标题: 16灯摇摇棒单片机程序与制作资料 [打印本页]

---

作者: 773526042    时间: 2019-5-28 22:59
标题: 16灯摇摇棒单片机程序与制作资料

1. #include <AT89X52.h>
   
2. #define uchar unsigned char
   
3. #define uint unsigned int    //宏定义
   
4. #define KEY P3_7      //定义画面切换按键
   
5. uchar KY;    //KY作用在后面说明     
   
6. uchar disp;     //显示汉字指针
   
7. uchar pic=0,num=0;     //pic为按键次数；num为中断次数
   
8. 
   
9. 
   
10. uchar code love[] = {
    
11. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    
12. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x3F,0x00,0x20,0x00,0x20,0x00,0x20,
    
13. 0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x0F,
    
14. 0x04,0x10,0x02,0x20,0x02,0x20,0x02,0x20,0x02,0x20,0x04,0x10,0xF8,0x0F,0x00,0x00,
    
15. 0x00,0x00,0x00,0x00,0xFE,0x07,0x00,0x08,0x00,0x10,0x00,0x20,0x00,0x20,0x00,0x10,
    
16. 0x00,0x08,0xFE,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x3F,0x82,0x20,0x82,0x20,
    
17. 0x82,0x20,0x82,0x20,0x82,0x20,0x82,0x20,0x82,0x20,0x00,0x00,0x00,0x00,0x00,0x00,
    
18. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*LOVE*/
    
19. };
    
20. 
    
21. 
    
22. uchar code loveyou[] = {
    
23. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    
24. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    
25. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    
26. 0x78,0x00,0xFC,0x00,0xFE,0x01,0xFE,0x03,0xFE,0x07,0xFE,0x0F,0xFE,0x1F,0xFC,0x3F,
    
27. 0xF8,0x7F,0xFC,0x3F,0xFE,0x1F,0xFE,0x0F,0xFE,0x07,0xFE,0x03,0xFE,0x01,0xFC,0x00,
    
28. 0x78,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    
29. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    
30. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*心形图案*/
    
31. };
    
32. 
    
33. uchar code hehe[] = {
    
34. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    
35. 0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x01,0x40,0x01,0xC0,0x01,0x00,0x00,0x00,0x00,
    
36. 0xF0,0x0F,0x08,0x10,0x04,0x20,0x00,0x00,0x00,0x00,0xF0,0x3F,0x08,0x00,0x04,0x00,
    
37. 0x04,0x00,0x04,0x00,0x08,0x00,0xF0,0x3F,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x20,
    
38. 0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,0xF0,0x3F,0x08,0x00,0x04,0x00,
    
39. 0x04,0x00,0x04,0x00,0x08,0x00,0xF0,0x3F,0x00,0x00,0x00,0x00,0x04,0x20,0x08,0x10,
    
40. 0xF0,0x0F,0x00,0x00,0x00,0x00,0xC0,0x01,0x40,0x01,0xC0,0x01,0x00,0x00,0x00,0x00,
    
41. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*呵呵o(∩_∩)o图案*/
    
42. };
    
43. 
    
44. unsigned char code hanzi[] = {
    
45. //-- 欢 --
    
46.       0x04,0x10,0x34,0x08,0xC4,0x06,0x04,0x01,
    
47.       0xC4,0x82,0x3C,0x8C,0x20,0x40,0x10,0x30,
    
48.       0x0F,0x0C,0xE8,0x03,0x08,0x0C,0x08,0x10,
    
49.       0x28,0x60,0x18,0xC0,0x00,0x40,0x00,0x00,
    
50. //-- 迎 --
    
51.       0x40,0x00,0x42,0x40,0x44,0x20,0xC8,0x1F,
    
52.       0x00,0x20,0xFC,0x47,0x04,0x42,0x02,0x41,
    
53.       0x82,0x40,0xFC,0x7F,0x04,0x40,0x04,0x42,
    
54.       0x04,0x44,0xFE,0x63,0x04,0x20,0x00,0x00,
    
55. //-- 使 --
    
56.       0x40,0x00,0x20,0x00,0xF8,0xFF,0x07,0x00,
    
57.       0x04,0x80,0xF4,0x43,0x14,0x45,0x14,0x29,
    
58.       0x14,0x19,0xFF,0x17,0x14,0x21,0x14,0x21,
    
59.       0x14,0x41,0xF6,0xC3,0x04,0x40,0x00,0x00,
    
60. //-- 用 --
    
61.       0x00,0x80,0x00,0x60,0xFE,0x1F,0x22,0x02,
    
62.       0x22,0x02,0x22,0x02,0x22,0x02,0xFE,0x7F,
    
63.       0x22,0x02,0x22,0x02,0x22,0x42,0x22,0x82,
    
64.       0xFF,0x7F,0x02,0x00,0x00,0x00,0x00,0x00,
    
65. 
    
66. 
    
67. };
    
68. 
    
69. /*****函数声明*****/
    
70. void display1_ltor(void);
    
71. void display2_ltor(void);
    
72. void display2_rtol(void);
    
73. void display3(void);
    
74. void display4(void);
    
75. 
    
76. 
    
77. 
    
78. 
    
79. 
    
80. 
    
81. /*****n（us）延时子程序*****/
    
82. void DelayUs(uint N)
    
83. {
    
84. uint x;
    
85. for(x=0; x<=N;x++);
    
86. }
    
87. 
    
88. /*****中断服务程序*****/
    
89. void intersvr0(void) interrupt 0
    
90. {
    
91. ;
    
92. KY=~KY;      //每个摇动来回水银开关会在摆幅两端分别产生下降沿中断，只提取其中一次（从左向右摇才显示）
    
93. if(KY==0)
    
94. {
    
95.    num++;     //计算中断次数
    
96.    switch(pic)      //选择画面
    
97.    {
    
98.         case 0:{display1_ltor();}break;
    
99.     case 1:{display2_ltor();}break;
    
100.     case 2:{display3();}break;
     
101.     case 3:{display4();}break;
     
102.     default:{display1_ltor();}  
     
103.    }
     
104. }
     
105. 
     
106. }
     
107. /*****显示子程序1（汉字）*****/
     
108. void display1_ltor(void)
     
109. {
     
110. uchar i;
     
111. if(num>10){disp++;num=0;}     //12个汉字分为3次显示完（每次显示4个），每中断10次切换
     
112. if(disp>2)disp=0;
     
113.   DelayUs(5200);     //此处延时时间依各硬件差别而各不相同，试着调整使得显示内容居中即可
     
114. for(i=0;i<64;i++)
     
115. {
     
116.      P0=~hanzi[disp*128+i*2];
     
117.      P2=~hanzi[disp*128+i*2+1];
     
118.      DelayUs(100);
     
119. }
     
120. }
     
121. 
     
122. /*****显示子程序2（LOVE）*****/
     
123. void display2_ltor(void)
     
124. {
     
125. uchar i;
     
126. DelayUs(4000);
     
127. for(i=0;i<64;i++)
     
128. {
     
129.      P0=~love[i*2];
     
130.      P2=~love[i*2+1];
     
131.      DelayUs(140);
     
132. }
     
133. }
     
134. /*****显示子程序3（心形图案）*****/
     
135. void display3(void)
     
136. {
     
137. uchar i;
     
138.   DelayUs(4000);
     
139. for(i=0;i<64;i++)
     
140. {
     
141.      P0=~loveyou[i*2];
     
142.      P2=~loveyou[i*2+1];
     
143.      DelayUs(120);
     
144. }
     
145. }
     
146. 
     
147. /*****显示子程序4（呵呵o(∩_∩)o图案）*****/
     
148. void display4(void)
     
149. {
     
150. uchar i;
     
151. DelayUs(4000);
     
152. for(i=0;i<64;i++)
     
153. {
     
154.      P0=~hehe[i*2];
     
155.      P2=~hehe[i*2+1];
     
156.      DelayUs(120);
     
157. }
     
158. }
     
159. 
     
160. /*****主函数*****/
     
161. void main(void)
     
162. {
     
163. IT0=1;
     
164. EX0=1;
     
165. EA=1;      //开中断，下降沿中断
     
166. KY=0;
     
167. KEY=1;
     
168. while(1)     //主程序中只检测按键
     
169. {
     
170.   if(KEY==0)     //画面切换键按下
     
171.   {
     
172.      DelayUs(10000);     //按键去抖
     
173.      if(KEY==0);
     
174.      pic++;
     
175.      while(KEY==0);
     
176.   }
     
177.   if(pic>3)pic=0;
     
178. }
     
179. }
     
180. /*****END*****/

复制代码

全部资料51hei下载地址：
摇摇棒配套资料.zip (2.04 MB, 下载次数: 85)

2019-5-28 22:57 上传

点击文件名下载附件
下载积分: 黑币 -5

---

作者: 丢丢的猫    时间: 2019-7-26 11:28
元件清单在哪啊？

---

作者: linnyshow    时间: 2019-8-8 09:39
很好。。。。

---

作者: dugunanahai    时间: 2021-2-2 21:26
我怎么摇不出这个效果，只亮边上一排

---

作者: s290257552    时间: 2021-9-13 15:31
看着不错，有用吗？

---

作者: uvwxay    时间: 2022-1-28 19:47
做个试试，这个是有遥的速度要求吧

---

欢迎光临 (http://www.51hei.com/bbs/)

Powered by Discuz! X3.1