esp8266成功接入机智云平台控制led 附源程序 -

#include "ets_sys.h"
#include "osapi.h"
#include "user_interface.h"
#include "gagent_soc.h"
#include "user_devicefind.h"
#include "user_webserver.h"
#include "gizwits_product.h"
#include "driver/hal_key.h"
#if ESP_PLATFORM
#include "user_esp_platform.h"
#endif
#include "driver/hal_temp_hum.h"
#ifdef SERVER_SSL_ENABLE
#include "ssl/cert.h"
#include "ssl/private_key.h"
#else
#ifdef CLIENT_SSL_ENABLE
unsigned char *default_certificate;
unsigned int default_certificate_len = 0;
unsigned char *default_private_key;
unsigned int default_private_key_len = 0;
#endif
#endif
/**@} */
/**@name Key related definitions
* @{
*/
#define GPIO_KEY_NUM 4 ///< Defines the total number of key members
#define KEY_0_IO_MUX PERIPHS_IO_MUX_GPIO0_U ///< ESP8266 GPIO function
#define KEY_0_IO_NUM 0 ///< ESP8266 GPIO number
#define KEY_0_IO_FUNC FUNC_GPIO0 ///< ESP8266 GPIO name
#define KEY_1_IO_MUX PERIPHS_IO_MUX_GPIO2_U ///< ESP8266 GPIO function
#define KEY_1_IO_NUM 2 ///< ESP8266 GPIO number
#define KEY_1_IO_FUNC FUNC_GPIO2 ///< ESP8266 GPIO name
#define KEY_2_IO_MUX PERIPHS_IO_MUX_U0RXD_U ///< ESP8266 GPIO function
#define KEY_2_IO_NUM 3 ///< ESP8266 GPIO number
#define KEY_2_IO_FUNC FUNC_GPIO3 ///< ESP8266 GPIO name
#define KEY_3_IO_MUX PERIPHS_IO_MUX_U0TXD_U ///< ESP8266 GPIO function
#define KEY_3_IO_NUM 1 ///< ESP8266 GPIO number
#define KEY_3_IO_FUNC FUNC_GPIO1 ///< ESP8266 GPIO name
LOCAL key_typedef_t * singleKey[GPIO_KEY_NUM]; ///< Defines a single key member array pointer
LOCAL keys_typedef_t keys; ///< Defines the overall key module structure pointer
/**@} */
/**
* Key1 key short press processing
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key1ShortPress(void)
{
if(statu[0]=!statu[0])
GIZWITS_LOG("#### KEY1 short press ,LED_1 ON/OFF \n");
}
/**
* Key1 key presses a long press
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key1LongPress(void)
{
GIZWITS_LOG("#### key1 long press, SOFTAP MODE\n");
gizwitsSetMode(WIFI_SOFTAP_MODE);
}
/**
* Key2 key to short press processing
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key2ShortPress(void)
{
if(statu[1]=!statu[1])
GIZWITS_LOG("#### key2 short press, LED_2 ON/OFF \n");
}
/**
* Key2 button long press
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key2LongPress(void)
{
GIZWITS_LOG("#### key2 long press, AIRLINK MODE\n");
gizwitsSetMode(WIFI_AIRLINK_MODE);
}
/**
* Key3 key to short press processing
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key3ShortPress(void)
{
if(statu[2]=!statu[2])
GIZWITS_LOG("#### key3 short press, LED_3 ON/OFF \n");
}
/**
* Key3 button long press
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key3LongPress(void)
{
GIZWITS_LOG("#### key3 long press, ALL_LED ON \n");
}
/**
* Key4 key to short press processing
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key4ShortPress(void)
{
if(statu[3]=!statu[3])
GIZWITS_LOG("#### key4 short press, LED_4 ON/OFF \n");
}
/**
* Key4 button long press
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR key4LongPress(void)
{
GIZWITS_LOG("#### key4 long press, ALL_LED OFF \n");
}
/**
* Key to initialize
* @param none
* @return none
*/
LOCAL void ICACHE_FLASH_ATTR keyInit(void)
{
singleKey[0] = keyInitOne(KEY_0_IO_NUM, KEY_0_IO_MUX, KEY_0_IO_FUNC,
key1LongPress, key1ShortPress);
singleKey[1] = keyInitOne(KEY_1_IO_NUM, KEY_1_IO_MUX, KEY_1_IO_FUNC,
key2LongPress, key2ShortPress);
singleKey[2] = keyInitOne(KEY_2_IO_NUM, KEY_2_IO_MUX, KEY_2_IO_FUNC,
key3LongPress, key3ShortPress);
singleKey[3] = keyInitOne(KEY_3_IO_NUM, KEY_3_IO_MUX, KEY_3_IO_FUNC,
key4LongPress, key4ShortPress);
keys.singleKey = singleKey;
keyParaInit(&keys);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTMS_U,FUNC_GPIO14);// 配置lED_1引脚输出
GPIO_DIS_OUTPUT(GPIO_ID_PIN(14));
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDI_U,FUNC_GPIO12);// 配置LED_2引脚输出
GPIO_DIS_OUTPUT(GPIO_ID_PIN(12));
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U,FUNC_GPIO13);// 配置lED_1引脚输出
GPIO_DIS_OUTPUT(GPIO_ID_PIN(13));
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U,FUNC_GPIO15);// 配置lED_1引脚输出
GPIO_DIS_OUTPUT(GPIO_ID_PIN(15));
GPIO_OUTPUT_SET(GPIO_ID_PIN(14), 0);//输出高电平 LED_1 OFF
GPIO_OUTPUT_SET(GPIO_ID_PIN(12), 0);//输出高电平 LED_2 OFF
GPIO_OUTPUT_SET(GPIO_ID_PIN(13), 0);//输出高电平 LED_3 OFF
GPIO_OUTPUT_SET(GPIO_ID_PIN(15), 0);//输出高电平 LED_4 OFF
}
/**
* @brief user_rf_cal_sector_set
* Use the 636 sector (2544k ~ 2548k) in flash to store the RF_CAL parameter
* @param none
* @return none
*/
uint32_t ICACHE_FLASH_ATTR user_rf_cal_sector_set()
{
return 636;
}
/**
* @brief program entry function
* In the function to complete the user-related initialization
* @param none
* @return none
*/
void ICACHE_FLASH_ATTR user_init(void)
{
uint32_t system_free_size = 0;
wifi_station_set_auto_connect(1);
wifi_set_sleep_type(NONE_SLEEP_T);//set none sleep mode
espconn_tcp_set_max_con(10);
uart_init_3(9600,115200);
UART_SetPrintPort(1);
GIZWITS_LOG( "---------------SDK version:%s--------------\n", system_get_sdk_version());
GIZWITS_LOG( "system_get_free_heap_size=%d\n",system_get_free_heap_size());
struct rst_info *rtc_info = system_get_rst_info();
GIZWITS_LOG( "reset reason: %x\n", rtc_info->reason);
if (rtc_info->reason == REASON_WDT_RST ||
rtc_info->reason == REASON_EXCEPTION_RST ||
rtc_info->reason == REASON_SOFT_WDT_RST)
{
if (rtc_info->reason == REASON_EXCEPTION_RST)
{
GIZWITS_LOG("Fatal exception (%d):\n", rtc_info->exccause);
}
GIZWITS_LOG( "epc1=0x%08x, epc2=0x%08x, epc3=0x%08x, excvaddr=0x%08x, depc=0x%08x\n",
rtc_info->epc1, rtc_info->epc2, rtc_info->epc3, rtc_info->excvaddr, rtc_info->depc);
}
if (system_upgrade_userbin_check() == UPGRADE_FW_BIN1)
{
GIZWITS_LOG( "---UPGRADE_FW_BIN1---\n");
}
else if (system_upgrade_userbin_check() == UPGRADE_FW_BIN2)
{
GIZWITS_LOG( "---UPGRADE_FW_BIN2---\n");
}
keyInit();
gizwitsInit();
dh11Init();
GIZWITS_LOG("--- system_free_size = %d ---\n", system_get_free_heap_size());
}

复制代码