标题: Access to register of unclocked peripheral at 0x40010800 cause BUS_FAULT [U1_... [打印本页]

作者: 安婧    时间: 2020-6-2 10:28
标题: Access to register of unclocked peripheral at 0x40010800 cause BUS_FAULT [U1_...
改正了一下电路图,但是系统一直警告Access to register of unclocked peripheral at 0x40010800 cause BUS_FAULT [U1_CM3CORE],为什么呀

51hei截图20200602102311.png (33.38 KB, 下载次数: 73)

51hei截图20200602102311.png

作者: luo12dan66    时间: 2020-6-2 12:00
R5-R8电阻的阻值是有问题的,单片机输出是5V,5/100=0.05A(50mA),50mA*4路=200mA,单片机是没办法输出这么高的电流的,建议每一路改成1K你再试试看把!
作者: 瓜瓜76    时间: 2020-6-2 13:40
应该是程序有问题,你有外设没有打开时钟就去使用它。




欢迎光临 (http://www.51hei.com/bbs/) Powered by Discuz! X3.1