Send a array of data via the USART port
InPut    : -pBuff, The buffer to store the data
         -nBytes, How many bytes do you want to send ?
Output    : None
================================================================================
*/
void USART_SendArray( unsigned char* pBuff, unsigned char nBytes )
{
unsigned char btmp;
for( btmp = 0; btmp < nBytes; btmp ++ )
{
USART_SendChar( *( pBuff + btmp ) );
}
}
/*
================================================================================
Function : USART_SendStr( )
Description: Send a string of data via the USART port
InPut    : pstr->the string to be sent
Output    : None
================================================================================
*/
void USART_SendStr( char *pstr )
{
while( *pstr )
{
      USART_SendChar( *pstr++ );
}
}
/*
================================================================================
Function : USART_Init( ),
Description: Initialize the USART port
InPut    : None
Output    : None
================================================================================
*/
#define Bandrate 9600
#define F_CPU    12000000
void USART_Init( void )
{

UCSRB = 0x00; //disable while setting baud rate
UCSRA = 0x00;
UCSRC = 0x86;
UBRRL = ( F_CPU / 16 / Bandrate - 1 ) % 256;
UBRRH = ( F_CPU / 16 / Bandrate - 1 ) >> 8;
UCSRB = 0x98;

}
/*
================================================================================
Function : SPI_Init( )
Description : Initialize the SPI bus
Input : None
Output: None
================================================================================
*/
/*void SPI_Init( void )
{
//IO config
PORTB |= ( 1<<0 ) | ( 1<<5 ) | ( 1<<3 ) | ( 1<<2 ) | ( 1<<4 );
DDRB |= ( 1<<0 ) | ( 1<<2 ) | ( 1<<3 ) | ( 1<<5 );
DDRB &= ~( 1<<4 );
SPCR = (1<<SPE) | (1<<MSTR);
}*/

void SPI_Init( void )
{
/*IO config*/
PORTB |= ( 1<<0 ) | ( 1<<5 ) | ( 1<<6 ) | ( 1<<7 ) | ( 1<<4 );
DDRB |= ( 1<<7 ) | ( 1<<5 ) | ( 1<<0 ) | ( 1<<4 );
DDRB &= ~( 1<<6 );
SPCR = (1<<SPE) | (1<<MSTR);
}
/*
================================================================================
Function : SPI_ExchangeByte( )
Description : Exchange a byte via the SPI bus
Input : -value, The byte sent
Output: The byte read.
================================================================================
*/
INT8U SPI_ExchangeByte( INT8U value )
{
SPDR = value;
while ( !(SPSR & (1<<SPIF)) );
return SPDR;
}

INT8U testbuffer[32];
int main( void )
{
INT8U tmp;
unsigned char ReplayData[] = {"我很好！\r\n"};

SPI_Init( );
USART_Init( );
L01_Init( );
L01_SetRXMode( );
L01_WriteHoppingPoint( 0 );
USART_SendStr( "nRF24L01P接收测试开始！\r\n" );
      while( 1 )
{
      for( tmp = 0; tmp < 32; tmp ++ )
      {
         testbuffer[tmp] = tmp+0x20;
      }
L01_FlushRX( );
L01_FlushTX( );
L01_WriteRXPayload_InAck( ReplayData, sizeof( ReplayData ) );
while( 1 )
{
tmp = L01_ReadStatusReg( );
// USART_SendChar(tmp);  //for test
tmp &= ( 1<<TX_DS ) | ( 1<<MAX_RT ) | ( 1<<RX_DR );
if( tmp != 0 )
{
break;
}
}

      if( tmp & ( 1<<TX_DS ) )
      {
      // USART_SendStr( "发送成功\r\n" );
      }
      else if( tmp & ( 1<<MAX_RT ) )
      {
      // USART_SendStr( "发送失败\r\n" );
      }
      else if( tmp & ( 1<<RX_DR )  )
      {
L01_WriteRXPayload_InAck( testbuffer, 32 );
         USART_SendStr( "收到数据:" );
tmp = L01_ReadRXPayload( testbuffer );
USART_SendArray( testbuffer, tmp );
USART_SendStr( "回复数据:" );
USART_SendStr( ( char*) ReplayData );
      }
      L01_ClearIRQ( IRQ_ALL );
}
return 0;
}

AVR_M16(ICC).rar

161.42 KB, 下载次数: 32, 下载积分: 黑币 -5

作者: wanffee 时间: 2019-4-29 09:53
买了这个模块还没开始用，正好学习一下

作者: jjj12345 时间: 2019-6-29 13:49
不错学习下

作者: youquan 时间: 2019-6-29 16:31
太好了正找这个谢谢

作者: chinabj2019 时间: 2019-6-30 13:38
版主:这是Nordic的RFID产品，该公司还有BLE4.0的nRF51822产品，版主是否也用了？很想同版主交流。

作者: jjj12345 时间: 2019-9-6 13:43
谢谢分享0

作者: leolong03 时间: 2019-12-3 11:16
AVR才开始学习，之前用PIC搞过，谢谢分享

作者: ssm_qd 时间: 2020-3-5 12:35
喜欢的内容

欢迎光临 (http://www.51hei.com/bbs/)