ESP8266开发板NODEMCU点灯科技WIFI插座小度智能屏远控测试成功 -

// 低电平继电器动作，高电平继电器释放小度语音操作成功，20211121
/////////////////////////////////////////////////////////////////////////////////
#define BLINKER_WIFI
#define BLINKER_MIOT_OUTLET
#define BLINKER_DUEROS_OUTLET
#define BLINKER_ALIGENIE_OUTLET
#define BLINKER_PRINT Serial
#include <WiFiManager.h>
#include <Blinker.h>
char auth[] = "--------";
int relay = 2;
int key = 0;
int counter = 0;
BlinkerButton Button1("btn-abc");
WiFiManager wifiManager;
char devname[] = "ESP8266_chazuo";
void WebConfig() {
Serial.println("Entered config mode...");
wifiManager.setConfigPortalTimeout(60);
wifiManager.autoConnect(devname);
WiFi.hostname(devname);
Serial.println("");
Serial.print("ESP8266 Connected to ");
Serial.println(WiFi.SSID());
Serial.print("IP address:\t");
Serial.println(WiFi.localIP());
}
//=================================================================
void button1_callback(const String & state)
{
BLINKER_LOG("app操作了!: ", state);
if (digitalRead(relay)==LOW) {
BLINKER_LOG("灭灯!");
digitalWrite(relay, HIGH);
Button1.color("gray");
Button1.text("插座已关闭");
Button1.print("off");
}
else if (digitalRead(relay)==HIGH) {
BLINKER_LOG("亮灯!");
digitalWrite(relay,LOW);
Button1.color("red");
Button1.text("插座已打开");
Button1.print("on");
}
}
//=================================================================
void miotPowerState(const String & state)
{
BLINKER_LOG("小爱语音操作!");
if (state == BLINKER_CMD_ON){
digitalWrite(relay,LOW);
BlinkerMIOT.powerState("on");
BLINKER_LOG("亮灯!");
BlinkerMIOT.print();
}
else if (state == BLINKER_CMD_OFF){
digitalWrite(relay,HIGH);
BlinkerMIOT.powerState("off");
BLINKER_LOG("灭灯!");
BlinkerMIOT.print();
}
}
//=================================================================
void miotQuery(int32_t queryCode)
{
BLINKER_LOG("MIOT Query codes: ", queryCode);
switch (queryCode)
{
case BLINKER_CMD_QUERY_ALL_NUMBER :
BLINKER_LOG("MIOT Query All");
BlinkerMIOT.powerState(relay ? "on" : "off");
BlinkerMIOT.print();
break;
case BLINKER_CMD_QUERY_POWERSTATE_NUMBER :
BLINKER_LOG("MIOT Query Power State");
BlinkerMIOT.powerState(relay ? "on" : "off");
BlinkerMIOT.print();
break;
default :
BlinkerMIOT.powerState(relay ? "on" : "off");
BlinkerMIOT.print();
break;
}
}
//=================================================================
void duerPowerState(const String & state)
{
BLINKER_LOG("小度语音操作!"); //串口打印
if (state == BLINKER_CMD_ON){
digitalWrite(relay,LOW);
BlinkerDuerOS.powerState("on"); //????
BLINKER_LOG("亮灯!");
BlinkerDuerOS.print();
}
else if (state == BLINKER_CMD_OFF){
digitalWrite(relay,HIGH);
BlinkerDuerOS.powerState("off");
BLINKER_LOG("灭灯!");
BlinkerDuerOS.print();
}
}
//=================================================================
void duerQuery(int32_t queryCode)
{
BLINKER_LOG("DuerOS Query codes: ", queryCode);
switch (queryCode)
{
case BLINKER_CMD_QUERY_ALL_NUMBER :
BLINKER_LOG("DuerOS Query All");
BlinkerDuerOS.powerState(relay ? "on" : "off");
BlinkerDuerOS.print();
break;
case BLINKER_CMD_QUERY_POWERSTATE_NUMBER :
BLINKER_LOG("DuerOS Query Power State");
BlinkerDuerOS.powerState(relay ? "on" : "off");
BlinkerDuerOS.print();
break;
default :
BlinkerDuerOS.powerState(relay ? "on" : "off");
BlinkerDuerOS.print();
break;
}
}
//=================================================================
void aligeniePowerState(const String & state)
{
BLINKER_LOG("天猫精灵语音操作!");
if (state == BLINKER_CMD_ON){
digitalWrite(relay,LOW);
BlinkerAliGenie.powerState("on");
BLINKER_LOG("亮灯!");
BlinkerAliGenie.print();
}
else if (state == BLINKER_CMD_OFF){
digitalWrite(relay,HIGH);
BlinkerAliGenie.powerState("off");
BLINKER_LOG("灭灯!");
BlinkerAliGenie.print();
}
}
//=================================================================
void aligenieQuery(int32_t queryCode)
{
BLINKER_LOG("AliGenie Query codes: ", queryCode);
switch (queryCode)
{
case BLINKER_CMD_QUERY_ALL_NUMBER :
BLINKER_LOG("AliGenie Query All");
BlinkerAliGenie.powerState(relay ? "on" : "off");
BlinkerAliGenie.print();
break;
case BLINKER_CMD_QUERY_POWERSTATE_NUMBER :
BLINKER_LOG("AliGenie Query Power State");
BlinkerAliGenie.powerState(relay ? "on" : "off");
BlinkerAliGenie.print();
default :
BlinkerAliGenie.powerState(relay ? "on" : "off");
BlinkerAliGenie.print();
break;
}
}
//=================================================================
void dataRead(const String & data)
{
BLINKER_LOG("Blinker readString: ", data);
Blinker.vibrate();
uint32_t BlinkerTime = millis();
Blinker.print("millis", BlinkerTime);
}
//=========================================================================
void heartbeat()
{
BLINKER_LOG("状态同步!");
if (digitalRead(relay)==LOW)
{
Button1.print("on");
Button1.color("red");
Button1.text("继电器打开");
}
else
{
Button1.print("off");
Button1.color("gray");
Button1.text("继电器关闭");
}
}
//=================================================================
void sdms()
{
if (digitalRead(relay)==HIGH&&digitalRead(key)==LOW)
{
Blinker.delay(400);
if (digitalRead(key)==HIGH)
{
BLINKER_LOG("本地开关动作!");
BLINKER_LOG("亮灯!");
digitalWrite(relay,LOW);
Button1.color("red");
Button1.text("继电器打开");
Button1.print("on");
}
}
if (digitalRead(relay)==LOW&&digitalRead(key)==LOW)
{
Blinker.delay(400);
if (digitalRead(key)==HIGH)
{
BLINKER_LOG("本地开关动作!");
BLINKER_LOG("灭灯!");
digitalWrite(relay, HIGH);
Button1.color("gray");
Button1.text("继电器关闭");
Button1.print("off");
}
}
}
//=================================================================
void setup()
{ Serial.begin(115200);
delay(10);
BLINKER_DEBUG.stream(Serial);
BLINKER_DEBUG.debugAll();
pinMode(relay, OUTPUT);
digitalWrite(relay, LOW);
pinMode(key,INPUT_PULLUP);
WebConfig();
Blinker.begin(auth, WiFi.SSID().c_str(), WiFi.psk().c_str());
Button1.attach(button1_callback);
Blinker.attachData(dataRead);
Blinker.attachHeartbeat(heartbeat);
BlinkerMIOT.attachPowerState(miotPowerState);
BlinkerDuerOS.attachPowerState(duerPowerState);
BlinkerAliGenie.attachPowerState(aligeniePowerState);
BlinkerMIOT.attachQuery(miotQuery);
BlinkerDuerOS.attachQuery(duerQuery);
BlinkerAliGenie.attachQuery(aligenieQuery);
}
//=================================================================
void loop() {
Blinker.run();
sdms();
}

复制代码