标题: 单片机16*16点阵汉字滚动显示程序+PCB文件 [打印本页]
作者: zyc123.    时间: 2019-12-29 13:26
标题: 单片机16*16点阵汉字滚动显示程序+PCB文件
Altium Designer画的原理图和PCB图如下：(51hei附件中可下载工程文件)


视频演示:https://dianliuegg.youku.com/sha ... d7117d654197dbfdb98

单片机源程序如下:
  1. #include <reg51.h>
  2. #define uchar unsigned char
  3. #define uint unsigned int


  6. sbit SRCLK=P2^0;//hang
  7. sbit RCLK=P2^1;
  8. sbit SER=P2^2;

  10. sbit SRCLK2=P0^0;//lie
  11. sbit RCLK2=P0^1;
  12. sbit SER2=P0^2;


  15. //字模格式 16x16  阴码，逐行，逆向，十六进制，C51格式

  17. uint code temp[]={

  19. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  20. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

  22. 0x48,0x08,0x48,0x08,0x48,0x08,0xF4,0x05,0x44,0x7C,0x46,0x22,0x46,0x24,0xF5,0x25,
  23. 0x14,0x25,0x14,0x15,0x14,0x15,0x14,0x09,0xF4,0x15,0x14,0x14,0x04,0x22,0x04,0x41,/*"做",0*/
  24. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  25.        
  26. 0x20,0x02,0x70,0x0A,0x1E,0x12,0x10,0x12,0x10,0x02,0xFF,0x7F,0x10,0x02,0x10,0x22,
  27. 0x50,0x22,0x30,0x12,0x18,0x0C,0x16,0x44,0x10,0x4A,0x10,0x51,0xD4,0x60,0x08,0x40,/*"我",1*/

  29. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  30.        
  31. 0x40,0x00,0x40,0x00,0x40,0x00,0x40,0x00,0x20,0x00,0xFF,0x7F,0x20,0x04,0x10,0x04,
  32. 0x10,0x04,0x08,0x02,0x18,0x02,0x60,0x01,0x80,0x01,0x60,0x06,0x18,0x08,0x06,0x10,/*"女",2*/

  34.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  35. 0x00,0x00,0x7C,0x3E,0x44,0x22,0x44,0x22,0x44,0x22,0x7C,0x3E,0x44,0x22,0x44,0x22,
  36. 0x44,0x22,0x7C,0x3E,0x44,0x22,0x44,0x22,0x44,0x22,0x42,0x21,0x52,0x29,0xA1,0x10,/*"朋",3*/

  38.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  39. 0x40,0x00,0x40,0x00,0x40,0x00,0xFF,0x7F,0x20,0x00,0x20,0x00,0xF0,0x0F,0x50,0x08,
  40. 0x48,0x08,0x88,0x04,0x84,0x02,0x02,0x01,0x81,0x02,0x60,0x04,0x18,0x18,0x06,0x60,/*"友",4*/

  42.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  43. 0x00,0x00,0xC0,0x1F,0x5E,0x12,0x52,0x12,0x52,0x12,0x52,0x12,0x52,0x12,0xD2,0x1F,
  44. 0x52,0x10,0x52,0x00,0x5E,0x00,0x52,0x40,0x40,0x40,0x40,0x40,0x80,0x7F,0x00,0x00,/*"吧",5*/

  46.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  47. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  48. 0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x00,0x0C,0x00,0x08,0x00,0x04,0x00,0x00,0x00,/*"，",6*/

  50.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  51. 0x10,0x00,0x90,0x3F,0x08,0x00,0x04,0x00,0x12,0x00,0x10,0x00,0xC8,0x7F,0x0C,0x04,
  52. 0x0A,0x04,0x09,0x04,0x08,0x04,0x08,0x04,0x08,0x04,0x08,0x04,0x08,0x05,0x08,0x02,/*"行",7*/

  54.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  55. 0x04,0x02,0x08,0x0A,0x7F,0x12,0x00,0x12,0x00,0x02,0xBE,0x7F,0x22,0x0A,0x22,0x0A,
  56. 0x22,0x0A,0x3E,0x0A,0x08,0x09,0x2A,0x09,0x49,0x49,0x88,0x48,0x8A,0x70,0x44,0x00,/*"就",8*/

  58.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  59. 0x10,0x00,0x90,0x3F,0x08,0x00,0x04,0x00,0x12,0x00,0x10,0x00,0xC8,0x7F,0x0C,0x04,
  60. 0x0A,0x04,0x09,0x04,0x08,0x04,0x08,0x04,0x08,0x04,0x08,0x04,0x08,0x05,0x08,0x02,/*"行",9*/

  62.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  63. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  64. 0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x00,0x0C,0x00,0x08,0x00,0x04,0x00,0x00,0x00,/*"，",10*/

  66.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  67. 0x00,0x00,0xFE,0x3F,0x00,0x01,0x00,0x01,0x80,0x00,0x80,0x00,0xC0,0x02,0xA0,0x04,
  68. 0x90,0x08,0x88,0x10,0x84,0x20,0x82,0x20,0x81,0x00,0x80,0x00,0x80,0x00,0x80,0x00,/*"不",11*/

  70.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  71. 0x10,0x00,0x90,0x3F,0x08,0x00,0x04,0x00,0x12,0x00,0x10,0x00,0xC8,0x7F,0x0C,0x04,
  72. 0x0A,0x04,0x09,0x04,0x08,0x04,0x08,0x04,0x08,0x04,0x08,0x04,0x08,0x05,0x08,0x02,/*"行",12*/

  74.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  75. 0x20,0x02,0x70,0x0A,0x1E,0x12,0x10,0x12,0x10,0x02,0xFF,0x7F,0x10,0x02,0x10,0x22,
  76. 0x50,0x22,0x30,0x12,0x18,0x0C,0x16,0x44,0x10,0x4A,0x10,0x51,0xD4,0x60,0x08,0x40,/*"我",13*/

  78.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  79. 0x00,0x00,0xFF,0x7F,0x80,0x00,0x80,0x00,0xFC,0x1F,0x84,0x10,0x84,0x10,0xFC,0x1F,
  80. 0x84,0x10,0x84,0x10,0xFF,0x7F,0x04,0x10,0x04,0x10,0x04,0x10,0x04,0x14,0x04,0x08,/*"再",14*/

  82.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  83. 0x10,0x00,0x10,0x1F,0x10,0x11,0x7E,0x11,0x10,0x1F,0x18,0x11,0x38,0x1F,0x54,0x11,
  84. 0x12,0x11,0x10,0x1F,0x80,0x00,0x10,0x21,0x12,0x49,0x12,0x48,0xE1,0x0F,0x00,0x00,/*"想",15*/

  86.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  87. 0x10,0x00,0x10,0x1F,0x10,0x11,0x7E,0x11,0x10,0x1F,0x18,0x11,0x38,0x1F,0x54,0x11,
  88. 0x12,0x11,0x10,0x1F,0x80,0x00,0x10,0x21,0x12,0x49,0x12,0x48,0xE1,0x0F,0x00,0x00,/*"想",16*/

  90.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  91. 0x40,0x00,0x40,0x00,0x40,0x00,0x40,0x00,0xFE,0x0F,0x40,0x08,0x40,0x08,0x48,0x18,
  92. 0x48,0x28,0x24,0x48,0x22,0x48,0x10,0x08,0x10,0x08,0x08,0x08,0x04,0x05,0x02,0x02,/*"办",17*/

  94.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  95. 0x00,0x02,0x04,0x02,0x08,0x02,0x08,0x02,0xE1,0x3F,0x02,0x02,0x02,0x02,0x08,0x02,
  96. 0xF8,0x7F,0x04,0x02,0x07,0x01,0x84,0x00,0x44,0x08,0x24,0x10,0xF4,0x3F,0x20,0x20,/*"法",18*/

  98.         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  99. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  100. 0x00,0x00,0x00,0x00,0x18,0x00,0x24,0x00,0x24,0x00,0x18,0x00,0x00,0x00,0x00,0x00,/*"。",19*/

  102. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  103. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00

  105. };



  109. uint code table1[]={
  110. 0xfffe,0xfffd,0xfffb,0xfff7,0xffef,0xffdf,0xffbf,0xff7f,
  111. 0xfeff,0xfdff,0xfbff,0xf7ff,0xefff,0xdfff,0xbfff,0x7fff};




  116. //void delay(uint a)
  117. //{
  118. //  uint i,j;
  119. //        for(i=a;i>0;i--)
  120. //        for(j=10;j>0;j--);
  121. //}

  123. void Hang_595(uint dat)//hang
  124. {
  125.         uint i=0;
  126.         RCLK=0;
  127.         for(i=0;i<16;i++)
  128.         {
  129.                 SER=dat&0x8000;
  130.                 dat<<=1;
  131.                 SRCLK=1;
  132.                 SRCLK=0;
  133.         }
  134.         RCLK=1;               
  135.         RCLK=0;
  136.         }


  139. void Line_595(uchar numL,uchar numH)//lie
  140. {
  141.         uint dat2=0X8001;
  142.   uint i=0;
  143.         RCLK2=0;
  144.        
  145.         dat2=numH;
  146.         dat2<<=8;
  147.         dat2|=numL;
  148.        
  149.         for(i=0;i<16;i++)
  150.         {
  151.                 SRCLK2=0;
  152.                 SER2=dat2&0x8000;
  153.                 dat2<<=1;       
  154.                 SRCLK2=1;
  155.                 SRCLK2=0;       
  156.         }
  157.         RCLK2=1;               
  158.         RCLK2=0;
  159. }


  162. ……………………

  164. …………限于本文篇幅 余下代码请从51黑下载附件…………
复制代码

所有资料51hei提供下载:
16x16点阵PCB文件.zip (18.35 MB, 下载次数: 107)
单片机程序.zip (25.49 KB, 下载次数: 102)

作者: 下一站.    时间: 2019-12-29 15:58
非常感谢。
作者: hfdgd    时间: 2020-1-10 16:13
想问一下，你的这个点阵是共阴还是共阳的
作者: 34岁老学生    时间: 2020-2-23 23:38
学习了，感谢分享
作者: hfdgd    时间: 2020-2-25 19:03
板子做了，程序下进去，出来不了效果，找不到原因
作者: hfdgd    时间: 2020-5-8 23:11
hfdgd 发表于 2020-2-25 19:03
板子做了，程序下进去，出来不了效果，找不到原因

找到原因了，是单片机的问题。板子和程序都是可以用的
作者: sun51    时间: 2020-5-9 11:56
感谢楼主共享资料
作者: zyc123.    时间: 2020-5-29 17:15
hfdgd 发表于 2020-1-10 16:13
想问一下，你的这个点阵是共阴还是共阳的

共阴的，3mm点阵
作者: 安静1429    时间: 2020-5-29 21:39
感谢分享
作者: zxule    时间: 2021-8-28 21:57
你好，如果我想实现左移应该改哪?谢谢！
作者: uvwxay    时间: 2022-1-28 19:53
做这个试试，我也想看看



欢迎光临 (http://www.51hei.com/bbs/) Powered by Discuz! X3.1