编译错误error: At end of source: #18: expected a ")" -

标题: 编译错误error: At end of source: #18: expected a ")" [打印本页]

作者: 阿牛——牛 时间: 2023-1-7 14:55
标题: 编译错误error: At end of source: #18: expected a ")"
void rt_fs00603a_init(void)
{
rt_thread_t tid;

fs00603a_mutex = rt_mutex_create("fs00603amt", RT_IPC_FLAG_PRIO);
RT_ASSERT(fs00603a_mutex != RT_NULL);

#ifdef RT_USING_HEAP
tid = rt_thread_create("fs00603a",
fs00603a_thread_entry,
RT_NULL,
RT_FS00603A_THREAD_STACK_SIZE,
RT_FS00603A_THREAD_PRIORITY,
20);
RT_ASSERT(tid != RT_NULL);
fs00603a_rx_sem = rt_sem_create("fsrxsem", 0, RT_IPC_FLAG_FIFO);
#else
rt_err_t result;
tid = &bt_thread;
result = rt_thread_init(tid,
"fs00603",
fs00603a_thread_entry,
RT_NULL,
bt_stack,
sizeof(bt_stack),
RT_FS00603A_THREAD_PRIORITY,
20);
RT_ASSERT(result == RT_EOK);
#endif

rt_thread_startup(tid);
}

编译后报以下错误
error: At end of source: #18: expected a ")"

此程序在另一台电脑上是可以编译通过的，设置也是一样，版本也一样。

作者: devcang 时间: 2023-1-8 08:45
检查文件编码

作者: 阿牛——牛 时间: 2023-1-10 09:11
谢谢你！

作者: ZzCp 时间: 2023-6-5 20:37
void rt_fs00603a_init(void)
{
rt_thread_t tid;

fs00603a_mutex = rt_mutex_create("fs00603amt", RT_IPC_FLAG_PRIO);
RT_ASSERT(fs00603a_mutex != RT_NULL);

#ifdef RT_USING_HEAP
tid = rt_thread_create("fs00603a",
                        fs00603a_thread_entry,
                        RT_NULL,
                        RT_FS00603A_THREAD_STACK_SIZE,
                        RT_FS00603A_THREAD_PRIORITY,
                        20);
RT_ASSERT(tid != RT_NULL);
fs00603a_rx_sem = rt_sem_create("fsrxsem", 0, RT_IPC_FLAG_FIFO);
#else
rt_err_t result;
static rt_uint8_t fs00603a_stack[RT_FS00603A_THREAD_STACK_SIZE];
tid = rt_thread_create(&tid,
                        "fs00603",
                        fs00603a_thread_entry,
                        RT_NULL,
                        fs00603a_stack,
                        sizeof(fs00603a_stack),
                        RT_FS00603A_THREAD_PRIORITY,
                        20);
RT_ASSERT(tid != RT_NULL);
#endif

rt_thread_startup(tid);
}

作者: ZzCp 时间: 2023-6-5 20:37
void rt_fs00603a_init(void) { rt_thread_t tid; fs00603a_mutex = rt_mutex_create("fs00603amt", RT_IPC_FLAG_PRIO); RT_ASSERT(fs00603a_mutex != RT_NULL); #ifdef RT_USING_HEAP tid = rt_thread_create("fs00603a", fs00603a_thread_entry, RT_NULL, RT_FS00603A_THREAD_STACK_SIZE, RT_FS00603A_THREAD_PRIORITY, 20); RT_ASSERT(tid != RT_NULL); fs00603a_rx_sem = rt_sem_create("fsrxsem", 0, RT_IPC_FLAG_FIFO); #else rt_err_t result; static rt_uint8_t fs00603a_stack[RT_FS00603A_THREAD_STACK_SIZE]; tid = rt_thread_create(&tid, "fs00603", fs00603a_thread_entry, RT_NULL, fs00603a_stack, sizeof(fs00603a_stack), RT_FS00603A_THREAD_PRIORITY, 20); RT_ASSERT(tid != RT_NULL); #endif rt_thread_startup(tid); }

作者: ZzCp 时间: 2023-6-5 20:39
在 #else 条件分支内对 tid 进行了非法赋值。bt_thread 的类型是 struct rt_thread，而不是 rt_thread_t。
在 #else 条件分支内对 tid 进行了非法初始化。tid 的类型是 rt_thread_t，&bt_thread 并不符合 rt_thread_t 的定义。
在 #else 条件分支内对 bt_stack 和 sizeof(bt_stack) 进行了非法使用。这两个变量在这个条件分支里没有定义，应该使用正确的线程堆栈变量和大小。

作者: 少年。。。 时间: 2023-6-20 09:03
是语法错误吗？

欢迎光临 (http://www.51hei.com/bbs/)