标题: RC522飞利浦原厂代码下载 [打印本页]
作者: zhalun108    时间: 2017-7-14 10:36
标题: RC522飞利浦原厂代码下载
RC522飞利浦原厂代码 提供给有需要的朋友下载



单片机源程序如下:
  1. #include <string.h>
  2. #include <stdio.h>
  3. #include <absacc.h>
  4. #include <intrins.h>

  6. #include "RegCtrl.h"
  7. #include "reg52.h"
  8. #include "main.h"
  9. #include "Mifare.h"
  10. #include "Rc522Reg.h"
  11. #include "OpCtrl.h"

  13. /*Initialize the processor and RC522*/
  14. void SysInit(void)
  15. {
  16.         T2CON = 0x04;
  17.     PCON = 0x80;
  18.     SCON = 0x70;
  19.     TMOD = 0x22;
  20.         TH1   = BAUD_9600;  //set serial port baudrate to 9600bps
  21.         TL1   = TH1;
  22.         TR1   = 1;
  23.         EA=0;           //disable all interrupt
  24.         Rc522Init();
  25. }

  27. //Just for test
  28. void main(void)
  29. {
  30.     short status;
  31.     unsigned char idata tmp[16],i,key[6];
  32.     SysInit();
  33.     memset(key,0xff,6);

  35.     /* Request */
  36.     status = Request(ISO14443_3_REQALL, tmp);
  37.     if(status)
  38.       goto end;

  40.     /*anticollision and select the card*/
  41.     status = AnticollSelect(0, tmp);
  42.     if(status)
  43.       goto end;

  45.     /*authenticaiton the key A of sector 1 (block 4~block 7)*/
  46.     status = Authentication(MIFARE_AUTHENT_A,key, tmp, 6);
  47.     if(status)
  48.       goto end;

  50.     /*if passed authenticaiton you can read the data in this sector*/
  51.     status = Read(6, tmp);
  52.     if(status)
  53.       goto end;
  54.     memset(tmp,0x33,16);

  56.     /*write function test*/
  57.     status = Write(6, tmp);
  58.     if(status)
  59.       goto end;
  60.     memset(tmp,0,16);

  62.     /*to check if the data has been writen successfully*/
  63.     status = Read(6, tmp);
  64.     if(status)
  65.       goto end;

  67.     /*Initialize a block value, then you can do increment and decrement operation*/
  68.     memset(tmp,0xff,4);
  69.     status = InitBlock(6,tmp);
  70.     if(status)
  71.       goto end;

  73.     /*to check if the data has been initialized successfully*/
  74.     status = Read(6, tmp);
  75.     if(status)
  76.       goto end;

  78.     /*decrement operation test*/
  79.     tmp[0]=2;
  80.     tmp[1]=0;
  81.     tmp[2]=0;
  82.     tmp[3]=0;
  83.     status = ValueOper(MIFARE_DECREMENT, 6, tmp, 6);
  84.     if(status)
  85.       goto end;

  87.     /*check if the decrement operation is ok*/
  88.     status = Read(6, tmp);
  89.     if(status)
  90.       goto end;

  92.     /*Increment operation test*/
  93.     tmp[0]=2;
  94. ……………………

  96. …………限于本文篇幅 余下代码请从51黑下载附件…………
复制代码

所有资料51hei提供下载:
RC522飞利浦原厂代码.zip (23.25 KB, 下载次数: 29)








欢迎光临 (http://www.51hei.com/bbs/) Powered by Discuz! X3.1