ADC0832的proteus仿真与单片机程序 LCD1602显示 -

#include <reg52.h>
#include<intrins.h>
#include<math.h>
/**********************************8/
/**********LCD1602接口程序**********/
#define DD P2
sbit Rs=P3^0;
sbit Rw=P3^1;
sbit E=P3^2;
sbit busy_p=ACC^7;
/********************************/
void delay_1ms(unsigned char i) //最小延时1ms
{ unsigned char j;
while(i--)
for(j=0;j<125; j++);
}
void delay_10ns(unsigned char i) //最小延时10ns
{ unsigned char j;
while(i--)
for(j=0;j<10; j++);
}
void write_com(unsigned char com,bit p) //写指令
{if(p)
delay_10ns(5);
E=0;
Rs=0;
Rw=0;
DD=com;
delay_10ns(50); //>40ns
E=1;
delay_1ms(2); //>150ns
E=0;
delay_10ns(4); //>25+10ns
}
void write_date(unsigned char DATA) //写数据
{
delay_10ns(50);
E=0;
Rs=1;
Rw=0;
DD=DATA;
delay_10ns(50);
E=1;
delay_10ns(50);
E=0;
delay_10ns(4);
}
void addr_x_y(unsigned char x,bit y) //写坐标，定位置
{ unsigned char temp=0x80;
if(y)
{temp|=0x40;}
temp|=x;
write_com(temp,0);
}
void desplay_char(unsigned char x,bit y,unsigned char p)
//在指定位置显示一个字符。
{ addr_x_y(x,y);
write_date(p);
}
void init(void)
{delay_1ms(15);
write_com(0x38,0);
delay_1ms(5);
write_com(0x38,0);
delay_1ms(5);
write_com(0x38,0);
delay_1ms(5);
write_com(0x38,1);
write_com(0x08,1);
write_com(0x01,1);
write_com(0x06,1);
write_com(0x0c,1);
}
void xs_int(unsigned int shuju,bit t) //显示一个数字
{unsigned char huancun[6]={0};
unsigned char biaozhi=0,i;
if (shuju < 10) biaozhi = 1;
else if(shuju < 100) biaozhi = 2;
else if(shuju < 1000) biaozhi = 3;
else if(shuju < 10000) biaozhi = 4;
else if(shuju < 65535) biaozhi = 5;
switch(biaozhi)
{case 5:huancun[5] = shuju/10000;
case 4:huancun[3] = shuju%10000/1000;
case 3:huancun[2] = shuju%1000/100;
case 2:huancun[1] = shuju%100/10;
case 1:huancun[0] = shuju%10;
break;
default:break;
}
for(i=6;i>1;i--)
{if(i==5)desplay_char(10,1,'.');
else desplay_char(15-i,t,0x30+huancun[i-1]); }
desplay_char(15,t,'V');
}
/************************************************************/
/**********ADC0832接口程序************************************/
sbit ADC_CS =P3^4;
sbit ADC_CLK=P3^5;
sbit ADC_DO =P3^6;
sbit ADC_DI =P3^7;
/*******************************************************************/
void Delay(unsigned char j)
{
unsigned char i;
for(i=0;i<j;i++); //延时，脉冲一位持续的时间
}
unsigned char ADC0832(void) //把模拟电压值转换成8位二进制数并返回
{
unsigned char i,data_c;
data_c=0;
ADC_CS=0;
ADC_DO=0;//片选，DO为高阻态
for(i=0;i<10;i++)
{;}
ADC_CLK=0;
Delay(2);
ADC_DI=1;
ADC_CLK=1;
Delay(2); //第一个脉冲，起始位
ADC_CLK=0;
Delay(2);
ADC_DI=1;
ADC_CLK=1;
Delay(2); //第二个脉冲，DI=1表示双通道单极性输入
ADC_CLK=0;
Delay(2);
ADC_DI=1;
ADC_CLK=1;
Delay(2); //第三个脉冲，DI=1表示选择通道1（CH2）
ADC_DI=0;
ADC_DO=1;//DI转为高阻态，DO脱离高阻态为输出数据作准备
ADC_CLK=1;
Delay(2);
ADC_CLK=0;
Delay(2);//经实验，这里加一个脉冲AD便能正确读出数据，
//不加的话读出的数据少一位（最低位d0读不出）
for (i=0; i<8; i++)
{
ADC_CLK=1;
Delay(2);
……………………
…………限于本文篇幅余下代码请从51黑下载附件…………

复制代码