标题: 自己DIY的摇摇棒 [打印本页]
作者: 51hei学习技术中    时间: 2017-3-9 03:02
标题: 自己DIY的摇摇棒


diy资料下载：
51单片机摇摇棒diy.rar (302.99 KB, 下载次数: 27)




空板



示例




最终成型的样子


源程序：
  1. #include<REGX52.H>
  2. #define uchar unsigned char
  3. #define uint  unsigned int

  5. sbit KEY = P3^7;
  6. uchar KY=0,_NO=0;

  8. uchar code display1[]={//我爱你！
  9.     0x20,0x24,0x24,0x24,0xFE,0x23,0x22,0x20,0xFF,0x20,0x22,0xAC,0x20,0x30,0x20,0x00,
  10.     0x40,0xB0,0x92,0x96,0x9A,0x92,0xF2,0x9E,0x92,0x91,0x99,0x95,0x91,0x50,0x30,0x00,
  11.     0x40,0x20,0xF8,0x07,0x40,0x20,0x18,0x0F,0x08,0xC8,0x08,0x08,0x28,0x18,0x00,0x00,
  12.     0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0xFE,0xFE,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,
  13.     0x00,0x08,0x48,0x84,0x7F,0x02,0x21,0x10,0x09,0x06,0x1A,0x61,0x80,0xE0,0x00,0x00,
  14.     0x00,0x00,0x40,0x30,0x8C,0x83,0x46,0x2A,0x12,0x2A,0x26,0x42,0xC0,0x40,0x00,0x00,
  15.     0x00,0x00,0xFF,0x00,0x00,0x08,0x04,0x43,0x80,0x7F,0x00,0x01,0x06,0x0C,0x00,0x00,
  16.     0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x3B,0x3B,0x10,0x00,0x00,0x00,0x00,0x00,0x00,};

  18. uchar code display2[]={//生日快乐
  19.     0x00,0xC0,0x30,0x1E,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0x18,0x10,0x00,0x00,
  20.     0x00,0x00,0x00,0xFE,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0xFF,0x02,0x00,0x00,0x00,
  21.     0x80,0x70,0x00,0xFF,0x10,0x20,0x10,0x10,0xFF,0x10,0x10,0x10,0xF8,0x10,0x00,0x00,
  22.     0x00,0x80,0xC0,0xBC,0x84,0x84,0x84,0xF4,0x82,0x82,0x83,0x82,0x80,0xC0,0x80,0x00,
  23.     0x41,0x40,0x42,0x42,0x42,0x42,0x42,0x7F,0x42,0x42,0x42,0x43,0x42,0x60,0x40,0x00,
  24.     0x00,0x00,0x00,0x7F,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x7F,0x00,0x00,0x00,0x00,
  25.     0x00,0x00,0x00,0xFF,0x82,0x42,0x22,0x1A,0x07,0x0A,0x12,0x22,0x43,0xC2,0x42,0x00,
  26.     0x00,0x40,0x20,0x10,0x0C,0x40,0x80,0x7F,0x00,0x00,0x04,0x08,0x30,0x60,0x00,0x00,};

  28. uchar code display3[]={//我想你了
  29.     0x20,0x24,0x24,0x24,0xFE,0x23,0x22,0x20,0xFF,0x20,0x22,0xAC,0x20,0x30,0x20,0x00,
  30.     0x08,0x88,0x68,0xFF,0x48,0x88,0x08,0xFE,0x52,0x52,0x52,0x52,0xFF,0x02,0x00,0x00,
  31.     0x40,0x20,0xF8,0x07,0x40,0x20,0x18,0x0F,0x08,0xC8,0x08,0x08,0x28,0x18,0x00,0x00,
  32.     0x00,0x02,0x02,0x02,0x02,0x02,0x02,0xE2,0x22,0x12,0x0A,0x06,0x02,0x00,0x00,0x00,
  33.     0x00,0x08,0x48,0x84,0x7F,0x02,0x21,0x10,0x09,0x06,0x1A,0x61,0x80,0xE0,0x00,0x00,
  34.     0x41,0x30,0x00,0x7B,0x80,0x80,0x88,0x93,0xB2,0x82,0x82,0xE2,0x03,0x10,0x60,0x00,
  35.     0x00,0x00,0xFF,0x00,0x00,0x08,0x04,0x43,0x80,0x7F,0x00,0x01,0x06,0x0C,0x00,0x00,
  36.     0x00,0x00,0x00,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};

  38. void delay(uint i)
  39. {
  40.     while(i)
  41.     {
  42.         i--;
  43.     }
  44. }

  46. void desplay1()
  47. {
  48.         uchar i;
  49.         delay(6500);
  50.         for(i=0;i<64;i++)
  51.     {
  52.         P0=~display1[i];
  53.         P2=~display1[i+63];
  54.         delay(150);
  55.     }
  56. }

  58. void desplay2()
  59. {
  60.         uchar i;
  61.         delay(6500);
  62.         for(i=0;i<64;i++)
  63.     {
  64.         P0=~display2[i];
  65.         P2=~display2[i+63];
  66.         delay(150);
  67.     }
  68. }

  70. void desplay3()
  71. {
  72.         uchar i;
  73.         delay(6500);
  74.         for(i=0;i<64;i++)
  75.     {
  76.         P0=~display3[i];
  77.         P2=~display3[i+63];
  78.         delay(150);
  79.     }
  80. }

  82. void main()
  83. {
  84.     IT0=1;
  85.     EX0=1;
  86.     EA=1;
  87.    
  88.     KEY=1;
  89.    
  90.     while(1)
  91.     {
  92.         if(KEY==0)
  93.         {
  94.             delay(200);
  95.             if(KEY==0)
  96.             {
  97.                 _NO++;
  98.                 if(_NO>2)
  99.                 _NO=0;
  100.                 while(!KEY);
  101.             }
  102.         }
  103.     }   
  104. }

  106. void inttime() interrupt 0
  107. {
  108.     KY=~KY;
  109.     if(KY==0)
  110.     {
  111.         switch(_NO)
  112.         {
  113.             case 0:
  114.             desplay1();
  115.             break;
  116.             
  117.             case 1:
  118.             desplay2();
  119.             break;
  120.      
  121.             case 2:
  122.             desplay3();
  123.             break;
  124.         }   
  125.     }
  126. }
复制代码


作者: YE小白    时间: 2017-4-19 01:07
你好我想问一下，摇摇棒要怎么烧程序进去啊
作者: dzbj    时间: 2017-4-19 10:42
我去 这个厉害啊 我少见多怪了 不过真心觉得很牛啊



欢迎光临 (http://www.51hei.com/bbs/) Powered by Discuz! X3.1