STC15单片机+DS3231+DS18B20+DHT11+OLED12864+ESP8266_01S组成网络时间有待改善 -

#include "delay.h"
#include "oled12864.h"
#include "uart.h"
#include "esp8266.h"
#include "ds18b20.h"
#include "DHT11.h"
#include "DS3231.h"
sbit led1=P0^6;
sbit led2=P0^7;
uint8 a,wendu;
uint16 b,c;
void riqi(void);
void shijian(void);
void Uart2_Init(void);
/*********************定时器函数************************************/
void Timer0Init() //100微秒@22.1184MHz
{
AUXR |= 0x80; //定时器时钟1T模式
TMOD &= 0xF0; //设置定时器模式
TL0 = 0x5C; //设置定时初始值
TH0 = 0xF7; //设置定时初始值
TF0 = 0; //清除TF0标志
TR0 = 1; //定时器0开始计时
}
void Timer1Init() //1000微秒@22.1184MHz
{
AUXR |= 0x40; //定时器时钟1T模式
TMOD &= 0x0F; //设置定时器模式
TL1 = 0x9A; //设置定时初始值
TH1 = 0xA9; //设置定时初始值
TF1 = 0; //清除TF1标志
TR1 = 1; //定时器1开始计时
}
void timer0() interrupt 1
{
TL0 = 0x5C; //设置定时初始值
TH0 = 0xF7; //设置定时初始值
TF0 = 0;
b++;
if(b>1000)
{
b=0;
led1=~led1;
}
}
void timer1() interrupt 3 //定时器1的中断
{
TL1 = 0x9A; //设置定时初始值
TH1 = 0xA9; //设置定时初始值
c++;
if(c>1000)
{
c=0;
led2=~led2;
}
}
void duishi()
{
delayms(1000);
UART2_SendStr("GET http://api.k780.com:88/?app=life.time&appkey=10003&sign=b59bc3ef6191eb9f747dd4e83c99f2a4&format=json\r\n\r\n");
nian=(Data[6]-48)*10+(Data[7]-48);
yue=(Data[9]-48)*10+(Data[10]-48);
ri=(Data[12]-48)*10+(Data[13]-48);
zhou=Data2[4]-48;
shi=(Data[15]-48)*10+(Data[16]-48);
fen=(Data[18]-48)*10+(Data[19]-48);
miao=(Data[21]-48)*10+(Data[22]-48)+4;
if(miao>60) {miao=60;fen+=1;}
Ds3231Init();
//SendString("+++");
}
void main()
{
Timer0Init();//初始化定时器0
Timer1Init();//初始化定时器1
EA=1;//开启总中断
ET0=1;//开启定时器0中断
ET1=1;//开启定时器1中断
Delayus(6000);
P0M0=0X00;P0M1=0X00;
P1M0=0X00;P1M1=0X00;
P2M0=0X00;P2M1=0X00;
P3M0=0X00;P3M1=0X00;
P4M0=0X00;P4M1=0X00;
P5M0=0X00;P5M1=0X00;
P6M0=0X00;P6M1=0X00;
OLED_Init();
OLED_Fill(0xff);
delayms(200);
OLED_Fill(0x00);
delayms(200);
OLED_CLS();
Uart2_Init();
zhoucqh();
ESP8266_Init();
duishi();
while(1)
{
temget();
wendu=temget();
DHT11_receive();
Ds3231ReadTime();
shijian();
riqi();
}
}
void riqi(void)
{
OLED_P8x16Ch(0,0,yue/10);
OLED_P8x16Ch(8,0,yue%10);
OLED_P8x16Ch(16,0,13);
OLED_P8x16Ch(24,0,ri/10);
OLED_P8x16Ch(32,0,ri%10);
OLED_P8x16Ch(80,0,12);
OLED_P8x16Ch(88,0,wendu%100/10);
OLED_P8x16Ch(96,0,wendu%10);
OLED_P8x16Ch(104,0,11);
OLED_P8x16Ch(112,0,RH/10);
OLED_P8x16Ch(120,0,RH%10);
}
void shijian(void)
{
OLED_P16x32Ch(0,2,shi/10);
OLED_P16x32Ch(16,2,shi%10);
OLED_P16x32Ch(32,2,10);
OLED_P16x32Ch(48,2,fen/10);
OLED_P16x32Ch(64,2,fen%10);
OLED_P16x32Ch(80,2,10);
OLED_P16x32Ch(96,2,miao/10);
OLED_P16x32Ch(112,2,miao%10);
OLED_P16x16Ch(0,6,24);
OLED_P16x16Ch(16,6,25);
if(zhou==0)OLED_P16x16Ch(32,6,26);
else OLED_P16x16Ch(32,6,zhou);
}

复制代码