彩色mini摇摇棒制作（双色） -

#include <AT89X52.h>
#define uchar unsigned char
#define uint unsigned int
sbit KeyChoose=P0^3;
sbit KeyLeft=P2^7;
sbit KeyRight=P2^6;
sbit Zero=P2^0;
uchar Color;
uchar code LEDDriverTable[]=
{
0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00, // 1~ 8
0x01,0x03,0x07,0x0f,0x1f,0x3f,0x7f,0xff // 9~15
};
/////////////////////////////////////////////////////////////////////////
// 汉字字模表 //
// 纵向取模下高位,数据排列:从上到下从左到右 //
/////////////////////////////////////////////////////////////////////////
uchar code GB16wo[] = // 数据表
{
//"你",
0x40,0x00,0x20,0x00,0xF8,0xFF,0x07,0x00,
0x40,0x00,0x20,0x08,0x18,0x04,0x0F,0x43,
0x08,0x80,0xC8,0x7F,0x08,0x00,0x08,0x01,
0x28,0x06,0x18,0x0C,0x00,0x00,0x00,0x00,
//"爱",
0x40,0x00,0xB0,0x00,0x92,0x40,0x96,0x30,
0x9A,0x8C,0x92,0x83,0xF2,0x46,0x9E,0x2A,
0x92,0x12,0x91,0x2A,0x99,0x26,0x95,0x42,
0x91,0xC0,0x50,0x40,0x30,0x00,0x00,0x00,
//"我",
0x20,0x00,0x24,0x08,0x24,0x48,0x24,0x84,
0xFE,0x7F,0x23,0x02,0x22,0x21,0x20,0x10,
0xFF,0x09,0x20,0x06,0x22,0x1A,0xAC,0x61,
0x20,0x80,0x30,0xE0,0x20,0x00,0x00,0x00,
//"吗",
0x00,0x00,0xFC,0x1F,0x04,0x08,0x04,0x08,
0xFE,0x1F,0x04,0x08,0x02,0x08,0xFA,0x09,
0x02,0x09,0x02,0x09,0x02,0x0D,0xFF,0x49,
0x02,0x81,0x80,0x7F,0x00,0x01,0x00,0x00,
//"？",
0x00,0x00,0x00,0x00,0x30,0x00,0x38,0x00,
0x28,0x00,0x04,0x00,0x04,0x20,0x04,0x70,
0x84,0x73,0x84,0x21,0xC4,0x00,0x4C,0x00,
0x78,0x00,0x30,0x00,0x00,0x00,0x00,0x00
};
/*****n（us）延时子程序*****/
void Delay(uint N)
{
uint x,y;
for(x=0; x<=N;x++)
for(y=0;y<=2;y++);
}
void DisplayPoint(uchar LEDChoose, uchar Color)//bit Color)?//,uint DisplayTime) //15（×2）LED //LEDChoose（Up 1～15 Down），Color(0:Green;1:Blue),DisplayTime ()
{// uchar t;
//t=(LEDChoose-1)+Color*8;
if(LEDChoose>=1&LEDChoose<=8)
{
P1=LEDDriverTable[(LEDChoose-1)+Color*8];
P3=(!Color)*0xff; //!or~
}
else if(LEDChoose>=9&LEDChoose<=15)
{
P3=LEDDriverTable[(LEDChoose-1-8)+(Color*8)];
P1=(Color)*0xff;
}
else
{
P1=0xff;
P3=0xff;
}
//Delay(DisplayTime); //
}
void YScanDisplay(uchar YDisplay,uint DisplayTime,uchar UorD) //YScanDisplayData(8bit) ;
{
//bit PointTable[8];
// uchar PointTable[8]; //! LEDChoose is （Up 1～15 Down)
uchar i=0;
for(i=1;i<=8;i++)
//{
// while(YDisplay!=0)
{
// PointTable[i]=(bit)(YDisplay&0x01);
if((bit)(YDisplay&0x01)!=0) //target: (共阴～取反～共阳)
{
DisplayPoint(i+UorD*8,Color); //Color
Delay(DisplayTime);
}
YDisplay>>=1;
// i++;
}
//}
// for(i=0;i<=7;i++)
//while(PointTable[i]!='\0')
// {
// i++;
// }
}
void XScanDisplay()
{
}
/*****主函数*****/
void main(void)
{
uchar tt,ccc=1;
bit cc=0;
Zero = 0;
while(520)
// if(KeyRight=0)
{
if(KeyChoose=0)cc=!cc;
while(KeyLeft);
Delay(1400);
for(tt=1;tt<=160;tt++)
{
YScanDisplay(GB16wo[tt],2,tt%2);
if(++ccc==32){
Color=!Color;
ccc=0;}
}
P1=0xff;
P3=0xff;
while(KeyRight);
Delay(1400);
for(tt=160;tt>=1;tt--)
{
YScanDisplay(GB16wo[tt],2,tt%2);
if(++ccc==32){
Color=!Color;
ccc=0;}
}
P1=0xff;
P3=0xff;
};
//////////////////////以下为最开始的硬件测试程序，用来检测LED 有没有焊接好，有没有焊接烧坏等///////////////////////////
//效果是：首先是第一排亮，然后是第二排亮，最后全亮，当然这只是看起来全亮，但是 LED 不可能真正同时亮，实际上，某一时刻，只有一个被点亮
/*
// P1=0x80;
// P3=0x80;
for(tt=0;tt<=15;tt++)
{
DisplayPoint(tt,1);
Delay(10000);
}
for(tt=0;tt<=15;tt++)
{
DisplayPoint(tt,0);
Delay(10000);
}
while(520){
for(tt=0;tt<=15;tt++)
{
DisplayPoint(tt,1);
Delay(350);
DisplayPoint(tt,0);
Delay(700);
}}
while(520);
// while(1)
// {
//-----------忧伤的分割线-----------//
P1=0xfe; //0b
delay(100);
P1=0x01; //0r
delay(100);
P1=0xfc; //1b
delay(100);
P1=0x03; //1r
delay(100);
P1=0xf8; //2b
delay(100);
P1=0x07;
delay(100); //2r
P1=0x; //b
delay(100);
P1=0x; //r
delay(100);
while(1);
// }
*/
}
/*****END*****/

复制代码