ws2812b彩灯带室内自动系统单片机源程序 -

/*********************************************************************************************************
*********************************************************************************************************/
#include<STC12C5A60S2.h>
//#include<LCD1602.h>
#include<PWM.h>
#include<ADC.h>
#include<intrins.h>
#define uchar unsigned char
#define uint unsigned int
#define FSCLK 11059200
#define Number 29
unsigned char Receive,i;
unsigned int n,flag;
unsigned char Receive_table[15];
#define RELOAD_COUNT 0xFA
sbit LED0=P0^2;
sbit DAI = P3^2;
sbit k1=P2^0;
sbit k2=P2^1;
sbit k3=P2^2;
sbit k4=P2^3;
sbit k5=P2^4;
sbit k6=P2^5;
sbit k7=P2^6;
sbit k8=P2^7;
sbit p13=P1^3;
uint speed = 0;
uchar flag_clr = 0;
uchar Table_R[8]={ 0, 0,255, 0,255,255,255,0};
uchar Table_G[8]={255, 0, 0,255, 0,255,255,0};
uchar Table_B[8]={ 0,255, 0,255,255, 0,255,0};
uchar code Table[256] = {
0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,
20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,
40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,
60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,
80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,
100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,
120,121,122,123,124,125,126,127,128,129,130,131,132,133,134,135,136,137,138,139,
140,141,142,143,144,145,146,147,148,149,150,151,152,153,154,155,156,157,158,159,
160,161,162,163,164,165,166,167,168,169,170,171,172,173,174,175,176,177,178,179,
180,181,182,183,184,185,186,187,188,189,190,191,192,193,194,195,196,197,198,199,
200,201,202,203,204,205,206,207,208,209,210,211,212,213,214,215,216,217,218,219,
220,221,222,223,224,225,226,227,228,229,230,231,232,233,234,235,236,237,238,239,
240,241,242,243,244,245,246,247,248,249,250,251,252,253,254,255
};
unsigned char CCAPOH,ID;
float res0,res1;
/*********************************************************************************************************
** 函数功能：延时函数
** 函数说明：利用软件延时，占用CPU，经调试最小单位大约为1ms
** 入口参数：time:需要延时的时间，单位ms
** 出口参数：无
*********************************************************************************************************/
void Delay_ms(uint time)
{
uint i,j;
for(i = 0;i < time;i ++)
for(j = 0;j < 930;j ++);
}
void ms_delay(unsigned int t)
{
unsigned int i,j;
for(i=t;i>0;i--)
for(j=110;j>0;j--);
}
void us_delay(unsigned int t)
{
while(t--);
}
void rst()
{
uint s;
DAI=0;
for(s=0;s<1000;s++);
{_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();}
}
void Delay_Fash (uint x) // 1ms Delay
{
uint t;
t = 0;
while (x--)
{
for (t = 0; t < 5000; t++);
}
}
void Delay(uint x) // 1ms Delay
{
uint t;
t = 0;
while (x--)
{
for (t = 0; t < 330; t++);
}
}
/*uart初始化*/
void Uart_Init()//使用独立的波特率发生器（STC12C560S2或带有独立波特率发生器//、//的单片机均可）
{
SCON=0x50; //设置为串行口以方式1工作，8位异步通讯,允许接收中断。
PCON=0x80; //SMOD波特率选择位为1，SMOD=1.
BRT=0xfa;//波特率9600 256-晶振频率/波特率x16=BRT
AUXR=0x11; //T0、T1不12分频，速度是89C51的12倍，启动独立波特率//发生器，每个时钟计数一次
//设置串口1的波特率发生器为独立波特率发生器,
// AUXR1=0x80; //切换到P1口
ES=1; //开启串口中断
EA=1; //开启总中断
}
void Send_Uart(unsigned char value){//向WIFI模块发送数据
ES=0;
TI=0;
SBUF=value;//发送完后TI变1
while(!TI);
TI=0;
ES=1;
}
/*给esp8266发送指令*/
void ESP8266_Set(unsigned char *puf)
{
while(*puf){
Send_Uart(*puf);
us_delay(5);
puf++;
}
us_delay(5);
Send_Uart('\r');
us_delay(5);
Send_Uart('\n');
ms_delay(20000);
}
void code0()
{
DAI=1;
_nop_();
DAI=0;
_nop_(); _nop_();_nop_();_nop_();
_nop_();_nop_();_nop_();_nop_();
_nop_();_nop_();_nop_();_nop_();
}
void code1()
{
DAI=1;
_nop_(); _nop_();_nop_();_nop_();
_nop_();_nop_();_nop_();_nop_();
_nop_();_nop_();_nop_();_nop_();
DAI=0;
_nop_();_nop_(); _nop_(); _nop_();
}
//打开灯
void bright()
{ unsigned int j;
for(j=0;j<720;j++)code1();
}
//关闭灯函数
void dark()
{ unsigned int j;
for(j=0;j<720;j++)code0();
}
void send_2811_24bits(uchar dat1,uchar dat2,uchar dat3)
{
uchar a;
// uchar b;
for(a=0;a<8;a++) //dat1
{
if(dat1&0x80)
{
code1();
}
else
{
code0();
}
dat1=dat1<<1;
}
for(a=0;a<8;a++) //dat2
{
if(dat2&0x80)
{
code1();
}
else
{
code0();
}
dat2=dat2<<1;
}
for(a=0;a<8;a++) //dat3
{
if(dat3&0x80)
{
code1();
}
else
{
code0();
}
dat3=dat3<<1;
}
}
void Jump()
{
uint i;
uchar Colour = 0; //这个参数值域：0~7
uchar Count = 0; //跳变次数 //这个参数值域：0~1
speed = 150;
while(1)
{ if(k5==0)
{
Delay_ms(5);
if(k5==0)
{
return;
ID=0;
}
}
for(i=0;i<50;i++) //Number = 50
{
send_2811_24bits(Table_R[Colour],Table_G[Colour],Table_B[Colour]);
}
rst();
Delay(speed);
Colour++;
if(Colour>=7)
{
Colour = 0;
Count++;
if(Count>1)
{
Count = 0;
return;
}
}
}
}
void Flow()
{
uint i,Stack;
uchar Colour1,Colour2;
Stack = 0;
Colour1 = 0;
Colour2 = 6;
speed=5; //17
while(1)
{ if(k5==0)
{
Delay_ms(5);
if(k5==0)
{
return;
ID=0;
}
}
for(i=0;i<Number;i++)
{
if(i<Stack)
{
send_2811_24bits(Table_R[Colour1],Table_G[Colour1],Table_B[Colour1]);
}
else
{
send_2811_24bits(Table_R[Colour2],Table_G[Colour2],Table_B[Colour2]);
}
}
rst();
Delay_Fash(speed);
Stack++;
if(Stack>Number)
{
Stack = 1;
Colour2 = Colour1;
Colour1++;
if(Colour1>6)
{
return;
}
}
}
}
void Pass()
{
int i,Stack,Stack_Buf;
uchar Pass_Sec;
char Colour,Colour_Buf;
uchar TIMES=0;
Pass_Sec = 12;
Colour_Buf = 0;
Stack_Buf = 0;
speed = 5;
while(1)
{ if(k5==0)
{
Delay_ms(5);
if(k5==0)
{
return;
ID=0;
}
}
Stack = Stack_Buf;
Colour = Colour_Buf;
for(i=0;i<Number;i++)
{
send_2811_24bits(Table_R[Colour],Table_G[Colour],Table_B[Colour]);
Stack++;
if(Stack > Pass_Sec)
{
Stack = 0;
Colour++;
if(Colour>6)
{
Colour=0;
}
}
}
rst();
Delay_Fash(speed);
Stack_Buf--;
{
if(Stack_Buf<0)
{
Stack_Buf = Pass_Sec;
Colour_Buf--;
if(Colour_Buf<0)
{
Colour_Buf = 6;
}
if(Colour_Buf==0)
{
TIMES++;
if(TIMES>1)
{
return;
}
}
}
}
}
}
void Case()
{
int i,Stack,Stack_Buf,TIMES;
uchar Pass_Sec;
char Colour,Colour_Buf;
TIMES=0;
Pass_Sec=7;
Colour_Buf=0;
Stack_Buf=0;
speed=10;
while(1)
{
if(k5==0)
{
Delay_ms(5);
if(k5==0)
{
return;
ID=0;
}
}
Stack=Stack_Buf;
Colour=Colour_Buf;
for(i=0;i<Number;i++)
{
if(Stack<4)
{
send_2811_24bits(Table_R[Colour],Table_G[Colour],Table_B[Colour]);
}
else
{
send_2811_24bits(255,255,255);
}
Stack++;
if(Stack>Pass_Sec)
{
Stack=0;
}
}
rst();
Delay_Fash(speed);
Stack_Buf--;
{
if(Stack_Buf<0)
{
Stack_Buf=Pass_Sec;
}
}
TIMES++;
if(TIMES>120)
{
TIMES=0;
Colour_Buf++;
if(Colour_Buf>5)
{
return;
}
}
}
}
void adchange()
{
res0=GetADCResult(ADC_CH0);
CCAP0H =256-ADC_RES;
res1=GetADCResult(ADC_CH1);
}
void key()
{
if(CCAP0H<255)
{
if(k1==0)
{
Delay_ms(5);
if(k1==0)
{
CCAP0H++;
}
}
}
if( CCAP0H>0)
{
if(k2==0)
{
Delay_ms(5);
if(k2==0)
{
CCAP0H--;
}
}
}
}
void changecolour1()
{unsigned char i;
rst();
for(i=0;i<30;i++)
{
if(k5==0)
{
Delay_ms(5);
if(k5==0)
{
return;
ID=0;
}
}
send_2811_24bits(0,255,0);
}
}
void changecolour2()
{unsigned char i;
rst();
for(i=0;i<30;i++)
{
if(k5==0)
{
Delay_ms(5);
if(k5==0)
{
return;
ID=0;
}
}
send_2811_24bits(0,0,255);
}
}
void changecolour3()
{unsigned char i;
rst();
for(i=0;i<30;i++)
{
if(k5==0)
{
Delay_ms(5);
if(k5==0)
{
return;
ID=0;
}
}
send_2811_24bits(255,0,0);
}
}
void shouji()
{
if(Receive=='0')
{
ID=6;
CCAP0H=30;
}
if(Receive=='1')
{
ID=6;
CCAP0H=60;
}
if(Receive=='2')
{
ID=6;
CCAP0H=90;
}
if(Receive=='3')
{
ID=6;
CCAP0H=120;
}
if(Receive=='4')
{
ID=6;
CCAP0H=150;
}
if(Receive=='5')
{
ID=6;
CCAP0H=180;
}
if(Receive=='6')
{
ID=6;
CCAP0H=210;
}
if(Receive=='7')
{
ID=6;
CCAP0H=254;
}
if(Receive=='d')
{
ID=6;
CCAP0H=0;
}
}
void main()
{
CCAP0H=254;
ID=0;
TMOD|=0X10;
TH1=0XFC; //给定时器赋初值，定时1ms
TL1=0X18;
EA=1;
TR1=1;
ET1=1;
Uart_Init();
PCA_init();
Timer0_init();
ADC_Init(ADC_PORT0 | ADC_PORT1); //配置通道P1^0 ,P1^1 为AD采集口，如要配置其他其他口，直接用或运算加进初始化函数中
ESP8266_Set("AT+CWMODE=3");//选择wifi应用模式，此时为STA模式
ms_delay(3000);
// ESP8266_Set("AT+RST");
ESP8266_Set("AT+CWJAP=\"WIFI\",\"12345678\"");//连接网络
ms_delay(15000);
ESP8266_Set("AT+CIPMUX=0");//设置单连接模式，透传只能在单连接模式下进行
ms_delay(5000);
ESP8266_Set("AT+CIPMODE=1");//设置透传模式
ms_delay(5000);
ESP8266_Set("AT+CIPSTART=\"TCP\",\"10.50.84.160\",8080");//连接到服务器
while(1)
{
shouji();
switch(ID)
{
case(0):bright();key();break;
case(1):bright();adchange();break;
case(2):Flow();Case();Pass();Jump();break;
case(3):changecolour1();break;
case(4):changecolour2();break;
case(5):changecolour3();break;
case(6):bright();break;
}
}
}
void timer1() interrupt 3
{
if(k3==0)
{
Delay_ms(5);
if(k3==0)
{
ID=1;
}
……………………
…………限于本文篇幅余下代码请从51黑下载附件…………

复制代码