标题: 立体旋转LED制作 [打印本页]
作者: xiashan    时间: 2015-4-5 16:46
标题: 立体旋转LED制作
相信这东西没什么新鲜了，很多人都做过，我也来分享一下制作的心得！

   由我的平面旋转LED改造的，改造很容易，就把平面的LED改成的立体的不就是了。因为用的是无线供电方式，旋转起来很安静，很平稳，电机的速度也够快的，旋转时不怎么闪烁。但是相机拍来视频来还是会有点闪，眼睛看不怎么觉得会闪。‍‍‍‍

       电源输入是6V1A的，经过无线供电模块后变成交流电用两个线圈感应电压来供旋转部分的电，PCB板上有简单的整流滤波电路。时钟的效果在这里就没演示了。板上的1302和后背电池在这里没用到，板子刚好平衡，旋转起来没什么太大的晃动。限流电阻改小点亮度估计会好很多！
小小玩意，忘论坛里的高手们多多指教！


视频效果：
http://v.youku.com/v_show/id_XMjI1OTQ4ODI4.html



程序比较简单：
  1. /*************************************************************
  2.                       旋转LED字体程序
  3. 单片机 STC89C52
  4. 字模软件用的PC2002
  5. 逐列取模方式
  6. ***************************************************************/
  7. #include <AT89X52.h>
  8. #define uchar unsigned char
  9. #define uint unsigned int    //宏定义

  11. sbit KEY=P3^2;
  12. sbit led1=P1^1;
  13. unsigned char code love[] = {
  14. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",0*/

  16. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",1*/

  18. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",2*/

  20. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",3*/

  22. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",4*/

  24. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",5*/

  26. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",6*/

  28. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",7*/

  30. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",8*/

  32. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",9*/


  35. 0xF7,0xDF,0xF7,0xE7,0x06,0xD8,0xB1,0xBF,0xB7,0xDF,0x37,0x60,0xEF,0x9F,0x57,0xE0,
  36. 0xD8,0xEF,0xDB,0xDF,0x1B,0xC0,0xDB,0xBD,0xDB,0xBD,0x9B,0xBD,0xDB,0xBF,0xFF,0xFF,/*"旋",0*/

  38. 0x37,0xF7,0x57,0xF7,0x63,0xFB,0x14,0x00,0x77,0xFB,0x77,0xFB,0x77,0xFF,0xBF,0xFD,
  39. 0xB7,0xF4,0x07,0xED,0xB0,0xDD,0xB7,0x2D,0xB7,0xF1,0xB7,0xFD,0xBF,0xFF,0xFF,0xFF,/*"转",1*/

  41. 0xF7,0xDF,0x07,0xC0,0xF7,0xDF,0xFF,0xDF,0xFF,0xDF,0xFF,0xDF,0xFF,0xCF,0xFF,0xFF,/*"L",2*/

  43. 0xF7,0xDF,0x07,0xC0,0x77,0xDF,0x77,0xDF,0x17,0xDC,0xF7,0xDF,0xEF,0xE7,0xFF,0xFF,/*"E",3*/

  45. 0xF7,0xDF,0x07,0xC0,0xF7,0xDF,0xF7,0xDF,0xF7,0xDF,0xEF,0xEF,0x1F,0xF0,0xFF,0xFF,/*"D",4*/

  47. 0xF7,0xFB,0xCE,0x03,0x79,0xFC,0x9F,0xFF,0xFF,0x7F,0x01,0xB8,0xFD,0xCF,0x0D,0xF0,
  48. 0xFD,0xEF,0x01,0x98,0xFF,0xFF,0x07,0xF8,0xFF,0xBF,0xFF,0x7F,0x00,0x80,0xFF,0xFF,/*"测",5*/

  50. 0xBF,0xFF,0xBD,0xFF,0x23,0x80,0xF7,0xDF,0xFF,0xEF,0x6F,0xDF,0x6F,0xDF,0x6F,0xE0,
  51. 0x6F,0xEF,0x6F,0xEF,0x00,0xFE,0xEF,0xF9,0xED,0xE7,0xE3,0xDF,0xEF,0x87,0xFF,0xFF,/*"试",6*/

  53. 0xF7,0xFD,0xF7,0xFE,0x76,0xFF,0x31,0x00,0x57,0xFF,0xE7,0x7C,0xFF,0xBF,0x01,0xCF,
  54. 0x7D,0xF0,0x7D,0xFF,0x7D,0xFF,0x7D,0x80,0x01,0x7F,0xFF,0x7F,0xFF,0x0F,0xFF,0xFF,/*"祝",7*/

  56. 0xDF,0xFF,0xDF,0x7F,0xDF,0xBF,0xDF,0xDF,0xDF,0xEF,0xDF,0xF3,0x5F,0xFC,0x80,0xFF,
  57. 0x5F,0xFE,0xDF,0xF9,0xDF,0xF7,0xDF,0xCF,0xDF,0x9F,0xDF,0x3F,0xDF,0xBF,0xFF,0xFF,/*"大",8*/

  59. 0xFF,0xFF,0xE7,0xD6,0xFB,0xD6,0xEB,0xEA,0x6B,0xEB,0x6B,0xB5,0x2A,0x76,0x49,0xBB,
  60. 0xEB,0xC0,0xEB,0xF9,0x6B,0xF6,0xFB,0xF6,0xEB,0xEF,0xF3,0xCF,0xFB,0xEF,0xFF,0xFF,/*"家",9*/

  62. 0xBF,0xFF,0xCF,0xFD,0xEF,0xFD,0xED,0xFD,0xA3,0xFD,0xAB,0xFD,0xAF,0xBD,0xAE,0x7D,
  63. 0xA1,0x80,0x2B,0xFD,0xAF,0xFD,0xE7,0xFD,0xA8,0xFD,0xCD,0xFD,0xEF,0xFD,0xFF,0xFF,/*"学",10*/

  65. 0xFF,0xFF,0xFF,0xFF,0xFD,0xFB,0xFD,0xF3,0xF5,0xFB,0xED,0xFD,0xDD,0xFD,0x9D,0xFE,
  66. 0xFD,0xFE,0x7D,0xFF,0x7D,0xDF,0xBD,0xBF,0xFD,0x7F,0x01,0x80,0xFF,0xFF,0xFF,0xFF,/*"习",11*/

  68. 0x7F,0xFF,0x7D,0xBF,0x63,0xDF,0x77,0xE0,0xFF,0xDF,0x77,0xAF,0x77,0xB3,0x00,0xBC,
  69. 0x77,0xBF,0x77,0xBF,0x77,0xBF,0x00,0xA0,0x77,0xBF,0x77,0xBF,0x7F,0xBF,0xFF,0xFF,/*"进",12*/

  71. 0xFF,0xFF,0xDF,0xBB,0xDF,0xBB,0xDF,0xBD,0x43,0xBE,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,
  72. 0x00,0xE8,0xDB,0xEF,0xDB,0xF7,0xDB,0xFB,0xDB,0xFC,0xDF,0xFD,0xDF,0xFF,0xFF,0xFF,/*"步",13*/

  74. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xA0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
  75. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*"！",14*/

  77. 0xFF,0xFF,0x1F,0xF0,0xEF,0xEF,0xF7,0xDF,0xF7,0xDF,0xEF,0xEF,0x1F,0xF0,0xFF,0xFF,/*"0",15*/

  79. 0xFF,0xFF,0xC7,0xFF,0xF7,0xFF,0xF7,0xC0,0x37,0xFF,0xC7,0xFF,0xF7,0xFF,0xFF,0xFF,/*"7",16*/

  81. 0xFF,0xFF,0xFF,0xFF,0x07,0xF0,0xB7,0xFB,0xB7,0xFB,0xB7,0xFB,0xB7,0xFB,0x00,0xC0,
  82. 0xB7,0xBB,0xB7,0xBB,0xB7,0xBB,0xB7,0xBB,0x07,0xB0,0xFF,0xBF,0xFF,0x8F,0xFF,0xFF,/*"电",17*/

  84. 0xFF,0xFF,0xDF,0xFF,0xEF,0xFF,0x73,0xFF,0x58,0xFF,0x5B,0xFF,0x5B,0xFF,0x5B,0xFF,
  85. 0x5B,0xFF,0x5B,0xFF,0x5B,0xFF,0x5B,0xF0,0xDB,0xCF,0xFB,0xBF,0xFB,0x0F,0xFF,0xFF,/*"气",18*/

  87. 0xFF,0xDF,0xFF,0xDF,0xFD,0xDF,0xFD,0xDF,0xFD,0xDF,0xFD,0xDF,0xFD,0xDF,0x01,0xC0,
  88. 0xFD,0xDF,0xFD,0xDF,0xFD,0xDF,0xFD,0xDF,0xFD,0xDF,0xFD,0xDF,0xFF,0xDF,0xFF,0xFF,/*"工",19*/

  90. 0xEF,0xFB,0xED,0xFC,0x2D,0xFF,0x01,0x00,0x6E,0xFF,0xEE,0xBE,0x7F,0xBB,0x40,0xBB,
  91. 0x5E,0xBB,0x5E,0x80,0x5E,0xBB,0x5E,0xBB,0x40,0xBB,0x7F,0xBB,0xFF,0xBF,0xFF,0xFF,/*"程",20*/

  93. 0xFF,0xFF,0xAF,0xFF,0xB0,0xC0,0xB5,0xFE,0xB7,0xFE,0x00,0x00,0xB7,0xDE,0xB7,0x9E,
  94. 0xB7,0xC0,0xFF,0xFF,0x03,0xF0,0xFF,0xBF,0xFF,0x7F,0x00,0x80,0xFF,0xFF,0xFF,0xFF,/*"制",21*/

  96. 0x7F,0xFF,0xBF,0xFF,0xDF,0xFF,0x07,0x00,0xF8,0xFF,0xDD,0xFF,0xE7,0xFF,0xF3,0xFF,
  97. 0x04,0x00,0xB7,0xFB,0xB7,0xFB,0xB7,0xFB,0x97,0xFB,0xB7,0xF9,0xF7,0xFB,0xFF,0xFF,/*"作",22*/

  99. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xA0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
  100. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*"！",23*/




  105. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",0*/

  107. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",1*/

  109. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",2*/

  111. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",3*/

  113. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",4*/

  115. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",5*/

  117. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",4*/

  119. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",5*/

  121. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",5*/

  123. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",4*/

  125. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",5*/

  127. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",5*/

  129. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",5*/

  131. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",4*/

  133. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,/*" ",5*/
  134. };
  135. /*****n（us）延时子程序*****/
  136. void DelayUs(uint N)
  137. {
  138.     uint x ;
  139.     for(x=0;x<=N;x++);
  140. }

  142. /*****主函数*****/
  143. void main(void)
  144. {
  145.     uint i=0,j=0 ;   
  146.     led1=0 ;
  147.     //主程序中只检测按键
  148.     while(1)
  149.     {
  150.         if(KEY==0)
  151.         {
  152.             j++;            
  153.             if(j>580)
  154.             {
  155.                 j=0 ;
  156.             }            
  157.             for(i=j;i<128+j;i++)
  158.             {                              
  159.                 P0=love[i*2];
  160.                 P2=love[i*2+1];
  161.                 DelayUs(60);
  162.                 P0=0XFF;
  163.                 P2=0XFF;
  164.                
  165.             }
  166.         }
  167.     }
  168. }
  169. /*****END*****/
复制代码



作者: 天涯赤子心    时间: 2015-4-5 23:36
棒棒的
作者: 28674500    时间: 2015-4-25 12:37
厉害，求资料
作者: 28674500    时间: 2015-4-25 13:03
求高清原理图，812175465@qq.com
作者: nlztc77    时间: 2015-5-4 22:01
楼主您好,有高清原理图吗，736092685@qq.com
作者: 28674500    时间: 2015-5-7 18:33
nlztc77 发表于 2015-5-4 22:01
楼主您好,有高清原理图吗，

我找到高清原理图了！可是不知道怎么下载程序！交流交流下呗！
作者: 727802492    时间: 2015-6-7 11:36
厉害，求资料
作者: 喔哎呀呀    时间: 2015-6-12 22:49
6666大神啊
作者: 月亮出来喂    时间: 2015-11-27 16:38
求高清原理图605613364@qq.com
作者: 国辉科技    时间: 2015-11-30 13:06
太厉害压
作者: 国辉科技    时间: 2015-11-30 13:06
鱼鱼yy语音
作者: lch2015    时间: 2015-12-8 18:14
底下电源是怎么做的？
作者: ludaijin    时间: 2015-12-26 07:58
帮楼主顶起
作者: 南宫封涯    时间: 2016-2-17 21:34
感觉比其他的简单多了!有资料的话就好了
作者: 聂小生    时间: 2016-2-18 09:46
楼主厉害
作者: 机智如我    时间: 2016-3-8 18:18
好厉害！学习了、
作者: kuangling1995    时间: 2016-3-10 00:09
楼主有高清图吗？更新一下吧
作者: kuangling1995    时间: 2016-3-10 00:09
这东西太好了
作者: 机智如我    时间: 2016-3-12 18:04
求效果图啊！
作者: April7421    时间: 2016-3-28 17:34
求资料！
作者: 826dd    时间: 2016-4-3 11:51
帮楼主顶起
作者: qq82871836    时间: 2016-4-4 11:58
无线供电部分 有什么特殊要求吗？比如222的电容 瓷片电容可以吗，线圈L的绕制  是采用多少线径的漆包线呢，我弄得 无线供电 不能实现，不起振 是咋回事
作者: 越快乐越堕落    时间: 2016-6-26 17:27
原理图有高清的吗
作者: qiyezao    时间: 2016-7-1 13:42
非常棒，求资料
作者: 点点豆豆19    时间: 2016-10-31 11:04
求资料
作者: lhs123    时间: 2016-10-31 13:06
厉害！！！！！！！！！！！！！
作者: realwudongcan    时间: 2016-10-31 14:12
赞！！！最好有效果图看一下。
作者: omikeai    时间: 2017-11-29 09:00

6666大神啊
作者: 练氏    时间: 2017-11-29 10:50
我有问题 ，板子自己做吗？？？因为我自己做的板子太重了
作者: 萌芯一枚    时间: 2018-6-7 01:46
楼主你好，请问你用的是哪种取模软件



欢迎光临 (http://www.51hei.com/bbs/) Powered by Discuz! X3.1