51单片机模拟电梯电路原理图+代码 -

标题: 51单片机模拟电梯电路原理图+代码 [打印本页]

作者: 夏末。 时间: 2019-6-20 11:08
标题: 51单片机模拟电梯电路原理图+代码

程序如下
#include <reg51.h>
#include <stdio.h>
#define uint unsigned int
#define uchar unsigned char

sbit fmq=P1^7;

sbit  led1=P2^7;
sbit  led2=P2^6;
sbit  led3=P2^5;
sbit  led4=P2^4;
sbit  led5=P2^3;
sbit  led6=P2^2;

sbit le1=P2^0;
sbit le2=P2^1;

sbit k1=P3^0;
sbit k2=P3^1;
sbit k3=P3^2;
sbit k4=P3^3;
sbit k5=P3^4;
sbit k6=P3^5;

uchar code a[]={
/*--  文字:  9  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16 --*/
0x00,0x00,0x00,0x7E,0x42,0x42,0x42,0x42,0x7E,0x40,0x40,0x40,0x40,0x40,0x40,0x7E,

/*--  文字:  8  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16 --*/
0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x24,0x18,0x24,0x42,0x42,0x42,0x3C,0x00,0x00,

/*--  文字:  7  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16 --*/
0x00,0x00,0x00,0x7E,0x42,0x20,0x20,0x10,0x10,0x08,0x08,0x08,0x08,0x08,0x00,0x00,

/*--  文字:  6  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16 --*/
0x00,0x00,0x00,0x18,0x24,0x02,0x02,0x3A,0x46,0x42,0x42,0x42,0x44,0x38,0x00,0x00,

/*--  文字:  5  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16 --*/
0x00,0x00,0x00,0x7E,0x02,0x02,0x02,0x1E,0x22,0x40,0x40,0x42,0x22,0x1C,0x00,0x00,

/*--  文字:  4  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16 --*/
0x00,0x00,0x00,0x20,0x30,0x30,0x28,0x24,0x24,0x22,0xFE,0x20,0x20,0xF8,0x00,0x00,

/*--  文字:  3  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16 --*/
0x00,0x00,0x00,0x3C,0x42,0x42,0x40,0x20,0x18,0x20,0x40,0x42,0x42,0x3C,0x00,0x00,

/*--  文字:  2  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16 --*/
0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x40,0x20,0x10,0x08,0x04,0x42,0x7E,0x00,0x00,

/*--  文字:  1  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16 --*/
0x00,0x00,0x00,0x10,0x1C,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00,

};

uchar code shang[]={

      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,
      0x00,0x00,0x00,0x08,0x1C,0x2A,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,


      };

uchar code xia[]={
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
      0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x49,0x2A,0x1C,0x08,0x00,
                     };

uchar code hz[]={
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  中  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0xFC,0x1F,0x84,0x10,0x84,0x10,0x84,0x10,
0x84,0x10,0x84,0x10,0xFC,0x1F,0x84,0x10,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,

/*--  文字:  北  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x20,0x02,0x20,0x02,0x20,0x02,0x20,0x22,0x20,0x12,0x3E,0x0A,0x20,0x06,0x20,0x02,
0x20,0x02,0x20,0x02,0x20,0x02,0x20,0x42,0x38,0x42,0x27,0x42,0x22,0x7C,0x20,0x00,

/*--  文字:  大  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0xFF,0x7F,0x80,0x00,0x80,0x00,
0x40,0x01,0x40,0x01,0x20,0x02,0x20,0x02,0x10,0x04,0x08,0x08,0x04,0x10,0x03,0x60,

/*--  文字:  学  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x44,0x10,0x88,0x10,0x88,0x08,0x00,0x04,0xFE,0x7F,0x02,0x40,0x01,0x20,0xF8,0x07,
0x00,0x02,0x80,0x01,0xFF,0x7F,0x80,0x00,0x80,0x00,0x80,0x00,0xA0,0x00,0x40,0x00,

/*--  文字:  欢  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x01,0x00,0x01,0x3F,0x01,0x20,0x3F,0xA0,0x20,0x92,0x10,0x54,0x02,0x28,0x02,
0x08,0x02,0x14,0x05,0x24,0x05,0xA2,0x08,0x81,0x08,0x40,0x10,0x20,0x20,0x10,0x40,

/*--  文字:  迎  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x00,0x00,0x04,0x01,0xC8,0x3C,0x48,0x24,0x40,0x24,0x40,0x24,0x4F,0x24,0x48,0x24,
0x48,0x24,0x48,0x2D,0xC8,0x14,0x48,0x04,0x08,0x04,0x14,0x04,0xE2,0x7F,0x00,0x00,

/*--  文字:  您  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16 --*/
0x90,0x00,0x90,0x00,0x88,0x3F,0x4C,0x20,0x2A,0x12,0x99,0x0A,0x88,0x12,0x48,0x22,
0x28,0x22,0x88,0x02,0x08,0x01,0x40,0x00,0x8A,0x20,0x8A,0x48,0x09,0x48,0xF0,0x0F,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00

                     };

uchar s,s1,s2,s3,s4,s5,s6,fla,num,fla1,fla2,fla3,s88;

uchar l1,l2,l3,l4,l5,l6;

  uchar j,k;
void delay(uint x)
{
uchar i,k;
for(i=0;i<110;i++)
   for(k=0;k<x;k++);
}

void initt0()
{
      EA=1;
      ET0=1;
      TMOD=0x01;
      TH0=(65535-50000)/256;
      TL0=(65535-50000)%256;
      TR0=1;
}

uchar key(void)
{
      uchar k;

      if(k1==0)
      {
            delay(2);
            if(k1==0)
            {
                     k=1;
                     while(k1==0);
            }

      }

      if(k2==0)
      {
            delay(2);
            if(k2==0)
            {
                     k=2;
                     while(k2==0);
            }

      }

if(k3==0)
      {
            delay(2);
            if(k3==0)
            {
                     k=3;
                     while(k3==0);
            }

      }

      if(k4==0)
      {
            delay(2);
            if(k4==0)
            {
                     k=4;
                     while(k4==0);
            }

      }

if(k5==0)
      {
            delay(2);
            if(k5==0)
            {
                     k=5;
                     while(k5==0);
            }

      }

      if(k6==0)
      {
            delay(2);
            if(k6==0)
            {
                     k=6;
                     while(k6==0);
            }

      }

return k;
}

void main(void)
{
uchar t,b;
      initt0();
      s1=128;
      num=128;
      s2=48;
   while (1)
   {
            b=key();
                     switch(b)
                     {

                              case 1: num=128; break;//1

                              case 2: num=112; break;//2上

                              case 3: num=96;  break;//3上

                              case 4: num=80; break;//4上

                              case 5: num=64; break;//5上

                              case 6: num=48; break;//6


                     }
                     switch(s1)
                     {
                              case 128 :led1=0;led2=1;led3=1;led4=1;led5=1;led6=1; s88=8; break;
                              case 112:  led1=1;led2=0;led3=1;led4=1;led5=1;led6=1;s88=7;  break;
                              case 96:  led1=1;led2=1;led3=0;led4=1;led5=1;led6=1;s88=6; break;
                              case 80:  led1=1;led2=1;led3=1;led4=0;led5=1;led6=1;s88=5; break;
                              case 64: led1=1;led2=1;led3=1;led4=1;led5=0;led6=1;s88=4; break;
                              case 48:  led1=1;led2=1;led3=1;led4=1;led5=1;led6=0;s88=3; break;
                     }

            if(fla2==0)
            {
         for(t=0;t<16;t++)
         {
                     P0=a[t+s88*16];
                     le2=1;
                     le2=0;
            if(fla==1)
            {
            P0=shang[t+s2];
            le1=1;
            le1=0;
            }
            if(fla==2)
            {
            P0=xia[t+s2];
            le1=1;
            le1=0;
            }
            P1=t;
            delay(1);

            P0=0x00;
            le2=1;
         le1=1;
            le2=0;
         le1=0;
         }
            }
            else if(fla2==1)
            {
               for(t=0;t<16;t++)
            {
                     P0=hz[t*2+s6*2];
                     le1=1;
                     le1=0;

                     P0=hz[t*2+1+s6*2];
                     le2=1;
                     le2=0;

                     P1=t;
                     delay(1);

                     P0=0x00;
                     le2=1;
                     le1=1;
                     le2=0;
                     le1=0;
            }
            }
      }
}

void t0() interrupt 1
{
      TH0=(65535-50000)/256;
      TL0=(65535-50000)%256;
      s++;
      if(fla3==1)
      {
            k=0;
      }

      if(num==s1&&num!=128)
      {
            s3++;
            if(s3==200)
            {
                     fla3=1;
            }
      }
      else
            {
            s3=0;
            fla3=0;
            }

      if(s1==128)
      {
            s4++;
            if(s4==30)
            {
                     fla2=1;
            }
      }
      else
      {
            s4=0;
            fla2=0;
      }
      if(fla2==1)
      {
            s5++;
            if(s5==1)
            {
                     s5=0;
                     s6++;
                     if(s6==128)
                     s6=0;
            }
      }
      else
      s6=0;
      if(s==2)
      {

               s=0;
               fla=0;
            if(s1<num)
            {
                     fla=2;
                     s1++;
                     s2--;
            }

            if(s1>num)
            {
                     fla=1;
                     s1--;
                     s2++;
            }
      }
}

全部资料51hei下载地址：

模拟电梯原理图.7z (29.02 KB, 下载次数: 28)

欢迎光临 (http://www.51hei.com/bbs/)