基于STM32单片机远程浇花花盆GSM短信浇水补光设计 -

标题: 基于STM32单片机远程浇花花盆GSM短信浇水补光设计 [打印本页]

作者: 高立强19920127 时间: 2019-8-22 14:58
标题: 基于STM32单片机远程浇花花盆GSM短信浇水补光设计
大家好：
今天我制作了基于STM32单片机远程浇花花盆GSM短信浇水补光设计

实物照片：

电路图及PCB板：

部分源程序：

/**
  ******************************************************************************
  * @file misc.h
  * @author  MCD Application Team
  * @version V3.5.0
  * @date 11-March-2011
  * @brief This file contains all the functions prototypes for the miscellaneous
  *       firmware library functions (add-on to CMSIS functions).
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MISC_H
#define __MISC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
  * @{
  */
/** @addtogroup MISC
  * @{
  */
/** @defgroup MISC_Exported_Types
  * @{
  */
/**
  * @brief  NVIC Init Structure definition
  */
typedef struct
{
  uint8_t NVIC_IRQChannel;                   /*!< Specifies the IRQ channel to be enabled or disabled.
                                                This parameter can be a value of @ref IRQn_Type
                                                (For the complete STM32 Devices IRQ Channels list, please
                                                refer to stm32f10x.h file) */
  uint8_t NVIC_IRQChannelPreemptionPriority;  /*!< Specifies the pre-emption priority for the IRQ channel
                                                specified in NVIC_IRQChannel. This parameter can be a value
                                                between 0 and 15 as described in the table @ref NVIC_Priority_Table */
  uint8_t NVIC_IRQChannelSubPriority;       /*!< Specifies the subpriority level for the IRQ channel specified
                                                in NVIC_IRQChannel. This parameter can be a value
                                                between 0 and 15 as described in the table @ref NVIC_Priority_Table */
  FunctionalState NVIC_IRQChannelCmd;       /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
                                                will be enabled or disabled.
                                                This parameter can be set either to ENABLE or DISABLE */
} NVIC_InitTypeDef;

/**
  * @}
  */
/** @defgroup NVIC_Priority_Table
  * @{
  */
/**
@code
The table below gives the allowed values of the pre-emption priority and subpriority according
to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
  ============================================================================================================================
NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority  | Description
  ============================================================================================================================
NVIC_PriorityGroup_0  |             0                |          0-15          | 0 bits for pre-emption priority
                     |                                  |                            | 4 bits for subpriority
  ----------------------------------------------------------------------------------------------------------------------------
NVIC_PriorityGroup_1  |             0-1             |          0-7             | 1 bits for pre-emption priority
                     |                                  |                            | 3 bits for subpriority
  ----------------------------------------------------------------------------------------------------------------------------
NVIC_PriorityGroup_2  |             0-3             |          0-3             | 2 bits for pre-emption priority
                     |                                  |                            | 2 bits for subpriority
  ----------------------------------------------------------------------------------------------------------------------------
NVIC_PriorityGroup_3  |             0-7             |          0-1             | 3 bits for pre-emption priority
                     |                                  |                            | 1 bits for subpriority
  ----------------------------------------------------------------------------------------------------------------------------
NVIC_PriorityGroup_4  |             0-15             |          0             | 4 bits for pre-emption priority
                     |                                  |                            | 0 bits for subpriority
  ============================================================================================================================
@endcode
*/
/**
  * @}
  */
/** @defgroup MISC_Exported_Constants
  * @{
  */
/** @defgroup Vector_Table_Base
  * @{
  */
#define NVIC_VectTab_RAM          ((uint32_t)0x20000000)
#define NVIC_VectTab_FLASH          ((uint32_t)0x08000000)
#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
                              ((VECTTAB) == NVIC_VectTab_FLASH))
/**
  * @}
  */
/** @defgroup System_Low_Power
  * @{
  */
#define NVIC_LP_SEVONPEND          ((uint8_t)0x10)
#define NVIC_LP_SLEEPDEEP          ((uint8_t)0x04)
#define NVIC_LP_SLEEPONEXIT       ((uint8_t)0x02)
#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
                     ((LP) == NVIC_LP_SLEEPDEEP) || \
                     ((LP) == NVIC_LP_SLEEPONEXIT))
/**
  * @}
  */
/** @defgroup Preemption_Priority_Group
  * @{
  */
#define NVIC_PriorityGroup_0       ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
                                                         4 bits for subpriority */
#define NVIC_PriorityGroup_1       ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
                                                         3 bits for subpriority */
#define NVIC_PriorityGroup_2       ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
                                                         2 bits for subpriority */
#define NVIC_PriorityGroup_3       ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
                                                         1 bits for subpriority */
#define NVIC_PriorityGroup_4       ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
                                                         0 bits for subpriority */
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
                                    ((GROUP) == NVIC_PriorityGroup_1) || \
                                    ((GROUP) == NVIC_PriorityGroup_2) || \
                                    ((GROUP) == NVIC_PriorityGroup_3) || \
                                    ((GROUP) == NVIC_PriorityGroup_4))
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10)
#define IS_NVIC_SUB_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10)
#define IS_NVIC_OFFSET(OFFSET)  ((OFFSET) < 0x000FFFFF)
/**
  * @}
  */
/** @defgroup SysTick_clock_source
  * @{
  */
#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB)
#define SysTick_CLKSource_HCLK       ((uint32_t)0x00000004)
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
                                    ((SOURCE) == SysTick_CLKSource_HCLK_Div8))
/**
  * @}
  */
/**
  * @}
  */
/** @defgroup MISC_Exported_Macros
  * @{
  */
/**
  * @}
  */
/** @defgroup MISC_Exported_Functions
  * @{
  */
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
#ifdef __cplusplus
}
#endif
#endif /* __MISC_H */
/**
  * @}
  */
/**
  * @}
  */
/**
  * @}
  */
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

第一次发帖子如有错误之处请多多指教、、
借鉴完了请给个赞和评论

作者: yyfffxixi 时间: 2019-8-24 10:58
多谢分享

作者: 机器人C603 时间: 2019-9-11 16:33
能把全部程序发一下嘛？

作者: 13118302007 时间: 2019-9-17 22:02
看不了

作者: 肥喵 时间: 2019-9-19 21:51
多谢分享

欢迎光临 (http://www.51hei.com/bbs/)