标题: 我制作的led胸牌 含原理图 源代码及proteus仿真 [打印本页]

---

作者: songshilong    时间: 2017-5-12 16:10
标题: 我制作的led胸牌 含原理图 源代码及proteus仿真
程序简单，适合初学者，内附原理图代码等，用proteus8制作，用16*16点阵显示汉字。

proteus8仿真原理图：



单片机源程序如下:

1. #include<reg51.h>
   
2. #include<stdlib.h>
   
3. #define  uchar unsigned char
   
4. #define  uint unsigned int
   
5. uchar code col[]={0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15};//列控制数组
   
6. uchar code row[][32]={                                                           //字模
   
7. 
   
8. {0x40,0x00,0x80,0x00,0xFE,0x7F,0x02,0x40,0x81,0x20,0x80,0x00,0x80,0x00,0xFE,0x3F,
   
9. 0xC0,0x01,0xA0,0x02,0x90,0x04,0x88,0x08,0x84,0x10,0x83,0x60,0x80,0x00,0x80,0x00},/*"宋",0*/
   
10. 
    
11. {0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0xFF,0x7F,0x80,0x00,
    
12. 0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0xFC,0x1F,0x00,0x00},/*"士",0*/      
    
13. 
    
14. {0x20,0x04,0x20,0x08,0x20,0x08,0x20,0x00,0xFF,0x7F,0x20,0x01,0x20,0x11,0x20,0x11,
    
15. 0x20,0x09,0x10,0x05,0x10,0x03,0x08,0x41,0x88,0x41,0x44,0x41,0x22,0x7E,0x01,0x00},/*"龙",0*/
    
16. 
    
17. {0x20,0x00,0x70,0x00,0x1E,0x00,0x10,0x3E,0x10,0x22,0xFF,0x22,0x10,0x22,0x18,0x22,
    
18. 0x38,0x22,0x54,0x22,0x54,0x22,0x12,0x22,0x11,0x3E,0x10,0x22,0x10,0x00,0x10,0x00},/*"和",0*/
    
19. 
    
20. {0x08,0x00,0x10,0x3E,0xFF,0x22,0x00,0x12,0x7E,0x12,0x42,0x0A,0x7E,0x12,0x00,0x12,
    
21. 0x7E,0x22,0x20,0x22,0x10,0x22,0xF0,0x16,0x1F,0x0A,0x10,0x02,0x14,0x02,0x08,0x02},/*"郭",0*/
    
22. 
    
23. {0x08,0x02,0x08,0x02,0xFC,0x7E,0x14,0x09,0xA2,0x10,0x01,0x0F,0xFC,0x00,0x80,0x00,
    
24. 0x80,0x00,0xFF,0x7F,0x80,0x00,0x40,0x01,0x20,0x02,0x10,0x04,0x0C,0x18,0x03,0x60},/*"笑",0*/
    
25. 
    
26. {0x08,0x02,0x08,0x02,0xFC,0x7E,0x14,0x09,0xA2,0x10,0x01,0x0F,0xFC,0x00,0x80,0x00,
    
27. 0x80,0x00,0xFF,0x7F,0x80,0x00,0x40,0x01,0x20,0x02,0x10,0x04,0x0C,0x18,0x03,0x60},/*"笑",0*/
    
28. 
    
29. {0x20,0x20,0x24,0x20,0x24,0x20,0xFC,0x25,0x22,0x24,0x20,0x24,0xFF,0x27,0x20,0x24,
    
30. 0x20,0x24,0xFC,0x25,0x24,0x25,0x24,0x25,0x64,0x21,0xA4,0x20,0x20,0x28,0x20,0x10},/*"制",0*/
    
31. 
    
32. {0x90,0x00,0x90,0x00,0x90,0x00,0x88,0x7F,0x48,0x01,0x4C,0x01,0x2C,0x01,0x0A,0x1F,
    
33. 0x09,0x01,0x08,0x01,0x08,0x01,0x08,0x3F,0x08,0x01,0x08,0x01,0x08,0x01,0x08,0x01},/*"作",0*/
    
34. 
    
35. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    
36. 0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x00,0x0C,0x00,0x08,0x00,0x04,0x00,0x00,0x00},/*"，",0*/
    
37. 
    
38. {0x80,0x10,0x42,0x10,0xE4,0x11,0x24,0x11,0xE0,0x7D,0x20,0x11,0xE7,0x11,0x24,0x13,
    
39. 0x24,0x15,0xF4,0x15,0x84,0x11,0x54,0x11,0x2C,0x11,0x14,0x11,0x40,0x15,0x80,0x08},/*"谢",0*/
    
40. 
    
41. {0x80,0x10,0x42,0x10,0xE4,0x11,0x24,0x11,0xE0,0x7D,0x20,0x11,0xE7,0x11,0x24,0x13,
    
42. 0x24,0x15,0xF4,0x15,0x84,0x11,0x54,0x11,0x2C,0x11,0x14,0x11,0x40,0x15,0x80,0x08},/*"谢",0*/
    
43. 
    
44. {0x00,0x00,0x80,0x3F,0x80,0x20,0xBF,0x20,0xA0,0x24,0xA0,0x24,0x92,0x24,0x94,0x24,
    
45. 0x88,0x24,0x88,0x2A,0x14,0x0A,0x24,0x09,0x22,0x09,0x81,0x48,0x40,0x48,0x20,0x70},/*"观",0*/
    
46. 
    
47. {0x00,0x1F,0xFE,0x00,0x80,0x00,0xFC,0x1F,0x40,0x00,0xFF,0x7F,0x20,0x00,0x10,0x00 ,
    
48. 0xF8,0x0F,0x14,0x08,0xF2,0x0F,0x11,0x08,0xF0,0x0F,0x10,0x08,0xF0,0x0F,0x10,0x08},/*"看",0*/
    
49. 
    
50. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    
51. 0x00,0x00,0x00,0x00,0x18,0x00,0x24,0x00,0x24,0x00,0x18,0x00,0x00,0x00,0x00,0x00},/*"。",0*/
    
52. };
    
53.          
    
54. void delayms(uint t) //延时函数                          
    
55. {
    
56.      uint x,y;
    
57.      for(x=t;x>0;x--)
    
58.          for(y=124;y>0;y--);
    
59. }                                                
    
60. 
    
61. void display(uint n) //显示函数         
    
62. {
    
63.      uint i,j;
    
64.      for(j=0;j<12;j++)   
    
65.      for(i=0;i<16;i++)
    
66.          {
    
67.                          P2=col[i];               
    
68.              P0=row[n][2*i];
    
69.              P1=row[n][2*i+1];
    
70.              delayms(3);                                   
    
71.          }                                   
    
72. }                        
    
73. 
    
74. void main() //主函数
    
75. {
    
76. P3=0;
    
77. while(1)         
    
78. {
    
79.         P3=0;if(P3!=0){display(0);delayms(50);}else   break;  
    
80.         P3=0;if(P3!=0){display(1);delayms(50);}else   break;
    
81.         P3=0;if(P3!=0){display(2);delayms(50);}else   break;
    
82.         P3=0;if(P3!=0){display(3);delayms(50);}else   break;
    
83.         P3=0;if(P3!=0){display(4);delayms(50);}else   break;
    
84.         P3=0;if(P3!=0){display(5);delayms(50);}else   break;
    
85.         P3=0;if(P3!=0){display(6);delayms(50);}else   break;
    
86. ……………………
    
87. 
    
88. …………限于本文篇幅 余下代码请从51黑下载附件…………
    

复制代码

所有资料51hei提供下载:
led胸牌.rar (22.27 KB, 下载次数: 78)

2017-5-12 16:10 上传

点击文件名下载附件
下载积分: 黑币 -5

---

作者: 最爱Pcy    时间: 2020-11-10 09:48
好东西！这个可以改一下里面的字吗？谢谢，看到请回复一下

---

作者: cly0806    时间: 2020-11-10 11:15

最爱Pcy 发表于 2020-11-10 09:48
好东西！这个可以改一下里面的字吗？谢谢，看到请回复一下

这个可以的，把你想要的字转换成字模，然后添加进去就好了

---

作者: 哈哈哈这是一个    时间: 2021-3-17 11:17
这仿真需要用Proteus8.8才能打开.

51hei.png (29.24 KB, 下载次数: 29)

下载附件

2021-6-22 17:30 上传

---

作者: wwh2382    时间: 2021-3-20 16:56
练手是可以，不过xb上的同类产品真的很便宜，5块钱就能买到，还包邮

---

作者: abslearn    时间: 2021-3-22 09:29
这个学习不错··TB不过产品都挺多，而且价格很便宜··

---

作者: heikeji2021    时间: 2021-6-22 15:24
仿真怎么才能工作起来？

---

作者: heikeji2021    时间: 2021-6-25 17:39
如何向左移动起来

---

欢迎光临 (http://www.51hei.com/bbs/)

Powered by Discuz! X3.1