STM32F10x启动文件配置 - - Powered by Discuz!

标题: STM32F10x启动文件配置 [打印本页]

作者: qinqin 时间: 2015-6-9 00:18
标题: STM32F10x启动文件配置
startup_stm32f10x_cl.s互联型的器件，STM32F105xx，STM32F107xxstartup_stm32f10x_hd.s大容量的STM32F101xx，STM32F102xx，STM32F103xxstartup_stm32f10x_hd_vl.s大容量的STM32F100xx（项目中用ST32芯片STM32F100CE）startup_stm32f10x_ld.s小容量的STM32F101xx，STM32F102xx，STM32F103xxstartup_stm32f10x_ld_vl.s小容量的STM32F100xxstartup_stm32f10x_md.s中容量的STM32F101xx，STM32F102xx，STM32F103xxstartup_stm32f10x_md_vl.s中容量的STM32F100xxstartup_stm32f10x_xl.sFLASH在512K到1024K字节的STM32F101xx，STM32F102xx，STM32F103xxcl：互联型产品，stm32f105/107系列vl：超值型产品，stm32f100系列xl：超高密度产品，stm32f101/103系列ld：低密度产品，FLASH小于64Kmd：中等密度产品，FLASH=64 or128hd：高密度产品，FLASH大于128

在KEIL下可以在项目的选项C/C++/PREPROMCESSORsymbols的Define栏里定义，比如STM32F10X_HD_VL

也可以在STM32F10X.H里用宏定义

#if !defined (STM32F10X_LD) && !defined(STM32F10X_LD_VL) && !defined (STM32F10X_MD) &&!defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD)&& !defined (STM32F10X_XL) && !defined(STM32F10X_CL)

#define STM32F10X_HD_VL

#endif

欢迎光临 (http://www.51hei.com/bbs/)