error C141: syntax error near '[', expected ')' -

标题: error C141: syntax error near '[', expected ')' [打印本页]

作者: 16622723091 时间: 2022-8-28 14:44
标题: error C141: syntax error near '[', expected ')'
大佬们可以帮我看看这个错误怎么改吗，就这一个错生成不了

111.c(10): error C141: syntax error near '[', expected ')'

这是代码
#include <reg52.h>
#include<intrins.h>
#include"1602.h"
unsigned long num = 0,time = 0;
unsigned char dis1[]={"Welcome!"};
unsigned char dis2[]={"heart rate:"};
unsigned long LcdOut[4];
unsigned long rate;
unsigned long lcd_init();
unsigned long lcd_wdat(dis1[ i]);[ i]
void Timer0() interrupt 1
{
      TH0 = 0x0D8;       //10ms????
TL0 = 0x0F0;
      time++;                //time????,?????
}
void exint0() interrupt 0             //????0
{
         if(num==0)                //?????????,???????R?
         {
            ET0=1;
TR0 = 1;       //?????????
            rate=0;                //?????0???
         }
      num++;                //??????,num??,?R???
}
void main()
{
  unsigned char i = 0;

  //??????0
  TMOD = 0x01;
  TH0 = 0x0D8;       //10ms????
  TL0 = 0x0F0;
  IT0 = 1;                //????0?????
  EA = 1;          //?????
  EX0 = 1;                //??????0
  //??????
  lcd_init();                               //???LCD
  delay(10);
  lcd_pos(4);                               //????????????5???
      while(dis1[ i] != '\0')[ i]
      {                                              //????"welcome!"
            lcd_wdat(dis1[ i]);[ i]
            i++;
      }
  delay(2000);       //??2?,??????
  //?????? heart rate: ??
  lcd_init();
  i = 0;
  lcd_pos(1);                               //????????????1???
      while(dis2[ i] != '\0')[ i]
      {                                              //????"welcome!"
            lcd_wdat(dis2[ i]);[ i]
            i++;
      }
  while(1)
  {
      if(num>=3)
{
            rate = 6000*2/time;       //????(?/??),?2?R-R?????????
            num=1;time=0;                      //?0(1)??,????????2?RR??
//????????RR?????????,?????????,????,???????????
      }
               //?LCD1602?????
               LcdOut[0]=rate%1000/100+0x30;
   LcdOut[1]=rate%100/10+0x30;
   LcdOut[2]=rate%10+0x30;
               for( i=0; i<3; i++)
               {
            lcd_pos(i+0x43);             //????????2?
            lcd_wdat(LcdOut[ i]);[ i]
               }
  }
}

作者: 16622723091 时间: 2022-8-28 14:46
unsigned long lcd_wdat(dis1);这行的错误

作者: Hephaestus 时间: 2022-8-28 16:25
unsigned long lcd_wdat(dis1[ i]);[ i]

作者: xuyaqi 时间: 2022-8-28 18:42
程序没给全。

作者: xxxevery 时间: 2022-8-28 20:52
111.c(10): error C141: syntax error near '[', expected ')'

不是说的很清楚了吗？第10行语句有语法错误，转到第10行：unsigned long lcd_wdat(dis1[ i]);[ i]一看不就发现语句末分号后面多了个[i]，这种keil软件的错误提示看不懂就查百度啊

作者: haiyang201 时间: 2022-8-29 07:45
复制的程序，好多错误不止这一处，都需要改

作者: 名字不是重点 时间: 2022-8-29 17:42
百度翻译是个好工具，你值得拥有！

欢迎光临 (http://www.51hei.com/bbs/)