标题: 点阵动态显示乱码问题 [打印本页]

---

作者: 凌浩风格    时间: 2015-1-27 13:37
标题: 点阵动态显示乱码问题
#include<reg52.h>
#define uint unsigned int
#define uchar unsigned char
sbit DULA=P3^0;
sbit WELA=P3^1;
uchar code HANG[]={0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,};
uchar code LIE_2[]=
{
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0xC3,0xE7,0x7E,0x3C,0x3C,0x7E,0xE7,0xC3,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
};
uchar c,d,i=0,z;
void delay(uint z)
{
uint x,y;
for(x=z;x>0;x--)
    for(y=110;y>0;y--);
}
void main()
{
while(1)
{
for(z=0;z<8;z++)
{
c=i+z;
DULA=1;
P1=HANG[z];
DULA=0;
delay(1);
WELA=1;
P1=LIE_2[c];
WELA=0;
delay(1);
}
i++;
if(i>=16)
i=0;
delay(1000);
}
}

---

作者: wind02072107    时间: 2015-1-27 17:12


要看一下原理图的哦

---

作者: 凌浩风格    时间: 2015-1-28 09:40

wind02072107 发表于 2015-1-27 17:12
要看一下原理图的哦

没原理图就是3.0接了573  3.1也接了576  然后用P1口

---

欢迎光临 (http://www.51hei.com/bbs/)

Powered by Discuz! X3.1