标题: oled编译出现错误，一直不知道怎么解决，想请问一下大家 [打印本页]
作者: callmesbplease    时间: 2020-1-26 21:24
标题: oled编译出现错误，一直不知道怎么解决，想请问一下大家
代码如下，是商家那边给我的例程，我想通过改例程来使用，但是我解决不了编译器报错问题，明明代码的位操作没有问题，就是无法编译


  1. //Drive_IC:SSD1306
  2. //=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  4. //#include <at89x51.h>
  5. #include <reg52.h>
  6. #include "intrins.h"



  10. #define Uchar unsigned char
  11. #define Uint  unsigned int
  12. #define Ulong unsigned long
  13. #define uchar unsigned char
  14. #define uint  unsigned int


  17. //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  18. //  Pin Definition
  19. //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



  23. //#define SCL3        P3^1                                // Serial Clock Input
  24. //#define SDA3        P3^2                                // Serial Data Input  
  25. sbit SCL3=P3^1;
  26. sbit SDA3=P3^2;

  28. code color13[]={
  29. /*------------------------------------------------------------------------------
  30. ;  源文件 / 文字 : C:\Documents and Settings\Administrator\桌面\新建文件夹 (2)\logo.bmp字模
  31. ;  宽×高（像素）: 128×64
  32. ------------------------------------------------------------------------------*/
  33. //0x80,0x40,0x10,//宽的像素数,高的像素数，宽的字节数，参数设置可选
  34. 0xFF,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  35. 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  36. 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  37. 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  38. 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  39. 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  40. 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  41. 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0xFF,
  42. 0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  43. 0x00,0x00,0x00,0x20,0x44,0x08,0x00,0x18,0x48,0x28,0xC8,0x08,0x28,0x48,0x18,0x00,
  44. 0x40,0x40,0xFC,0x40,0x40,0xFC,0x00,0x00,0xF8,0x00,0x00,0xFC,0x00,0x40,0x40,0xA0,
  45. 0x90,0x88,0x84,0x88,0x90,0x20,0x40,0x40,0x00,0x00,0x40,0x44,0xD8,0x20,0xF0,0xAC,
  46. 0xA8,0xE8,0xB8,0xA8,0xE0,0x00,0x00,0x00,0xC0,0x7C,0x54,0x54,0x54,0x54,0x54,0x54,
  47. 0x7C,0x40,0x40,0x00,0x00,0xF0,0x90,0x90,0x90,0xFC,0x90,0x90,0x90,0xF0,0x00,0x00,
  48. 0x00,0x80,0x88,0x88,0x88,0x88,0x88,0xE8,0xA8,0x98,0x8C,0x88,0x80,0x00,0x00,0x00,
  49. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
  50. 0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  51. 0x00,0x00,0x00,0x04,0x3E,0x01,0x10,0x11,0x09,0x05,0x3F,0x05,0x09,0x11,0x11,0x00,
  52. 0x08,0x18,0x0F,0x24,0x14,0x0F,0x00,0x00,0x0F,0x00,0x00,0x3F,0x00,0x20,0x22,0x2A,
  53. 0x32,0x22,0x3F,0x22,0x32,0x2A,0x22,0x20,0x00,0x00,0x20,0x10,0x0F,0x10,0x28,0x24,
  54. 0x23,0x20,0x2F,0x28,0x2A,0x2C,0x00,0x30,0x0F,0x04,0x3D,0x25,0x15,0x15,0x0D,0x15,
  55. 0x2D,0x24,0x24,0x00,0x00,0x07,0x04,0x04,0x04,0x1F,0x24,0x24,0x24,0x27,0x20,0x38,
  56. 0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  57. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
  58. 0xFF,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
  59. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
  60. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
  61. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
  62. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
  63. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
  64. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
  65. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0xFF,
  66. 0xFF,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  67. 0x01,0x01,0x01,0x81,0x41,0x21,0x21,0x61,0x01,0x01,0x21,0xE1,0xE1,0x01,0xE1,0xE1,
  68. 0x21,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x21,0xE1,0x21,0x21,0x21,0x61,0x01,0x01,
  69. 0x21,0x21,0xE1,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  70. 0x01,0x01,0x01,0x01,0x01,0x01,0xC1,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  71. 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  72. 0x01,0x01,0x01,0x21,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
  73. 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0xFF,
  74. 0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  75. 0x00,0x00,0x00,0x0F,0x10,0x20,0x24,0x1C,0x04,0x00,0x20,0x3F,0x01,0x3E,0x01,0x3F,
  76. 0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x22,0x22,0x27,0x30,0x00,0x00,
  77. 0x20,0x20,0x3F,0x20,0x20,0x00,0x00,0x1E,0x25,0x25,0x25,0x16,0x00,0x00,0x1E,0x21,
  78. 0x21,0x21,0x13,0x00,0x01,0x01,0x1F,0x21,0x21,0x00,0x00,0x00,0x21,0x3F,0x22,0x21,
  79. 0x01,0x00,0x00,0x1E,0x21,0x21,0x21,0x1E,0x00,0x21,0x3F,0x22,0x01,0x01,0x3E,0x20,
  80. 0x00,0x21,0x21,0x3F,0x20,0x20,0x00,0x00,0x1E,0x21,0x21,0x21,0x13,0x00,0x00,0x00,
  81. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
  82. 0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  83. 0x00,0x00,0x00,0xF0,0x08,0x04,0x04,0x04,0x0C,0x00,0xF0,0x08,0x04,0x04,0x08,0xF0,
  84. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x00,
  85. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0xFC,0x04,0x00,
  86. 0x00,0x00,0x00,0x00,0x0C,0x04,0xFC,0x04,0x0C,0x00,0x04,0xFC,0x04,0x04,0x08,0xF0,
  87. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  88. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  89. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
  90. 0xFF,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
  91. 0x80,0x80,0x80,0x81,0x82,0x84,0x84,0x84,0x82,0x80,0x81,0x82,0x84,0x84,0x82,0x81,
  92. 0x80,0x80,0x86,0x86,0x80,0x80,0x80,0x80,0x80,0x85,0x83,0x80,0x80,0x80,0x80,0x80,
  93. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x84,0x87,0x84,0x84,
  94. 0x84,0x86,0x80,0x80,0x80,0x84,0x87,0x84,0x80,0x80,0x84,0x87,0x84,0x84,0x82,0x81,
  95. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
  96. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
  97. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0xFF,
  98. };

  100. code color14[]={
  101. /*--  调入了一幅图像：F:\工作\8051\OLED1\abcd.bmp  --*/
  102. /*--  宽度x高度=128x64  --*/
  103. 0x00,0x00,0x00,0xF0,0x08,0x04,0x04,0x08,0xF0,0x00,0x04,0xFC,0x04,0x00,0x00,0x00,
  104. 0x00,0x04,0xFC,0x44,0x44,0xE4,0x0C,0x00,0x04,0xFC,0x04,0x04,0x08,0xF0,0x00,0xA8,
  105. 0xAE,0x98,0xFF,0xAC,0x8A,0x10,0xFC,0x0B,0x88,0x78,0x08,0x00,0x88,0x86,0x92,0x92,
  106. 0x92,0x92,0xD3,0xB2,0x92,0x82,0x8A,0x86,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  107. 0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x82,0xF2,0x92,0x97,0x92,0xFA,0x92,0x97,0xF2,
  108. 0x82,0x82,0x00,0x04,0x04,0x04,0x1C,0x64,0x85,0x06,0xC4,0x3C,0x04,0x04,0x04,0x00,
  109. 0x00,0x80,0x3E,0x2A,0xEA,0x2A,0x2A,0xEA,0x2A,0x3F,0x82,0x00,0x00,0x00,0x10,0x12,
  110. 0xD2,0x12,0x12,0xF2,0x12,0x52,0x93,0x1A,0x10,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,
  111. 0x00,0x00,0x00,0x01,0xC2,0x04,0xC4,0x02,0x81,0x40,0x44,0x47,0x84,0x04,0x04,0x06,
  112. 0x00,0x04,0x07,0x04,0x04,0x84,0xC6,0x00,0x04,0x07,0x84,0x44,0x42,0x41,0x80,0x08,
  113. 0x88,0x45,0x42,0x42,0x85,0x08,0x04,0x03,0x82,0xC4,0x08,0x00,0xC0,0x40,0x40,0x40,
  114. 0x40,0x08,0x8F,0x40,0x40,0xC0,0x00,0x00,0xC0,0x40,0x41,0xC2,0x46,0x00,0x80,0x40,
  115. 0x40,0x40,0x80,0x00,0x80,0x40,0x48,0x48,0x88,0x04,0x82,0x41,0x40,0x41,0x82,0x04,
  116. 0x08,0x08,0x00,0x08,0x08,0x08,0x44,0xC4,0x02,0x01,0x02,0x04,0x04,0x08,0x08,0x00,
  117. 0x08,0x08,0x09,0x0A,0x0F,0x48,0xC8,0x0F,0x0A,0x09,0xCC,0x08,0x00,0x04,0x42,0xC1,
  118. 0x40,0x40,0x88,0x0F,0x80,0x40,0x40,0x41,0xC6,0x00,0x40,0xC6,0x46,0x40,0x80,0x00,
  119. 0x00,0x00,0x09,0x3D,0x0B,0x3D,0x0B,0x09,0x03,0x34,0x24,0x24,0x1F,0x00,0x00,0x00,
  120. 0x21,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x31,0x28,0x24,0x22,0x21,0x00,
  121. 0x10,0x20,0x22,0x22,0x1D,0x00,0x04,0x0B,0x08,0x3F,0x28,0x00,0x13,0x22,0x22,0x22,
  122. 0x1C,0x00,0x1F,0x22,0x22,0x22,0x1C,0x00,0x00,0x00,0x3E,0x01,0x00,0x00,0x1D,0x22,
  123. 0x22,0x22,0x1D,0x00,0x03,0x34,0x24,0x24,0x1F,0x00,0x1F,0x20,0x20,0x20,0x1F,0x00,
  124. 0x00,0x14,0x2A,0x2A,0x3C,0x20,0x00,0x3F,0x22,0x22,0x1C,0x00,0x00,0x1C,0x22,0x22,
  125. 0x26,0x00,0x00,0x1C,0x22,0x22,0x3F,0x20,0x20,0x3E,0x09,0x0F,0x38,0x20,0x20,0x3F,
  126. 0x22,0x22,0x1D,0x00,0x1F,0x20,0x20,0x20,0x10,0x00,0x20,0x3F,0x20,0x20,0x1F,0x00,
  127. 0x00,0x00,0x88,0xE8,0x9E,0xC8,0xBE,0x88,0x00,0x00,0x00,0x04,0xFE,0x00,0x00,0x00,
  128. 0x00,0xFC,0x02,0x02,0x02,0xFC,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,
  129. 0x04,0xFE,0x00,0x00,0x00,0x00,0x0C,0x82,0x42,0x22,0x1C,0x00,0x00,0x04,0x02,0x12,
  130. 0x12,0xEC,0x00,0x40,0xB0,0x88,0x84,0xFE,0x00,0x00,0x00,0xBE,0x12,0x12,0x12,0xE2,
  131. 0x00,0x00,0xF8,0x24,0x12,0x12,0xE6,0x00,0x00,0x20,0x90,0x50,0x50,0xE0,0x00,0x02,
  132. 0xFE,0x10,0x10,0x10,0xE0,0x00,0x00,0xE0,0x10,0x10,0x10,0x30,0x00,0x00,0xE0,0x10,
  133. 0x10,0x12,0xFE,0x00,0x00,0x80,0x78,0x46,0x78,0x80,0x00,0x02,0xFE,0x12,0x12,0x12,
  134. 0xEC,0x00,0xF8,0x04,0x02,0x02,0x02,0x06,0x00,0x02,0xFE,0x02,0x02,0x04,0xF8,0x00,
  135. 0x40,0xC0,0x78,0x43,0xC0,0x7B,0x40,0x00,0x00,0x10,0x10,0xFA,0x03,0x02,0x00,0x00,
  136. 0x00,0x71,0x0A,0x0A,0x0A,0x89,0x70,0x00,0x00,0x03,0x03,0xC0,0xC0,0x00,0x00,0x00,
  137. 0x02,0x13,0x12,0xF8,0x00,0x00,0x03,0x02,0x02,0x72,0x0A,0x08,0x08,0x89,0x72,0x02,
  138. 0x02,0x31,0x08,0x88,0x88,0x48,0x32,0x03,0x02,0x00,0xC0,0x21,0x12,0xFA,0x02,0x01,
  139. 0x00,0xF8,0x09,0x8A,0x8A,0x0A,0x09,0x00,0x00,0xE1,0x12,0x8A,0x8A,0x1B,0x02,0x00,
  140. 0x03,0x02,0x82,0x82,0x81,0x80,0x00,0x01,0x0A,0xFA,0x02,0x81,0x80,0x00,0x01,0x02,
  141. 0x02,0x02,0x03,0x82,0x82,0x83,0x02,0x00,0x02,0x03,0xC2,0x3A,0xE3,0x02,0x02,0x02,
  142. 0x09,0xF8,0x88,0x89,0x8A,0x72,0x02,0x01,0xC0,0x32,0x0B,0x0A,0x0A,0x09,0x38,0x00,
  143. 0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,
  144. 0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,
  145. 0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,
  146. 0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,
  147. 0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,
  148. 0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,
  149. 0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,
  150. 0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,
  151. 0x10,0x90,0xFE,0x10,0x10,0x90,0xFE,0x10,0x00,0x00,0x00,0x04,0x04,0xFE,0x00,0x00,
  152. 0x00,0x00,0x00,0x00,0x00,0xC0,0x30,0x08,0x04,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,
  153. 0x00,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x04,0xFE,0x00,0x00,0x00,0x00,
  154. 0x00,0x00,0x1C,0x02,0x02,0x02,0x02,0xC2,0x3C,0x00,0x00,0x00,0x1C,0x02,0x42,0x42,
  155. 0x62,0x9C,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,0x40,0x40,0x80,0x00,0x00,0x00,
  156. 0x02,0xFE,0x80,0x40,0x40,0x40,0x80,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,0x80,
  157. 0x00,0x00,0x00,0x00,0x00,0x80,0x78,0x06,0x78,0x80,0x00,0x00,0x00,0x00,0x02,0xFE,
  158. 0x42,0x42,0x42,0x62,0x9C,0x00,0x00,0x00,0xF0,0x08,0x04,0x02,0x02,0x02,0x04,0x0E,
  159. 0x04,0x3F,0x04,0x04,0x04,0x3F,0x04,0x04,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,
  160. 0x00,0x00,0x00,0x00,0x03,0x02,0x02,0x22,0x22,0x3F,0x22,0x22,0x00,0x00,0x00,0x00,
  161. 0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,
  162. 0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x20,0x38,0x00,0x00,0x00,0x1C,0x20,0x20,0x20,
  163. 0x20,0x10,0x0F,0x00,0x00,0x00,0x19,0x24,0x24,0x22,0x22,0x22,0x3F,0x20,0x30,0x00,
  164. 0x00,0x3F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,0x00,0x0F,0x10,0x20,0x20,0x20,0x11,
  165. 0x08,0x00,0x00,0x20,0x38,0x27,0x02,0x02,0x02,0x27,0x38,0x20,0x00,0x00,0x20,0x3F,
  166. 0x20,0x20,0x20,0x20,0x10,0x0F,0x00,0x00,0x07,0x18,0x20,0x20,0x20,0x20,0x10,0x0C,
  167. };

  169. //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  171. void         delay_ms(Uint t)
  172. {
  173.         Uchar i,j;
  174.         while(--t)
  175.         {
  176.         i=50;       
  177.         j=100;

  179.                 while(--j)
  180.                         while(--i);
  181.         }
  182. }
  183. void uDelay(Uchar l)
  184. {
  185.         while(l--);
  186. }


  189. void Delay(Uchar n)
  190. {
  191. Uchar i,j,k;

  193.         for(k=0;k<n;k++)
  194.         {
  195.                 for(i=0;i<131;i++)
  196.                 {
  197.                         for(j=0;j<15;j++)
  198.                         {
  199.                                 uDelay(203);       
  200.                         }
  201.                 }
  202.         }
  203. }


  206. //****************************************************************************
  207. //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  208. //  Read/Write Sequence
  209. //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  210. void I2C_3(Uchar mcmd)
  211. {
  212. Uchar length = 8;                        // Send Command

  214.         while(length--)
  215.         {
  216.                 if(mcmd & 0x80)
  217.                 {
  218.                         SDA3=1;
  219.                 }
  220.                 else
  221.                 {
  222.                         SDA3=0;
  223.                 }
  224. //                uDelay(3);
  225.                 SCL3=1;
  226. //                uDelay(3);
  227.                 SCL3=0;
  228. //                uDelay(3);
  229.                 mcmd = mcmd << 1;
  230.         }
  231. }


  234. void I2C_Ack3()
  235. {
  236.         SDA3=1;
  237. //        uDelay(3);
  238.         SCL3=1;
  239. //        uDelay(3);
  240.         SCL3=0;
  241. //        uDelay(3);
  242. }


  245. void I2C_NAck3()
  246. {
  247.         SDA3=0;
  248. //        uDelay(3);
  249.         SCL3=1;
  250. //        uDelay(3);
  251.         SCL3=0;
  252. //        uDelay(3);
  253. }


  256. void I2C_Start3()
  257. {
  258.         SDA3=0;
  259. //        uDelay(3);
  260.         SCL3=1;
  261. //        uDelay(3);
  262.         SCL3=0;
  263. //        uDelay(3);
  264.         I2C_3(0x78);
  265.         I2C_Ack3();
  266. }


  269. void I2C_Stop3()
  270. {
  271.         SCL3=1;
  272. //        uDelay(5);
  273.         SDA3=0;
  274. //        uDelay(5);
  275.         SDA3=1;
  276. //        uDelay(5);
  277. }


  280. void Write_Command3(Uchar Data)
  281. {
  282.         I2C_Start3();
  283.         I2C_3(0x00);
  284.         I2C_Ack3();
  285.         I2C_3(Data);
  286.         I2C_Ack3();
  287.         I2C_Stop3();
  288. }


  291. void Write_Data3(Uchar Data)
  292. {
  293.         I2C_Start3();
  294.         I2C_3(0x40);
  295.         I2C_Ack3();
  296.         I2C_3(Data);
  297.         I2C_Ack3();
  298.         I2C_Stop3();
  299. }
  300. //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  302. void        LCD_Init3(void)
  303. {
  304. //RES3=0;
  305. //uDelay(2);
  306. //RES3=1;
  307. //internal setting


  310. Write_Command3(0xae);        //--turn off oled panel

  312. Write_Command3(0x00);        //--set low column address
  313. Write_Command3(0x10);        //--set high column address

  315. Write_Command3(0x40);        //--set start line address

  317. Write_Command3(0xb0);        //--set page address

  319. Write_Command3(0x81);        //--set contrast control register
  320. Write_Command3(0xff);

  322. Write_Command3(0xa1);        //--set segment re-map 127 to 0   a0:0 to seg127
  323. Write_Command3(0xa6);        //--set normal display

  325. Write_Command3(0xc8);        //--set com(N-1)to com0  c0:com0 to com(N-1)

  327. Write_Command3(0xa8);        //--set multiples ratio(1to64)
  328. Write_Command3(0x3f);        //--1/64 duty

  330. Write_Command3(0xd3);        //--set display offset
  331. Write_Command3(0x00);        //--not offset

  333. Write_Command3(0xd5);        //--set display clock divide ratio/oscillator frequency
  334. Write_Command3(0x80);        //--set divide ratio

  336. Write_Command3(0xd9);        //--set pre-charge period
  337. Write_Command3(0xf1);

  339. Write_Command3(0xda);        //--set com pins hardware configuration
  340. Write_Command3(0x12);

  342. Write_Command3(0xdb);        //--set vcomh
  343. Write_Command3(0x40);

  345. Write_Command3(0x8d);        //--set chare pump enable/disable
  346. Write_Command3(0x14);        //--set(0x10) disable
  347. //Write_Command3(0x10);        //--set(0x10) disable
  348. Write_Command3(0xaf);        //--turn on oled panel
  349. //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=void         LCD_Init(void)
  350. }


  353. //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  354. void pic13(void)
  355. {
  356.         Uchar i,j;
  357.         Uint k;
  358.         k=0;
  359.         for(j=0;j<8;j++)
  360.         {
  361.                 Write_Command3(0x22);//--set page1
  362.                 Write_Command3(j);//--set start page
  363.                 Write_Command3(0x07);//--set end page

  365.                 for(i=0;i<128;i++)                                                  //显示单色数据到LCD
  366.                 {
  367.                         Write_Data3(color13[k]);
  368.                         k=k+1;
  369.                
  370.                 }
  371.         }
  372. }


  375. void pic14(void)
  376. {
  377.         Uchar i,j;
  378.         Uint k;
  379.         k=0;
  380.         for(j=0;j<8;j++)
  381.         {
  382.                 Write_Command3(0x22);//--set page1
  383.                 Write_Command3(j);//--set start page
  384.                 Write_Command3(0x07);//--set end page

  386.                 for(i=0;i<128;i++)                                                  //显示单色数据到LCD
  387.                 {
  388.                         Write_Data3(color14[k]);
  389.                         k=k+1;
  390.                
  391.                 }
  392.         }
  393. }
  394.                        
  395. //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  397. //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  398. void main()
  399. {

  401.         LCD_Init3();

  403.         while(1)

  405.         {   
  406.                 pic13();
  407.                 delay_ms(10);
  408.                 pic14();
  409.                 delay_ms(10);

  411.         }
  412. }
复制代码




作者: 王可乐_    时间: 2020-1-27 10:26
你好，我复制了你的代码编译没有错误噢，只有WARNING L16: UNCALLED SEGMENT, IGNORED FOR OVERLAY PROCESS，，你上面的systax error我碰到的时候，都是中英输入法混了，你的=可能用了中文
作者: csmyldl    时间: 2020-1-27 16:46
图片未显示,看不到错误提示信息,点击错误信息可以去解决问题
作者: taotie    时间: 2020-1-27 18:04


仿真正常~~~




欢迎光临 (http://www.51hei.com/bbs/) Powered by Discuz! X3.1