标题: K20_Lab_Board_V4.2综合测试程序 [打印本页]
作者: x456852753159x    时间: 2017-5-15 20:41
标题: K20_Lab_Board_V4.2综合测试程序
k20综合测试程序





源程序：
  1. /*
  2. * main implementation: use this 'C' sample to create your own application
  3. *
  4. */


  7. #include "derivative.h" /* include peripheral declarations */
  8. #include "System.h" /* include peripheral declarations */
  9. #include "ADC.h" /* include peripheral declarations */
  10. #include "UART0.h" /* include peripheral declarations */
  11. #include "Beep.h" /* include peripheral declarations */
  12. //#include "LED.h"  /*LED configure*/
  13. #include "MMA8451Q.h"/*MMA8451Q */
  14. #include "PIT.h"

  16. unsigned int ADC_Result;
  17. unsigned char MMA8451_XYZ_CFG;

  19. unsigned char MMA8451_X_MSB,MMA8451_X_LSB;
  20. unsigned char MMA8451_Y_MSB,MMA8451_Y_LSB;
  21. unsigned char MMA8451_Z_MSB,MMA8451_Z_LSB;

  23. unsigned int temperature_value,photo_value,ADC_value;

  25. unsigned char show[6];
  26. extern unsigned char flag_measure;

  28. int main(void)
  29. {
  30.         LED_Init();       
  31.         KEY_Init();
  32.         SMG_Init();
  33.         Beep_Init();
  34.         ADC_Init();
  35.         UART0_Init();
  36.         FTM2_Init();
  37.         PIT_init(0x01);  //1ms interval interrupt
  38.         MMA8451_Init();  //initial MMA8451 g sensor
  39.         EN_Init();
  40.        
  41.         for(;;)
  42.         {          
  43.                 //potentiometer control  beep
  44.                 ADC_channel_potentiometer();
  45.                 ADC_value=ADC1_TR_DATA();
  46.                 Beep_setup(ADC_value);
  47.                 if(flag_measure==1)
  48.                 {
  49.                         flag_measure=0;
  50.                     //temperature sensor
  51.                     ADC_channel_temperature();
  52.                     delayms(0x01);
  53.                     temperature_value=ADC1_TR_DATA();
  54.                    
  55.                     photo_value=ADC0_TR_DATA();
  56.                
  57.                     //SMG show data store
  58.                     data_to_array(temperature_value,photo_value,show);
  59.                 }               
  60.         }
  61.        
  62.         return 0;
  63. }
复制代码

全部资料下载地址（附带串口工具）：
K20_Lab_Board_V4.2.zip (3.34 MB, 下载次数: 6)






欢迎光临 (http://www.51hei.com/bbs/) Powered by Discuz! X3.1