ws2811灯带stc11f60xe二十多种彩虹等模式变换程序 -

#include "main.h"
#include <STC/STC12C5A60S2.h>
#include <intrins.h> //因为要用到左右移函数，所以加入这个头文件
#include "caidengshu.h"
unsigned long WsDat[nWs];
//#define MAIN_Fosc 24000000L //定义主时钟
#define Black 0x000000 // 黑色
sbit LED=P0^0;
unsigned char q;
unsigned char h;
void WS_SET(unsigned long color,unsigned char num);//灯条开指定的灯
void WS_SET_Water_lamp(unsigned long color,unsigned int time);//流水灯不连接
void WS_SET_Water_lamp_two(unsigned long color,unsigned int time);//流水灯连接
void WS_SET_Water_lamp_two1(unsigned long color,unsigned int time);
void Breathing_lamp(unsigned long color,unsigned int time);//呼吸灯-仅支持三原色
void Breathing_lamp_Alternate(unsigned int time);//三色渐变交替
void yigedianliushui(unsigned long color,unsigned int time); //一个IC流水到左边
void WaterLampToCol2(unsigned long _uColor, unsigned int _uTime);
void WS_L_SetAll();
void WaterLampToCol3(unsigned long _uColor, unsigned int _uTime);
void WaterLampToCol12(unsigned long _uColor0,unsigned long _uColor1, unsigned int _uTime);
void WaterLampToCol11( unsigned int uTime);
void WaterLampToCol18( unsigned int uTime);
void qingling();
void WaterLampToCol11( unsigned int uTime);
void yigedianliushui10(unsigned int time);
void Delay1s() //@24.000MHz
{
unsigned char i, j;
_nop_();
_nop_();
i = 24;
j = 84;
do
{
while (--j);
} while (--i);
}
void Delay1ms() //@24.000MHz
{
unsigned char i, j;
_nop_();
_nop_();
i = 24;
j = 84;
do
{
while (--j);
} while (--i);
}
void delay_ms(unsigned int i)
{
while(i--)
{
Delay1ms();
}
}
void Delay20ms() //@24.000MHz
{
unsigned char i, j, k;
i = 2;
j = 211;
k = 231;
do
{
do
{
while (--k);
} while (--j);
} while (--i);
}
void main () //主函数
{
unsigned int x;
qingling();
P0M0=0X00;
P0M1=0X00;
// q=1;
// ColorToColor(0X000000,0XFF0000);
// ColorToColor(0XFF0000,0xFFFF00);
// ColorToColor(0xFFFF00,0Xffffff);
// ColorToColor(0Xffffff,0X00ffff);
// ColorToColor(0X00ffff,0X0000ff);
// ColorToColor(0X0000ff,0X000000);
// ColorToColor(0X000000,0X00FF00);
// ColorToColor(0X00FF00,0x0FFFF0);
// ColorToColor(0x0FFFF0,0Xffffff);
// ColorToColor(0Xffffff,0XFF00ff);
// ColorToColor(0XFF00ff,0XF0000f);
// ColorToColor(0XF0000f,0X000000);
while(1)
{
Breathing_lamp_Alternate(5);//三色渐变交替
delay_ms(1000);
x=3;
while(x--)
{
WaterLampToCol45(); //水滴向上升腾效果绿光
}
x=3;
while(x--)
{
WaterLampToCol46(); //水滴向上升腾效果红光
}
x=3;
while(x--)
{
WaterLampToCol47(); //水滴向上升腾效果蓝光
}
WaterLampToCol38(); //八灯一节，，七彩流水跑马效果
WaterLampToCol39(); //蓝光整段，，彩虹从左到右流过去真正彩虹效果
WaterLampToCol40(); //整段不发光，中间往两边流水，加两边向中间流水，循环三次
WaterLampToCol27(); //粉光里流水三个蓝光
delay_ms(200);
x=10;
while(x--) //七彩模式灯
{
WaterLampToCol19();
delay_ms(200);
WaterLampToCol20();
delay_ms(200);
WaterLampToCol21();
delay_ms(200);
WaterLampToCol22();
delay_ms(200);
WaterLampToCol23();
delay_ms(200);
WaterLampToCol25();
delay_ms(200);
WaterLampToCol25();
delay_ms(200);
WaterLampToCol26();
delay_ms(200);
}
WaterLampToCol34(); //整段不发光，中间往两边流水，加两边向中间流水，循环三次
x=3;
while(x--)
{
WaterLampToCol36(); //8个为一组的小段，，重点是变化的彩虹波浪
}
WaterLampToCol37(); // 每七段一节，红色流水，左右来回
WaterLampToCol41(); // 每八段一节，蓝色流水，左右来回
WaterLampToCol42(); // 每七段一节，蓝色流水，左右来回
WaterLampToCol43(); // 每七段一节，黄色流水，左右来回
WaterLampToCol44(); // 每七段一节，粉色流水，左右来回
x=3; //黄绿红交替变换闪烁
while(x--)
{
WaterLampToCol28();
}
x=3;
while(x--)
{
WaterLampToCol29();
}
x=3;
while(x--)
{
WaterLampToCol30();
}
WS_SET_Water_lamp_two(0x00ff00,100); //左边往右边黄光流水
WS_SET_Water_lamp_two1(0x00ff00,100); //右边往左边黄光流水
/* WaterLampToCol3(0x10ff50 ,100);
delay_ms(1000);
WaterLampToCol2(0x10ff50,100);
delay_ms(1000);
WS_SET_Water_lamp_two(0x10ff50,100);//流水灯连接
delay_ms(1000);
yigedianliushui(0x10ff50,100);
delay_ms(1000);
WS_SET_Water_lamp_two1(0x10ff50,100);//流水灯连接
delay_ms(1000);
Breathing_lamp(0x10ff50,100);
delay_ms(1000);
DisP_R_G_B(20);
delay_ms(1000); */
}
}
void yigedianliushui10(unsigned int time) //粉光里面黄光流水
{
unsigned char j,x,m;
unsigned long led,xishu,xishu1;
led=0x01;
xishu=1;
xishu1=0;
for(x=0;x<LED_N;x++)
{
for(j=12;j>0;j--)
{
led=_crol_(led,1);
for(m=0;m<8;m++)
{
xishu1=xishu*2;
xishu1=led/xishu;
if(xishu1==1)
{
DisP_Color(0x20ff50);
}
else
{
DisP_Color(0x20ff00);
}
}
}
reset();
delay_ms(time);
}
}
void delay(unsigned int time) //延时
{
unsigned int i,j,k;
for(j=0;j<time;j++)
for(i=0;i<time;i++)
for(k=0;k<time;k++)
Delay();
}
void Delay() //@24.000MHz
{
_nop_();
}
void reset(void)
{
int i;
LED=0;
for(i=0;i<50;i++)
{
Delay();
}
}
void T0(void)
{
LED=1;
LED=0;
Delay();
}
void T1(void)
{
LED=1;
Delay();
LED=0;
}
void qingling()
{
unsigned char i;
for(i=0;i<nWs;i++)
{
DisP_Color(WsDat[0x000000]);
}
reset();
}
void DisP_Color(unsigned long dat) //控制一个灯
{ unsigned int i;
for(i=0;i<24;i++)
{
if(0x800000 == (dat & 0x800000)) T1();
else T0();
dat<<=1; //左移一位
}
}
void DisP_ALLColor(unsigned long dat) //控制所有灯
{
int j;
for(j=0;j<LED_N;j++) DisP_Color(dat);
reset();
}
void DisP_R_G_B(unsigned int j) //RGB渐变
{
unsigned long i=0;
while(i<0xffffff)
{
if(i<0xff) DisP_ALLColor(i++);
else if(i<0xffff)
{
i=i+0x100;
DisP_ALLColor(i);
}
else if(i<0xffffff)
{i=i+0x10000;
DisP_ALLColor(i);
}
delay(j);
}
while(i>0)
{
if(i>0xffff00) DisP_ALLColor(i--);
else if(i>0xff0000) {i=i-0x100; DisP_ALLColor(i);}
else if(i>0) {i=i-0x10000;DisP_ALLColor(i);}
delay(j);
}
reset();
}
unsigned char abs0(int num)
{
if(num>0) return num;
num = -num;
return (unsigned char) num;
}
unsigned long ColorToColor(unsigned long color0, unsigned long color1)
{
unsigned char Red0, Green0, Blue0; // 起始三原色
unsigned char Red1, Green1, Blue1; // 结果三原色
int RedMinus, GreenMinus, BlueMinus; // 颜色差（color1 - color0）
unsigned char NStep; // 需要几步
float RedStep, GreenStep, BlueStep; // 各色步进值
unsigned long color; // 结果色
unsigned char i;
// 绿红蓝三原色分解
Red0 = color0>>8;
Green0 = color0>>16;
Blue0 = color0;
Red1 = color1>>8;
Green1 = color1>>16;
Blue1 = color1;
// 计算需要多少步（取差值的最大值）
RedMinus = Red1 - Red0;
GreenMinus = Green1 - Green0;
BlueMinus = Blue1 - Blue0;
NStep = ( abs0(RedMinus) > abs0(GreenMinus) ) ? abs0(RedMinus):abs0(GreenMinus);
NStep = ( NStep > abs0(BlueMinus) ) ? NStep:abs0(BlueMinus);
// 计算出各色步进值
RedStep = (float)RedMinus / NStep;
GreenStep = (float)GreenMinus / NStep;
BlueStep = (float)BlueMinus / NStep;
// 渐变开始
for(i=0; i<NStep; i++)
{
Red1 = Red0 + (char)(RedStep * i);
Green1 = Green0 + (char)(GreenStep * i);
Blue1 = Blue0 + (char)(BlueStep * i);
color = (((unsigned long)Green1<<16)&0XFF0000) | ((Red1<<8)&0XFF00) | Blue1&0XFF; // 合成绿红蓝
WsDat[i] = color;
DisP_ALLColor(color) ;
delay(15) ; // 渐变速度
}
return color;
}
void WS_SET(unsigned long color,unsigned char num) //
{
unsigned char j;
for(j=0;j<LED_N;j++)
{
if(j<num)
{
DisP_Color(color);
}
else
{
DisP_Color(Black);
}
}
reset();
}
void WS_SET_Water_lamp(unsigned long color,unsigned int time)
{
unsigned char j,x;
for(x=0;x<LED_N;x++)
{
for(j=0;j<LED_N;j++)
{
if(j==x)
{
DisP_Color(color);
}
else
{
DisP_Color(0x20ff00);
}
}
reset();
delay_ms(time);
}
}
void WS_SET_Water_lamp_two(unsigned long color,unsigned int time) //左边往右边流水
{
unsigned char j,x;
for(x=0;x<nWs;x++)
{
for(j=0;j<nWs;j++)
{
if(j<x)
{
DisP_Color(color);
}
else
{
DisP_Color(0x9f9f9f);
}
}
reset();
delay_ms(time);
}
}
void WS_SET_Water_lamp_two1(unsigned long color,unsigned int time) //右边往左边流水
{
unsigned char j,x;
for(x=0;x<nWs;x++)
{
for(j=nWs;j>0;j--)
{
if(j<x)
{
DisP_Color(color);
}
else
{
DisP_Color(0x9f9f9f);
}
}
reset();
delay_ms(time);
}
}
void yigedianliushui(unsigned long color,unsigned int time) //一个IC流水到左边
{
unsigned char j,x,m;
unsigned long led,xishu,xishu1;
led=0x01;
xishu=1;
xishu1=0;
for(x=0;x<LED_N;x++)
{
for(j=12;j>0;j--)
{
led=_crol_(led,1);
for(m=0;m<8;m++)
{
xishu1=xishu*2;
xishu1=led/xishu;
if(xishu1==1)
{
DisP_Color(color);
}
else
{
DisP_Color(0x9f9f9f);
}
}
}
reset();
delay_ms(time);
}
}
void Breathing_lamp(unsigned long color,unsigned int time)
{
unsigned char j,x,r,g,b,move;
unsigned long color0,color1;
r=color>>8;
g=color;
b=color>>16;
if(r!=0)
{
color0=r;move=8;
}
if(g!=0)
{
color0=g;move=0;
}
if(b!=0)
{
color0=b;move=16;
}
for(x=0;x<127;x++)
{
color1=color0<<move;
for(j=0;j<LED_N;j++)
{
DisP_Color(color1);
}
color0=color0-2;
reset();
delay_ms(time);
}
for(x=0;x<127;x++)
{
color1=color0<<move;
for(j=0;j<LED_N;j++)
{
DisP_Color(color1);
}
color0=color0+2;
reset();
delay_ms(time);
}
}
void Breathing_lamp_Alternate(unsigned int time)
{
unsigned char j,x,num,move;
unsigned long color0,color1;
for(num=0;num<3;num++)
{
color0=0;
move=8*num;
for(x=0;x<127;x++)
{
color1=color0<<move;
for(j=0;j<LED_N;j++)
{
DisP_Color(color1);
}
color0=color0+2;
reset();
delay_ms(time);
}
for(x=0;x<127;x++)
{
color1=color0<<move;
for(j=0;j<LED_N;j++)
{
DisP_Color(color1);
}
color0=color0-2;
reset();
delay_ms(time);
}
}
}
/*
*********************************************************************************************************
* 函数名: WaterLampToCol2
* 功能说明: 单组灯移位显示
* 形参：_uColor 点亮颜色
* _uTime 移位速度
* 返回值: 无
*********************************************************************************************************
*/
void WaterLampToCol2(unsigned long _uColor, unsigned int _uTime)
{
unsigned char i, j;
unsigned long Red2,Green2, Blue2; // 三原色
Red2 = _uColor>>8;
Green2 = _uColor>>16;
Blue2 = _uColor;
for (i = 0; i < nWs; i++)
{
for (j = 0; j < i; j++)
{
// Red2 = Red2 + 0x22;
//Green2 = Green2 + 0x22;
Blue2 = Blue2 + 0x22;
_uColor = Green2<<16 | Red2<<8 | Blue2;
// _uColor = _uColor + 0xfffff*i;
WsDat[j] = _uColor;
}
WS_L_SetAll();
delay_ms(_uTime);
// memset(WsDat, 0, sizeof(WsDat));
}
}
/*
*********************************************************************************************************
* 函数名: WaterLampToCol3
* 功能说明: 从中点向两端移动
* 形参：_uColor 点亮颜色
* _uTime 移位速度
* 返回值: 无
*********************************************************************************************************
*/
void WaterLampToCol3(unsigned long _uColor, unsigned int _uTime)
{
unsigned char i;
for (i = nWs/2; i < nWs; i++)
{
_uColor = _uColor + 0xfffff*i;
WsDat[i] = _uColor;
WsDat[nWs/2 -(i - nWs/2)] = _uColor;
WS_L_SetAll();
delay_ms(_uTime);
}
}
void WS_L_SetAll()
{
unsigned char j;
for (j=0; j<nWs; j++)
{
DisP_Color(WsDat[j]); // j 级联个数/ 0
}
reset();
}
/*
*********************************************************************************************************
* 函数名: WaterLampToCol12(可用)
* 功能说明: 从后向前移动（跳一个）
* 形参：_uColor 点亮颜色
* _uTime 移位速度
* 返回值: 无
*********************************************************************************************************
*/
void WaterLampToCol12(unsigned long _uColor0,unsigned long _uColor1, unsigned int _uTime)
……………………
…………限于本文篇幅余下代码请从51黑下载附件…………

复制代码