PWM范列—模拟的呼吸灯（有缺陷） -

标题: PWM范列—模拟的呼吸灯（有缺陷） [打印本页]

作者: nius 时间: 2015-4-10 01:49
标题: PWM范列—模拟的呼吸灯（有缺陷）
#include <reg52.h>
sbit PWMOUT = P0^0;
sbit ADDR0 = P1^0;
sbit ADDR1 = P1^1;
sbit ADDR2 = P1^2;
sbit ADDR3 = P1^3;
sbit ENLED = P1^4;
unsigned char HighRH = 0;
unsigned char HighRL = 0;
unsigned char LowRH = 0;
unsigned char LowRL = 0;
void ConfigPWM(unsigned int fr, unsigned char dc);
void ClosePWM();
void main()
{
unsigned int i;

EA = 1;    //开总中断
ENLED = 0;  //使能独立LED
ADDR3 = 1;
ADDR2 = 1;
ADDR1 = 1;
ADDR0 = 0;

while (1)
{
static unsigned char Num1=0;
      ConfigPWM(100, Num1); //频率100Hz，占空比10%
      for (i=0; i<2000; i++);
      ClosePWM();
  Num1++;
  if(Num1==250)
{
Num1=0;
}
}
}
void ConfigPWM(unsigned int fr, unsigned char dc)
{
unsigned long tmp;
unsigned int high, low;
tmp = 11059200/12/fr;
high = (tmp*dc)/100;
low = tmp - high;
high = 65536 - high + 12;
low = 65536 - low + 12;
HighRH = (unsigned char)(high >>8);
HighRL = (unsigned char)high;
LowRH = (unsigned char)(low >> 8);
LowRL = (unsigned char)low;
TMOD &= 0xF0;
TMOD |= 0x01;
TH0 = HighRH;
TL0 = HighRL;
ET0 = 1;
TR0 = 1;
PWMOUT = 1;

}
void ClosePWM()
{
TR0 = 0;
ET0 = 0;
PWMOUT = 1;
}
void InterruptTimer0() interrupt 1
{
if (PWMOUT == 1)  //当前输出为高电平时，装载低电平值并输出低电平
{
      TH0 = LowRH;
      TL0 = LowRL;
      PWMOUT = 0;
}
else             //当前输出为低电平时，装载高电平值并输出高电平
{
      TH0 = HighRH;
      TL0 = HighRL;
      PWMOUT = 1;
}
}

欢迎光临 (http://www.51hei.com/bbs/)