带时钟日历的无线呼叫系统原理图PCB文件与单片机源程序 -

/********************************************************
2012.06.08 增加“换钱”语音工作模式
2012.07.04 增加时钟、呼叫类型显示
2012.07.25 硬件匹配“MST_719_V02”以上
2012.08.25 配合新的硬件"MST_719_V04"取消换钱语音，恢复分区模式
2012.10.22 更改在设置时间和恢复出厂设置菜单退出时语音相反的错误
2013.12.14 增加报警音
2014.04.22 更改为“金麒龙”呼叫器速率和编码
*********************************************************/
#include <iostm8s103k3.h>
#include<Prot_define.h>
#include"ProJ_Voice.H"
#include"Global_variable.h"
#include"main.h"
#include"Proj_Menu.H"
unsigned int duty_vlue;
unsigned char key_values;
//系统时钟设置
void CLK_init(void)
{
CLK_CKDIVR = 0x08;
}
void EXIT_init(void)
{
PB_DDR_DDR4 = 0;
PB_CR1_C14 = 1;
PB_CR2_C24 = 1;
EXTI_CR1 = 0x0c;
}
void TIM1_init(void)
{
TIM1_PSCRH = 0x00;
TIM1_PSCRL = 0x07;
TIM1_CR1 = 0x01;
}
void TIM2_init(void)
{
CLK_PCKENR1 |= 0X20;
//TIM2_PSCRH = 0x00;
TIM2_PSCR |= 0x03;
TIM2_ARRH = 0x13;
TIM2_ARRL = 0x88;
TIM2_IER |= 0x01;
TIM2_CR1 |= 0x01;
}
void Sys_Port_Init(void)
{
// PA_DDR = 0X00;
PA_CR1 |= 0X0E; //0000 1110
// PA_CR2 = 0X00;
PB_DDR |= 0X6F;
PB_CR1 |= 0X9F;
PB_CR2 |= 0X1f;
PC_DDR |= 0XFF;//
PC_CR1 |= 0XFF;
PC_CR2 |= 0XFF;
PD_DDR |= 0X19;
PD_CR1 |= 0XCD;
// PD_DDR &= 0XF7;
// PD_DDR &= 0X37;//20110727
PD_CR2 |= 0X11;//20110727
PE_DDR |= 0X00;
PE_CR1 |= 0X20;
PF_DDR = 0X00;
PF_CR1 |= 0X10;
}
unsigned int tt1,tt2,tt_flag;
#pragma vector=TIM2_OVR_UIF_vector
__interrupt void TIM2_OVR_UIF(void)
{
TIM2_SR1 = 0; // 清除更新中断标记
tt2++;
flag_5ms = 1;
key_values=((PA_IDR&0X0E))>>1;
key_values|=((PF_IDR&0X10))>>1;
key_values|=((PB_IDR&0X80))>>3;
key_values|=((PD_IDR&0XC0))>>1;//增加按键于20110727
if(tt2 > 99)
{
if((Menu_Value==0)&&(Called_Number==0))
Prot_clock_LED = ~Prot_clock_LED;
else Prot_clock_LED = 0;
tt2=0;
flag_500ms = !flag_500ms;
if(key_values!=0x7f)
{
if(Key_downTime<50)
Key_downTime++;
}
if(flag_500ms)flag_1s=1;
if(Onemin_del++>=120)
{
Onemin_del=0;
flag_1min=1;
}
}
}
#pragma vector=0x06
__interrupt void EXTI_PB4(void)
{
unsigned char temp;
temp = PB_IDR&0x10;
TIM1_CR1=0;
duty_vlue=TIM1_CNTRH;
duty_vlue=(duty_vlue<<8)+TIM1_CNTRL;
TIM1_CNTRH = 0;
TIM1_CNTRL = 0;
TIM1_CR1=1;
if(PC<(Frame_L_+1))
{
if(duty_vlue<Lower_Limit)
{
PC=0;
}
else if(duty_vlue>Upper_Limit)
{
PC=0;
}
else
{
if(temp == 0)//if(temp == 0x10)20110727
{
if(PC<Frame_L_)
{FS_H<<=1;
FS_H|=(FS_M>>7);
FS_M<<=1;
FS_M|=(FS_L>>7);
FS_L<<=1;
if(duty_vlue>Data_0_) FS_L|=0x01;
}
duty_vlue=0;
PC++;
}
}
}
else
{
if(duty_vlue>Last_Lower)
{
// flag_FS_OVER=1;
TIM1_CR1=0;
TIM1_CNTRH = 0;
TIM1_CNTRL = 0;
TIM1_CR1=1;
if((FS_Hdata==FS_H)&&
(FS_Mdata==FS_M)&&
(FS_Ldata==FS_L))
flag_FS_OVER=1;
else
{
FS_Hdata=FS_H;
FS_Mdata=FS_M;
FS_Ldata=FS_L;
}
}
duty_vlue=0;
PC=0;
}
}
void init_devices(void)
{
asm("sim");
CLK_init();
Sys_Port_Init();
EXIT_init();
TIM1_init();
TIM2_init();
IWDG_KR = 0XCC;
IWDG_KR = 0x55;
IWDG_PR |= 0x04;
IWDG_KR = 0x55;
IWDG_RLR = 0XFF;
asm("rim");
}
/******************************************************************
- 功能描述：时钟读取
- 隶属模块：
- 函数属性：供桌面刷新使用
- 参数说明：无
- 返回说明：
- 注：每一秒读取一次8563的时钟信息
******************************************************************/
void Right_Time(void)
{
reed_rtc(0x02,&SystemTime[2],7);
system_sec &= 0x7f;
system_min &= 0x7f;
system_hour &= 0x3f;
system_day &= 0x3f;
system_week &= 0x07;
system_mon &= 0x1f;
}
void Pro_RF_Reseive(void)
{
unsigned char Re_Room;
flag_FS_OVER=0;
flag_blink=0;
flag_ProDisplay=1;
FS_keyvalue=FS_Ldata&0xf;
Re_Room=Lookup_RoomNumber();
if(Re_Room==0)
{Pro_yk();return;}
switch(Menu_Value)
{
case RECEIVE_MODE:
if(Re_Room==0xa5){ Add_call(); } break;
case STUDY_COD:
if(Re_Room==0xaa) Stor_RoomNumber(); break;
default: break;
}
}
unsigned char warn_del,warn_del2,warn_out_1s;//BF20110317
unsigned char warn_in; //BF20110317
void Pro_5ms(void)
{
flag_5ms=0;
flag_ProDisplay=1;
//bf
/* if(Prot_WarnIN)
{
warn_del++;
if(warn_del>10)
{
warn_del2=0;
warn_in=1;
//warn_del=0;
if(warn_out_1s==0)
{
warn_out_1s=1;
Prot_Warnout=1;
}
if((warn_del>200)&&(Called_Number==0))
Prot_Warnout=0;
}
}
else
{
warn_del2++;
if(warn_del>10)
{
warn_del=0;
warn_in=0;
//warn_del2=0;
warn_out_1s=0;
}
}*/
if(key_values==0x7f)
{//bracket_1
flag_Key_Down=0;
KeyDown_del=0;
Key_downTime=0;
KeyValue=0;
}//bracket_1
else
{//bracket_2
if(!flag_Key_Down)
{//bracket_3
if(KeyDown_del++>5)
{
KeyDown_del=0;
flag_Key_Down=1;
flag_KeyPro=1;
asm("nop");asm("nop");
KeyValue=key_values;
asm("nop");asm("nop");
Send_data(0x4b,0x55);
Returnmod=0;
}
}//bracket_3
else Long_Keydown();
}//bracket_2
if(flag_yk)
{ yk_del++;
if(yk_del>120)
{
yk_del=0;
flag_yk=0;
}
}
}
void Pro_1s(void)
{
register uchar i;
unsigned char K;
unsigned char j,k1;
flag_1s=0;
if(Ptime) //整点报时
{
if((system_min==0)&&(system_sec==0))
{
// Pro_Display();
j=system_hour>>4;
k1=system_hour&0xf;
buff[0]=0x49;
buff[1]=0x31;
buff[2]=0x3a;
buff[3]=(j ? j : 0x53);
buff[4]=(j ? 0x3e : 0x53);
buff[5]=(k1 ? k1 :0x53);
buff[6]=0x41;
System_Sound(buff,7);
}
}
if(Called_Number)
{
if(Rdis_Time)
{
Rdisp++;
if(Rdisp>=Rdis_Time)
{
Rdisp=0;
Pcall_dis++;
if(Pcall_dis>Called_Number)
Pcall_dis=1;
}
}
if(Clear_time)
{
if(Called_Number>20)
K=20;
else K=Called_Number;
for(i=0;i<K;i++)
{
Call_time[i]++;
if(Call_time[i]>=Clear_time)
{
Pcall_dis=i+1;
Dele_call();
}
}
}
if(Remind_time)
{
if(Called_Number>20)
K=20;
else K=Called_Number;
for(i=0;i<K;i++)
{
if(Remind_buff[i]<Remind_time)
Remind_buff[i]++;
}
if(Remind_buff[Pcall_dis-1]>=Remind_time)
flag_blink=1;
else flag_blink=0;
}
}
if(flag_V)
{
flag_V++;
if(flag_V>=3)
{
flag_V=0;
Menu_Value=0;
}
}
if(flag_stor)
{
Stor_del++;
if(Stor_del>=3)
{
Stor_del=0;
flag_stor=0;
Add_RoomNumber();
red_iic((Room_PageNumber<<5)+(RoomPage_addr*3)+2,buff2,1);//*
while((buff2[0]&0x0f)==0x0a)
{
ClearWdg();
Add_RoomNumber();
red_iic((Room_PageNumber<<5)+(RoomPage_addr*3)+2,buff2,1);
}//*
}
}
if(Menu_Value)
{
Returnmod++;
if(Returnmod>=240)
{ Returnmod=0;
Menu_Value=0;}
}
}
void Init_Value(void)
{
unsigned char x;
Menu_Value=0;
KeyValue=0;
Returnmod=0;
flag_V=0;
flag_Time_Set=0;
// Prot_Warnout=1;//bf
red_iic(EEP_KEY_NUMBER,&Key_Number,25);
Prot_LED=1;
//Right_Time();
voice_set(); //语音设置
delay1ms(500);
ClearWdg();
delay1ms(50);
// Prot_Warnout=0;//bf
Set_Volume();
Send_code(0x8d);
Send_data(0x4a,0x71);//开机音乐
tm1640_init();
while (Onemin_del<10)
{
for(x=0;x<16;x++) {buff[x]=Onemin_del;}
Display(buff,16);
ClearWdg();
//if(flag_FS_OVER||(key_values!=0x7f))
if(key_values!=0x7f)
break;
}
Prot_LED=0;//20110727
//Send_voice(0x50);
// if(Volume_value)
Send_data(0x47,0x55);
Right_Time();
}
void main(void)
{
init_devices();
Sys_Port_Init();
Init_Value();
Send_data(0x4a,0x71);//开机音乐
while(1)
{
if(flag_KeyPro) Pro_KEY();
if(flag_5ms==1) Pro_5ms();
if(flag_FS_OVER) Pro_RF_Reseive();
if(flag_ProDisplay) Pro_Display();
if(flag_1s) Pro_1s();//Send_code(0x8d);
// if(flag_playtime && (flag_Key_Down==0)) Play_time(); //当前时间播报,由于代码长度受限，取消此功能
if(flag_HJ==1){HJ_sound();Send_code(0x8d);}
if(flag_modsound && (flag_Key_Down==0)) Work_mode_s();
if(Menu_Value == 0) Right_Time();
ClearWdg();
}
}

复制代码