标题: MSP430单片机4Pin OLED显示代码 [打印本页]
作者: 龙某人    时间: 2023-4-8 17:16
标题: MSP430单片机4Pin OLED显示代码
看完网友在STM32上驱动0.96寸4PIN IIC OLED显示字符、数字、字符串、中文的讲解及代码后，现在将其移植了MSP430G2553/MSP430F552上，代码在原来的基础上做了一丢丢修改。原文链接：https://www.cnblogs.com/dragonet-Z/p/14689345.html

oled.h的代码如下：
  1. /*
  2. * 代码贡献作者：Dragonet-Z
  3. * 使用方式：
  4. *      在本 oled.h 的宏定义出修改对应的管脚;
  5. *      main()函数里面调用OLED_Init()函数;
  6. *      英文字符显示：OLED_ShowChar( 0,4,'O');
  7. *      英文字符串显示：OLED_ShowString(0,0,"HELLO MSP430");
  8. *      数字显示：OLED_ShowNum( 0,6,20,2);
  9. *      中文显示：OLED_ShowCHinese( 0,2,0); 在显示中文的时候，要在 oledfont.h 里面去修改对应的字库内容
  10. */

  12. #ifndef USER_OLED_H_
  13. #define USER_OLED_H_

  15. #include <msp430.h>

  17. /*--------------------IIC引脚定义--------------------------*/
  18. /*----------------需要改成自己实际连接的管脚--------------------*/
  19. #define OLED_SCL_PORT_OUT P2OUT
  20. #define OLED_SDA_PORT_OUT P2OUT
  21. #define OLED_SCL_PORT_DIR P2DIR
  22. #define OLED_SDA_PORT_DIR P2DIR
  23. #define OLED_SCL_PIN_NUM  BIT5
  24. #define OLED_SDA_PIN_BUM  BIT4

  26. /*--------------从使用的角度出发，以下代码不需要修改---------------*/
  27. /*--------------从使用的角度出发，以下代码不需要修改---------------*/
  28. /*--------------从使用的角度出发，以下代码不需要修改---------------*/

  30. /*--------------------引脚定义--------------------------*/
  31. #define OLED_SCLK_Clr() OLED_SCL_PORT_OUT &=~ OLED_SCL_PIN_NUM  //SCL
  32. #define OLED_SCLK_Set() OLED_SCL_PORT_OUT |=  OLED_SCL_PIN_NUM

  34. #define OLED_SDIN_Clr() OLED_SDA_PORT_OUT &=~ OLED_SDA_PIN_BUM  //SDA
  35. #define OLED_SDIN_Set() OLED_SDA_PORT_OUT |=  OLED_SDA_PIN_BUM

  37. #define OLED_SCL_PIN_DIR() OLED_SCL_PORT_DIR |= OLED_SCL_PIN_NUM;   //SCL-DIR
  38. #define OLED_SDA_PIN_DIR() OLED_SDA_PORT_DIR |= OLED_SDA_PIN_BUM;   //SDA-DIR

  40. /*definition--------------------------------------------*/
  41. #define OLED_CMD    0       // 写命令
  42. #define OLED_DATA   1       // 写数据
  43. #define SIZE        16      // 显示字符的大小
  44. #define Max_Column  128     // 最大列数
  45. #define Max_Row     64      // 最大行数
  46. #define X_WIDTH     128     // X轴的宽度
  47. #define Y_WIDTH     64      // Y轴的宽度
  48. #define IIC_ACK     0       // 应答
  49. #define IIC_NO_ACK  1       // 不应答


  52. /*-----------------声明函数-----------------------------*/
  53. void OLED_Display_On(void);     //开显示函数
  54. void OLED_Display_Off(void);    //关显示函数
  55. void OLED_Init(void);           //OLED初始化函数
  56. void OLED_Clear(void);          //清屏函数
  57. void OLED_ShowChar(unsigned char x,unsigned char y,unsigned char chr);      //显示字符函数
  58. void OLED_ShowNum(unsigned char x,unsigned char y,unsigned int num,unsigned char len);  //在指定的位置，显示一个指定数的长度大小函数
  59. void OLED_ShowString(unsigned char x,unsigned char y, unsigned char *p);    //在指定位置开始显示字符串函数
  60. void OLED_Set_Pos(unsigned char x, unsigned char y);        //画点函数
  61. void OLED_ShowCHinese(unsigned char x,unsigned char y,unsigned char no);    //声明在指定位置显示汉字函数
  62. void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]); //显示图片函数
  63. void OLED_Scroll(void);         //滚动函数



  67. #endif /* USER_OLED_H_ */

复制代码



oled.c的代码如下：
  1. /*
  2. * 代码贡献作者：Dragonet-Z
  3. */

  5. /*--------------从使用的角度出发，以下代码不需要修改，直接调用对应的显示函数即可---------------*/
  6. /*--------------从使用的角度出发，以下代码不需要修改，直接调用对应的显示函数即可---------------*/
  7. /*--------------从使用的角度出发，以下代码不需要修改，直接调用对应的显示函数即可---------------*/

  9. /*includes----------------------------------------------*/
  10. #include "oled.h"
  11. #include "oledfont.h"
  12. /*definition--------------------------------------------*/

  14. static void OLED_IIC_Start(void);
  15. static void OLED_IIC_Stop(void);
  16. static void Write_IIC_Command(unsigned char IIC_Command);
  17. static void Write_IIC_Data(unsigned char IIC_Data);
  18. static void Write_IIC_Byte(unsigned char IIC_Byte);
  19. static void IIC_Wait_Ack(void);
  20. //static void delay(unsigned char num);

  22. ///*
  23. // * @brief           延迟1us
  24. // * @param           无
  25. // * @retval      无
  26. // */
  27. //static void delay(unsigned char num)
  28. //{
  29. //    unsigned char i = 10;
  30. //    while(num--)
  31. //    {
  32. //        while(i--);
  33. //    }
  34. //}


  37. /*
  38. * @brief           ms延迟函数
  39. * @param           无
  40. * @retval      无
  41. */
  42. static void delay_ms(unsigned int ms)//延迟函数，MS级别
  43. {
  44.     unsigned int x,y;
  45.     for(x = ms;x>0;x--)
  46. {
  47.         for(y = 12000;y>0;y--);
  48. }
  49. }

  51. /*
  52. * @brief           模拟IIC起始信号
  53. * @param           无
  54. * @retval      无
  55. */
  56. static void OLED_IIC_Start(void)
  57. {
  58.     OLED_SCLK_Set();
  59.     OLED_SDIN_Set();
  60.     OLED_SDIN_Clr();
  61.     OLED_SCLK_Clr();
  62. }


  65. /*
  66. * @brief           模拟IIC停止信号
  67. * @param           无
  68. * @retval      无
  69. */
  70. static void OLED_IIC_Stop(void)
  71. {
  72.     OLED_SCLK_Set() ;
  73. //  OLED_SCLK_Clr();
  74.     OLED_SDIN_Clr();
  75.     OLED_SDIN_Set();
  76. }


  79. /*
  80. * @brief           模拟IIC读取从机应答信号
  81. * @param           无
  82. * @retval      无
  83. */
  84. static void IIC_Wait_Ack(void)
  85. {
  86.     OLED_SCLK_Set() ;
  87.     OLED_SCLK_Clr();
  88. }


  91. /*
  92. * @brief           模拟IIC主机发送应答信号
  93. * @param           无
  94. * @retval      无
  95. */
  96. // static void IIC_Send_Ack(unsigned char ack)
  97. // {
  98. //  OLED_SCLK_Clr();    //时钟线置低
  99. //  delay(1);   //延迟1us

  101. //  if(ack == IIC_ACK)  //根据情况发送应答/不应答
  102. //      OLED_SDIN_Clr();    //应答
  103. //  else
  104. //      OLED_SDIN_Set();    //不应答
  105. //  delay(1);   //延迟1us

  107. //  OLED_SCLK_Set();    //时钟线置高，发送应答/不应答信号
  108. //  delay(1);   //延迟1us
  109. //  OLED_SCLK_Clr();    //时钟线置低
  110. //  delay(1);   //延迟1us
  111. // }


  114. /*
  115. * @brief           IIC写入一个字节
  116. * @param           IIC_Byte：写入的字节
  117. * @retval      无
  118. */
  119. static void Write_IIC_Byte(unsigned char IIC_Byte)
  120. {
  121.     unsigned char i;
  122.     unsigned char m,da;
  123.     da=IIC_Byte;
  124.     OLED_SCLK_Clr();
  125.     for(i=0;i<8;i++)
  126.     {
  127.             m=da;
  128.         //  OLED_SCLK_Clr();
  129.         m=m&0x80;
  130.         if(m==0x80)
  131.         {OLED_SDIN_Set();}
  132.         else OLED_SDIN_Clr();
  133.             da=da<<1;
  134.         OLED_SCLK_Set();
  135.         OLED_SCLK_Clr();
  136.     }
  137. }



  141. /*
  142. * @brief           IIC写读取一个字节
  143. * @param           ack：应答/不应答
  144. * @retval      无
  145. */
  146. // static unsigned char Read_IIC_Byte(unsigned char ack)
  147. // {
  148. //  unsigned char data = 0;  //定义变量
  149. //  unsigned char i;  //定义变量

  151. //  OLED_SCLK_Clr();    //时钟线置低，为传输数据做准备
  152. //  delay(1);   //延迟1us

  154. //  OLED_SDIN_Set();

  156. //  for(i=0;i<8;i++) //for循环8次
  157. //  {
  158. //      OLED_SCLK_Set();    //时钟线置高，读取数据
  159. //      delay(1);   //延迟1us

  161. //      data <<= 1; //左移1位
  162. //      if(OLED_READ_SDIN())    //读取最高位
  163. //          data |= 0x01;   //读到高位位1
  164. //      else
  165. //          data &= 0xfe;   //读到高位为0

  167. //      OLED_SCLK_Clr();    //时钟线置低，准备读取下一个数据
  168. //      delay(1);   //延迟1us
  169. //  }

  171. //  IIC_Send_Ack(ack);  //发送应答/不应答

  173. //  return data;    //返回读取到的数据
  174. // }


  177. /*
  178. * @brief           IIC写入命令
  179. * @param           IIC_Command：写入的命令
  180. * @retval      无
  181. */
  182. static void Write_IIC_Command(unsigned char IIC_Command)
  183. {
  184.     OLED_IIC_Start();
  185.     Write_IIC_Byte(0x78);            //Slave address,SA0=0
  186.      IIC_Wait_Ack();
  187.     Write_IIC_Byte(0x00);            //write command
  188.      IIC_Wait_Ack();
  189.     Write_IIC_Byte(IIC_Command);
  190.      IIC_Wait_Ack();
  191.      OLED_IIC_Stop();
  192. }


  195. /*
  196. * @brief           IIC写入数据
  197. * @param           IIC_Data：数据
  198. * @retval      无
  199. */
  200. static void Write_IIC_Data(unsigned char IIC_Data)
  201. {
  202.     OLED_IIC_Start();
  203.     Write_IIC_Byte(0x78);            //D/C#=0; R/W#=0
  204.      IIC_Wait_Ack();
  205.     Write_IIC_Byte(0x40);            //write data
  206.      IIC_Wait_Ack();
  207.     Write_IIC_Byte(IIC_Data);
  208.      IIC_Wait_Ack();
  209.      OLED_IIC_Stop();
  210. }


  213. /*
  214. * @brief           对OLED写入一个字节
  215. * @param           dat：数据
  216. *      cmd：1，写诶数据；0，写入命令
  217. * @retval      无
  218. */
  219. static void OLED_WR_Byte(unsigned char dat,unsigned char cmd)
  220. {
  221.     if(cmd)
  222.       {
  223.        Write_IIC_Data(dat); //写入数据
  224.       }
  225.     else {
  226.        Write_IIC_Command(dat); //写入命令
  227.     }
  228. }


  231. /*
  232. * @brief           设置数据写入的起始行、列
  233. * @param           x： 列的起始低地址与起始高地址；0x00~0x0f：设置起始列低地址（在页寻址模式）；
  234. *      0x10~0x1f：设置起始列高地址（在页寻址模式）
  235. *      y：起始页地址 0~7
  236. * @retval      无
  237. */
  238. void OLED_Set_Pos(unsigned char x, unsigned char y)
  239. {
  240.     OLED_WR_Byte(0xb0+y,OLED_CMD);//写入页地址
  241.     OLED_WR_Byte((x&0x0f),OLED_CMD);  //写入列的地址  低半字节
  242.     OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);//写入列的地址 高半字节
  243. }


  246. /*
  247. * @brief           开显示
  248. * @param           无
  249. * @retval      无
  250. */
  251. void OLED_Display_On(void)
  252. {
  253.     OLED_WR_Byte(0X8D,OLED_CMD);  //设置OLED电荷泵
  254.     OLED_WR_Byte(0X14,OLED_CMD);  //使能，开
  255.     OLED_WR_Byte(0XAF,OLED_CMD);  //开显示
  256. }


  259. /*
  260. * @brief           关显示
  261. * @param           无
  262. * @retval      无
  263. */
  264. void OLED_Display_Off(void)
  265. {
  266.     OLED_WR_Byte(0XAE,OLED_CMD);  //关显示
  267.     OLED_WR_Byte(0X8D,OLED_CMD);  //设置OLED电荷泵
  268.     OLED_WR_Byte(0X10,OLED_CMD);  //失能，关
  269. }


  272. /*
  273. * @brief           清屏
  274. * @param           无
  275. * @retval      无
  276. */
  277. void OLED_Clear(void)
  278. {
  279.     unsigned char i,n;          //定义变量
  280.     for(i=0;i<8;i++)
  281.     {
  282.         OLED_WR_Byte (0xb0+i,OLED_CMD);    //从0~7页依次写入
  283.         OLED_WR_Byte (0x00,OLED_CMD);      //列低地址
  284.         OLED_WR_Byte (0x10,OLED_CMD);      //列高地址
  285.         for(n=0;n<128;n++)OLED_WR_Byte(0,OLED_DATA); //写入 0 清屏
  286.     }
  287. }


  290. /*
  291. * @brief           显示一个字符
  292. * @param           x：起始列
  293. *      y：起始页，SIZE = 16占两页；SIZE = 12占1页
  294. *      chr：字符
  295. * @retval      无
  296. */
  297. void OLED_ShowChar(unsigned char x,unsigned char y,unsigned char chr)
  298. {
  299.     unsigned char c=0,i=0;
  300.         c=chr-' '; //获取字符的偏移量
  301.         if(x>Max_Column-1){x=0;y=y+2;} //如果列数超出了范围，就从下2页的第0列开始

  303.         if(SIZE ==16) //字符大小如果为 16 = 8*16
  304.             {
  305.                 OLED_Set_Pos(x,y);  //从x y 开始画点
  306.                 for(i=0;i<8;i++)  //循环8次 占8列
  307.                 OLED_WR_Byte(F8X16[c*16+i],OLED_DATA); //找出字符 c 的数组位置，先在第一页把列画完
  308.                 OLED_Set_Pos(x,y+1); //页数加1
  309.                 for(i=0;i<8;i++)  //循环8次
  310.                 OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA); //把第二页的列数画完
  311.             }
  312.         else    //字符大小为 6 = 6*8
  313.             {
  314.                 OLED_Set_Pos(x,y+1); //一页就可以画完
  315.                 for(i=0;i<6;i++) //循环6次 ，占6列
  316.                 OLED_WR_Byte(F6x8[c][i],OLED_DATA); //把字符画完
  317.             }
  318. }


  321. /*
  322. * @brief           计算m^n
  323. * @param           m：输入的一个数
  324. *      n：输入数的次方
  325. * @retval      result：一个数的n次方
  326. */
  327. static unsigned int oled_pow(unsigned char m,unsigned char n)
  328. {
  329.     unsigned int result=1;
  330.     while(n--)result*=m;
  331.     return result;
  332. }


  335. /*
  336. * @brief           在指定的位置，显示一个指定长度大小的数
  337. * @param           x：起始列
  338. *      y：起始页
  339. *      num：数字
  340. *      len：数字的长度
  341. * @retval      无
  342. */
  343. void OLED_ShowNum(unsigned char x,unsigned char y,unsigned int num,unsigned char len)
  344. {
  345.     unsigned char t,temp;  //定义变量
  346.     unsigned char enshow=0;     //定义变量
  347.     unsigned char size;
  348.     size = len*8;

  350.     for(t=0;t<len;t++)
  351.     {
  352.         temp=(num/oled_pow(10,len-t-1))%10;//取出输入数的每个位，由高到低
  353.         if(enshow==0&&t<(len-1)) //enshow：是否为第一个数；t<(len-1)：判断是否为最后一个数
  354.         {
  355.             if(temp==0) //如果该数为0
  356.             {
  357.                 OLED_ShowChar(x+(size/2)*t,y,' ');//显示 0 ；x+(size2/2)*t根据字体大小偏移的列数（8）
  358.                 continue; //跳过剩下语句，继续重复循环（避免重复显示）
  359.             }else enshow=1;
  360.         }
  361.         OLED_ShowChar(x+(size/2)*t,y,temp+'0'); //显示一个位；x+(size2/2)*t根据字体大小偏移的列数（8）
  362.     }
  363. }


  366. /*
  367. * @brief           显示字符串
  368. * @param           x：起始列
  369. *      y：起始页
  370. *      *chr：第一个字符首地址
  371. * @retval      无
  372. */
  373. void OLED_ShowString(unsigned char x,unsigned char y,unsigned char *chr)
  374. {
  375.     unsigned char j=0; //定义变量

  377.     while (chr[j]!='\0') //如果不是最后一个字符
  378.     {
  379.         OLED_ShowChar(x,y,chr[j]); //显示字符
  380.         x+=8; //列数加8 ，一个字符的列数占8
  381.         if(x>=128){x=0;y+=2;} //如果x大于等于128，切换页，从该页的第一列显示
  382.         j++; //下一个字符
  383.     }
  384. }


  387. /*
  388. * @brief           显示中文
  389. * @param           x：起始列；一个字体占16列
  390. *      y：起始页；一个字体占两页
  391. *      no：字体的序号
  392. * @retval      无
  393. */
  394. void OLED_ShowCHinese(unsigned char x,unsigned char y,unsigned char no)
  395. {
  396.     unsigned char t,adder=0; //定义变量

  398.     OLED_Set_Pos(x,y);  //从 x y 开始画点，先画第一页
  399.     for(t=0;t<16;t++) //循环16次，画第一页的16列
  400.         {
  401.             OLED_WR_Byte(Hzk[2*no][t],OLED_DATA);//画no在数组位置的第一页16列的点
  402.             adder+=1; //数组地址加1
  403.         }
  404.         OLED_Set_Pos(x,y+1); //画第二页
  405.     for(t=0;t<16;t++)//循环16次，画第二页的16列
  406.         {
  407.             OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA);//画no在数组位置的第二页16列的点
  408.             adder+=1;//数组地址加1
  409.         }
  410. }


  413. /*
  414. * @brief           显示图片
  415. * @param           x0：起始列地址
  416. *      y0：起始页地址
  417. *      x1：终止列地址
  418. *      y1：终止页地址
  419. *      BMP[]：存放图片代码的数组
  420. * @retval      无
  421. */
  422. void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[])
  423. {
  424.     unsigned int j=0; //定义变量
  425.     unsigned char x,y; //定义变量

  427.     if(y1%8==0) y=y1/8;   //判断终止页是否为8的整数倍
  428.      else y=y1/8+1;

  430.         for(y=y0;y<y1;y++) //从起始页开始，画到终止页
  431.         {
  432.             OLED_Set_Pos(x0,y); //在页的起始列开始画
  433.             for(x=x0;x<x1;x++) //画x1 - x0 列
  434.                 {
  435.                     OLED_WR_Byte(BMP[j++],OLED_DATA);   //画图片的点
  436.                 }
  437.         }
  438. }


  441. /*
  442. * @brief           OLED初始化函数
  443. * @param           无
  444. * @retval      无
  445. */
  446. void OLED_Init(void)
  447. {
  448.     OLED_SCL_PIN_DIR();
  449.     OLED_SDA_PIN_DIR();

  451.     delay_ms(200);  //延迟，由于单片机上电初始化比OLED快，所以必须加上延迟，等待OLED上复位完成

  453.     OLED_WR_Byte(0xAE,OLED_CMD);    //关闭显示

  455.     OLED_WR_Byte(0x00,OLED_CMD);    //设置低列地址
  456.     OLED_WR_Byte(0x10,OLED_CMD);    //设置高列地址
  457.     OLED_WR_Byte(0x40,OLED_CMD);    //设置起始行地址
  458.     OLED_WR_Byte(0xB0,OLED_CMD);    //设置页地址

  460.     OLED_WR_Byte(0x81,OLED_CMD);    // 对比度设置，可设置亮度
  461.     OLED_WR_Byte(0xFF,OLED_CMD);    //  265

  463.     OLED_WR_Byte(0xA1,OLED_CMD);    //设置段（SEG）的起始映射地址；column的127地址是SEG0的地址
  464.     OLED_WR_Byte(0xA6,OLED_CMD);    //正常显示；0xa7逆显示

  466.     OLED_WR_Byte(0xA8,OLED_CMD);    //设置驱动路数（16~64）
  467.     OLED_WR_Byte(0x3F,OLED_CMD);    //64duty

  469.     OLED_WR_Byte(0xC8,OLED_CMD);    //重映射模式，COM[N-1]~COM0扫描

  471.     OLED_WR_Byte(0xD3,OLED_CMD);    //设置显示偏移
  472.     OLED_WR_Byte(0x00,OLED_CMD);    //无偏移

  474.     OLED_WR_Byte(0xD5,OLED_CMD);    //设置震荡器分频
  475.     OLED_WR_Byte(0x80,OLED_CMD);    //使用默认值

  477.     OLED_WR_Byte(0xD9,OLED_CMD);    //设置 Pre-Charge Period
  478.     OLED_WR_Byte(0xF1,OLED_CMD);    //使用官方推荐值

  480.     OLED_WR_Byte(0xDA,OLED_CMD);    //设置 com pin configuartion
  481.     OLED_WR_Byte(0x12,OLED_CMD);    //使用默认值

  483.     OLED_WR_Byte(0xDB,OLED_CMD);    //设置 Vcomh，可调节亮度（默认）
  484.     OLED_WR_Byte(0x40,OLED_CMD);    ////使用官方推荐值

  486.     OLED_WR_Byte(0x8D,OLED_CMD);    //设置OLED电荷泵
  487.     OLED_WR_Byte(0x14,OLED_CMD);    //开显示

  489.     OLED_WR_Byte(0xAF,OLED_CMD);    //开启OLED面板显示
  490.     OLED_Clear();        //清屏
  491.     OLED_Set_Pos(0,0);   //设置数据写入的起始行、列
  492. }


  495. /*
  496. * @brief           OLED滚屏函数，范围0~1页，水平向左
  497. * @param           无
  498. * @retval      无
  499. */
  500. void OLED_Scroll(void)
  501. {
  502.     OLED_WR_Byte(0x2E,OLED_CMD);    //关闭滚动
  503.     OLED_WR_Byte(0x27,OLED_CMD);    //水平向左滚动
  504.     OLED_WR_Byte(0x00,OLED_CMD);    //虚拟字节
  505.     OLED_WR_Byte(0x00,OLED_CMD);    //起始页 0
  506.     OLED_WR_Byte(0x00,OLED_CMD);    //滚动时间间隔
  507.     OLED_WR_Byte(0x01,OLED_CMD);    //终止页 1
  508.     OLED_WR_Byte(0x00,OLED_CMD);    //虚拟字节
  509.     OLED_WR_Byte(0xFF,OLED_CMD);    //虚拟字节
  510.     OLED_WR_Byte(0x2F,OLED_CMD);    //开启滚动
  511. }
复制代码


oledfont.h字库代码如下：
  1. /*
  2. * oledfont.h
  3. * 代码贡献作者：Dragonet-Z
  4. */

  6. #ifndef USER_OLEDFONT_H_
  7. #define USER_OLEDFONT_H_



  11. //常用ASCII表
  12. //偏移量32
  13. //ASCII字符集
  14. //偏移量32
  15. //大小:12*6
  16. /************************************6*8的点阵************************************/
  17. const unsigned char  F6x8[][6] =
  18. {
  19. 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
  20. 0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
  21. 0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
  22. 0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
  23. 0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
  24. 0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
  25. 0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
  26. 0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
  27. 0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
  28. 0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
  29. 0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
  30. 0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
  31. 0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
  32. 0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
  33. 0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
  34. 0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
  35. 0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
  36. 0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
  37. 0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
  38. 0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
  39. 0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
  40. 0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
  41. 0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
  42. 0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
  43. 0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
  44. 0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
  45. 0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
  46. 0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
  47. 0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
  48. 0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
  49. 0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
  50. 0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
  51. 0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
  52. 0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
  53. 0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
  54. 0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
  55. 0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
  56. 0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
  57. 0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
  58. 0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
  59. 0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
  60. 0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
  61. 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
  62. 0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
  63. 0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
  64. 0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
  65. 0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
  66. 0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
  67. 0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
  68. 0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
  69. 0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
  70. 0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
  71. 0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
  72. 0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
  73. 0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
  74. 0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
  75. 0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
  76. 0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
  77. 0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
  78. 0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
  79. 0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
  80. 0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
  81. 0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
  82. 0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
  83. 0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
  84. 0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
  85. 0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
  86. 0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
  87. 0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
  88. 0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
  89. 0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
  90. 0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
  91. 0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
  92. 0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
  93. 0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
  94. 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
  95. 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
  96. 0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
  97. 0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
  98. 0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
  99. 0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
  100. 0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
  101. 0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
  102. 0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
  103. 0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
  104. 0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
  105. 0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
  106. 0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
  107. 0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
  108. 0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
  109. 0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
  110. 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
  111. };
  112. /****************************************8*16的点阵************************************/
  113. const unsigned char  F8X16[]=
  114. {
  115.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  116.   0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  117.   0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  118.   0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  119.   0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  120.   0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  121.   0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  122.   0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  123.   0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  124.   0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  125.   0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  126.   0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  127.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  128.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  129.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  130.   0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  131.   0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  132.   0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  133.   0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  134.   0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  135.   0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  136.   0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  137.   0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  138.   0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  139.   0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  140.   0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  141.   0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  142.   0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  143.   0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  144.   0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  145.   0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  146.   0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  147.   0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  148.   0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  149.   0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  150.   0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  151.   0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  152.   0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  153.   0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  154.   0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  155.   0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  156.   0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  157.   0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  158.   0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  159.   0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  160.   0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  161.   0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  162.   0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  163.   0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  164.   0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  165.   0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  166.   0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  167.   0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  168.   0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  169.   0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  170.   0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  171.   0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  172.   0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  173.   0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  174.   0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  175.   0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  176.   0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  177.   0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  178.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  179.   0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  180.   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  181.   0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  182.   0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  183.   0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  184.   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  185.   0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  186.   0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  187.   0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  188.   0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  189.   0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  190.   0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  191.   0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  192.   0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  193.   0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  194.   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  195.   0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  196.   0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  197.   0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  198.   0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  199.   0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  200.   0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  201.   0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  202.   0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  203.   0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  204.   0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  205.   0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  206.   0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  207.   0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  208.   0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  209.   0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
  210. };
  211. const unsigned char  Hzk[][32]={

  213. {0x20,0x24,0x24,0x24,0xFE,0x23,0x22,0x20,0x20,0xFF,0x20,0x22,0x2C,0xA0,0x20,0x00},
  214. {0x00,0x08,0x48,0x84,0x7F,0x02,0x41,0x40,0x20,0x13,0x0C,0x14,0x22,0x41,0xF8,0x00},/*"我",0*/
  215. {0x80,0x64,0x2C,0x34,0x24,0x24,0xEC,0x32,0x22,0x22,0x32,0x2E,0x23,0xA2,0x60,0x00},
  216. {0x00,0x41,0x21,0x91,0x89,0x87,0x4D,0x55,0x25,0x25,0x55,0x4D,0x81,0x80,0x80,0x00},/*"爱",1*/
  217. {0x00,0x00,0xF8,0x49,0x4A,0x4C,0x48,0xF8,0x48,0x4C,0x4A,0x49,0xF8,0x00,0x00,0x00},
  218. {0x10,0x10,0x13,0x12,0x12,0x12,0x12,0xFF,0x12,0x12,0x12,0x12,0x13,0x10,0x10,0x00},/*"单",2*/
  219. {0x00,0x00,0x00,0xFE,0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x20,0x00,0x00},
  220. {0x00,0x80,0x60,0x1F,0x02,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x00},/*"片",3*/
  221. {0x10,0x10,0xD0,0xFF,0x90,0x10,0x00,0xFE,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00},
  222. {0x04,0x03,0x00,0xFF,0x00,0x83,0x60,0x1F,0x00,0x00,0x00,0x3F,0x40,0x40,0x78,0x00},/*"机",4*/

  224. };



  228. #endif /* USER_OLEDFONT_H_ */



复制代码

MSP430_4PIN_OLED.zip

140.59 KB, 下载次数: 39, 下载积分: 黑币 -5

MSP430 G2553/F5529 驱动OLED显示程序
作者: buzzcutboy    时间: 2023-5-11 22:21
请问一下楼主自己使用代码的时候是不是只需要复制oled.h oled.c oledfont.h和main.c四个文件？除了引脚还有没有什么需要修改的地方？文件路径需要修改吗？不知道为什么跑不出来
作者: 吴维荣    时间: 2023-7-28 00:29
buzzcutboy 发表于 2023-5-11 22:21
请问一下楼主自己使用代码的时候是不是只需要复制oled.h oled.c oledfont.h和main.c四个文件？除了引脚还有 ...

应该是这样,大部分代码都贴出来了
作者: 龙某人    时间: 2023-12-18 14:59
buzzcutboy 发表于 2023-5-11 22:21
请问一下楼主自己使用代码的时候是不是只需要复制oled.h oled.c oledfont.h和main.c四个文件？除了引脚还有 ...

非常抱歉，时刻差不多半年才看到这个消息。平时没有51这个论坛

这个OLED的驱动方式用的是GPIO模拟IIC的，所以正常来说只要在oled.h里面修改一下对应的管脚就可以了，关于OLED驱动的代码都在oled.c , oled.h , oledfont.h这三个文件里了，用的时候需要先主函数里调用OLED_Init()这个初始化函数。

以下代码是我当时测试显示内容的main.c的代码，希望对后面的人有所帮助吧：
#include <msp430.h>

/**
* main.c
*/

#include "oled.h"

int main(void)
{
    WDTCTL = WDTPW | WDTHOLD;   // stop watchdog timer

    OLED_Init();                //OLED初始化函数

    OLED_ShowString(0,0,"HELLO MSP430");

    // 我(0) 爱(1) 单(2) 片(3) 机(4)
    OLED_ShowCHinese( 0,2,0);
    OLED_ShowCHinese(16,2,1);
    OLED_ShowCHinese(32,2,2);
    OLED_ShowCHinese(48,2,3);
    OLED_ShowCHinese(64,2,4);

    //逐个显示字符“OLED-TEST”
    OLED_ShowChar( 0,4,'O');
    OLED_ShowChar( 8,4,'L');
    OLED_ShowChar(16,4,'E');
    OLED_ShowChar(24,4,'D');
    OLED_ShowChar(32,4,'-');
    OLED_ShowChar(40,4,'T');
    OLED_ShowChar(48,4,'E');
    OLED_ShowChar(56,4,'S');
    OLED_ShowChar(64,4,'T');

    //显示数字
    OLED_ShowNum( 0,6,12,2);
    OLED_ShowNum(16,6,34,2);
    OLED_ShowNum(24,6,5 ,1);
    OLED_ShowNum(32,6,6 ,1);
    OLED_ShowNum(40,6,7 ,1);
    OLED_ShowNum(48,6,8 ,1);

    return 0;
}
作者: 龙某人    时间: 2023-12-18 15:21
提供两个其他网友的关于MSP430G2553和MSP430F5529的例程开源链接，里面包含了各种外设驱动的例程，例程挺丰富的：
【链接01】MSP430G2553口袋实验平台例程资料:https://www.elecfans.com/soft/6/2019/20190717995381.html
【链接02】MSP430F5529例程:https://www.elecfans.com/soft/33/2016/20160117399910.html
【链接03】基于TI MSP430的单片机学习系统：https://gitee.com/NEagle/MSP-LAB



欢迎光临 (http://www.51hei.com/bbs/) Powered by Discuz! X3.1