标题: STMF103单片机读AB编码器程序有问题吗 [打印本页]

作者: xiuyan    时间: 2022-2-10 15:58
标题: STMF103单片机读AB编码器程序有问题吗
函数功能:把TIM2初始化为编码器接口模式
入口参数:无
返回  值:无
**************************************************************************/
void Encoder_Init_TIM2(void)
{
        TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;  
  TIM_ICInitTypeDef TIM_ICInitStructure;  
  GPIO_InitTypeDef GPIO_InitStructure;
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);//使能定时器4的时钟
//  RCC_APB2PeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);//使能PB端口时钟
//      
//  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1;        //端口配置
//  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; //浮空输入
//  GPIO_Init(GPIOA, &GPIO_InitStructure);     
        //根据设定参数初始化GPIOB
          RCC_APB2PeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);//使能PB端口时钟

  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6|GPIO_Pin_7;        //端口配置
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; //浮空输入
  GPIO_Init(GPIOB, &GPIO_InitStructure);         

  TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);
  TIM_TimeBaseStructure.TIM_Prescaler = 0x0; // 预分频器
  TIM_TimeBaseStructure.TIM_Period = 1024; //设定计数器自动重装值
  TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;//选择时钟分频:不分频
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;////TIM向上计数  
  TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
  TIM_EncoderInterfaceConfig(TIM2, TIM_EncoderMode_TI12, TIM_ICPolarity_Rising, TIM_ICPolarity_Rising);//使用编码器模式3
  TIM_ICStructInit(&TIM_ICInitStructure);
  TIM_ICInitStructure.TIM_ICFilter = 10;
  TIM_ICInit(TIM2, &TIM_ICInitStructure);
  TIM_ClearFlag(TIM2, TIM_FLAG_Update);//清除TIM的更新标志位
  TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
  //Reset counter
  TIM_SetCounter(TIM2,0);
  TIM_Cmd(TIM2, ENABLE);
}






欢迎光临 (http://www.51hei.com/bbs/) Powered by Discuz! X3.1