三个通道载波转发板的驱动程序 -

标题: 三个通道载波转发板的驱动程序 [打印本页]

作者: xuwei 时间: 2015-6-13 15:55
标题: 三个通道载波转发板的驱动程序

#include <PL3201_Addr_Map.h>
#include "pl3201.h"
#include "usart.h"
#include "Protocol_layer.h"
#include"app.h"

sbit USART_SEND=P2^2;
extern struct Device_PL3201 xdata *P_Drvier;//PL3201设备指针

extern bit bdata PLC_Rxd_OK;          // 载波接收完成标志
extern  bit bdata PLC_sending;
extern  bit data PLC_TX_EN;

void main ( void )
{

init_PLC3201();
init_pl3201_device();
initsys ();

for(;;)
{
// printf_usart("你好啊！\n");
   Check_sys_plc();

   if ( PLC_Rxd_OK )
   {

   P_Drvier->plc_rx();
   PLC_Rxd_OK=0;

   }

   if ( PLC_TX_EN )
   {

         PLC_TX_EN=0;
printf_usart("Iam from channel C please check me！\r\n");
   USART_SEND=~USART_SEND;

//Post_Messages_to_Distance(1,2,3,"HD0123456789",9) ;


   }



}

#include <PL3201_Addr_Map.h>
#include "pl3201.h"
#include "usart.h"
#include "Protocol_layer.h"
#include"app.h"

  sbit USART_RX=P3^3;
  sbit USART_TX=P2^2;
extern struct Device_PL3201 xdata *P_Drvier;//PL3201设备指针

extern bit bdata PLC_Rxd_OK;          // 载波接收完成标志
extern  bit bdata PLC_sending;
extern  bit data PLC_TX_EN;
extern check_usart();
void main ( void )
{

init_PLC3201();
init_pl3201_device();
initsys ();

for(;;)
{
//    check_usart();
   Check_sys_plc();

   if ( PLC_Rxd_OK )
   {

   P_Drvier->plc_rx();
   PLC_Rxd_OK=0;

   }

  if(RI)
   {
   RI=0;
   USART_RX=~USART_RX;
   SendOneByte(SBUF);

   }

   if ( PLC_TX_EN )
   {
     PLC_TX_EN=0;
   USART_TX=~USART_TX;
printf_usart("I am from channel B,plese check me!\r\n");
//Post_Messages_to_Distance(1,2,3,"HD0123456789",9) ;

   }



}

}

#include <PL3201_Addr_Map.h>
#include "pl3201.h"
#include "usart.h"
#include "Protocol_layer.h"
#include"app.h"

extern struct Device_PL3201 xdata *P_Drvier;//PL3201设备指针

extern bit bdata PLC_Rxd_OK;          // 载波接收完成标志
extern  bit bdata PLC_sending;
extern  bit data PLC_TX_EN;
extern check_usart(void);
extern void SendOneByte1(unsigned char c);
void main ( void )
{
   char a;
init_PLC3201();
init_pl3201_device();
initsys ();
Show_version();

for(;;)
{
   check_usart();
   Check_sys_plc();

   if ( PLC_Rxd_OK )
   {


   P_Drvier->plc_rx();
   PLC_Rxd_OK=0;

   }

/* if(RI)
   {
   a=SBUF;
     RI=0;
   SendOneByte1(a) ;

   } */

   if ( PLC_TX_EN )
   {
   //    printf_usart("74hc595\n");
         PLC_TX_EN=0;
Post_Messages_to_Distance(1,2,3,"HD0123456789",9) ;


   }



}

}

欢迎光临 (http://www.51hei.com/bbs/)