标题: 自己的16x16点阵制作,采用的4个74hc573图纸与单片机源程序分享 [打印本页]

---

作者: 莫笑丶良    时间: 2017-11-8 16:32
标题: 自己的16x16点阵制作,采用的4个74hc573图纸与单片机源程序分享
                       图中三极管于电阻没有用到，
                       c文件里面有教程；

                       hex也有；连线放式；

下面是图纸：


制作出来的实物图：


单片机源程序如下:

1. /***采用四个74hc573，***/
   
2. #include<reg52.h>
   
3. sbit sao=P2^3; //573使能端前8位，行扫描
   
4. sbit sao1=P2^2; //573使能端后8位，行扫描
   
5. sbit su=P2^1;  //573使能端前8位，列数据传送
   
6. sbit su1=P2^0;        //573使能端后8位，列数据传送
   
7. unsigned char a,b,c;
   
8. unsigned char code tbo[]={
   
9. 0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,
   
10. 0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80
    
11. };//扫描数据，根据连线更改
    
12. unsigned char code tbo1[30][32]={
    
13. {0xFE,0xFE,0x00,0xFE,0xFE,0x80,0x93,0x99,
    
14. 0x90,0x9E,0x9E,0x80,0x9E,0x9E,0x9E,0x9F,
    
15. 0x7F,0x7F,0x00,0x7F,0x7F,0x01,0xC9,0x99,
    
16. 0x09,0x79,0x79,0x01,0x79,0x79,0x61,0xF3},/*"南",0*/
    
17. 
    
18. {0xFC,0xFE,0x00,0xF9,0xF9,0xF3,0xE7,0xC0,
    
19. 0xF9,0xF9,0xF9,0xF9,0xF3,0xF3,0xE7,0x8F,
    
20. 0xFF,0x7F,0x00,0xFF,0xFF,0xCF,0xE7,0x03,
    
21. 0x93,0x9F,0x9F,0x9F,0x99,0x99,0x99,0xC1},/*"充",1*/
    
22. 
    
23. {0xFE,0x02,0xF2,0xF2,0xF2,0x82,0x9E,0x98,
    
24. 0x9E,0x82,0xF2,0xF2,0xF2,0xF2,0x86,0xCE,
    
25. 0x7F,0x73,0x73,0x67,0x4F,0x1F,0x7F,0x00,
    
26. 0x1F,0x4F,0x4F,0x67,0x73,0x19,0x3C,0x7F},/*"张",2*/
    
27. 
    
28. {0xFC,0xCE,0xE0,0xE1,0x38,0x99,0x98,0xE0,
    
29. 0xE0,0xC8,0x08,0xC8,0xC9,0xC8,0xC9,0xF9,
    
30. 0xFF,0x01,0x79,0x99,0x01,0x99,0x01,0x01,
    
31. 0x01,0x01,0x01,0x01,0x09,0x01,0x99,0x91},/*"澜",3*/
    
32. 
    
33. {0xE7,0xE7,0xE7,0xE4,0x01,0xE7,0xE7,0xE0,
    
34. 0xE3,0xC7,0x07,0xE7,0xE7,0xE7,0x86,0xC8,
    
35. 0xCF,0xCF,0xCF,0x00,0xCF,0xCF,0xCF,0x01,
    
36. 0x39,0x33,0x93,0x87,0xCF,0x87,0x33,0xF8},/*"技",4*/
    
37. 
    
38. {0xF3,0xF0,0x93,0x93,0x93,0x92,0x92,0x92,
    
39. 0x92,0x92,0x92,0xF2,0xE6,0xE7,0xCF,0x9F,
    
40. 0xFF,0x00,0xCF,0xCF,0xCF,0x01,0x49,0x49,
    
41. 0x49,0x49,0x49,0x41,0x43,0xCF,0xCF,0xCF},/*"师",5*/
    
42. 
    
43. {0xCC,0xE6,0xE6,0xFF,0x80,0x9F,0x3F,0xE0,
    
44. 0xFF,0xFE,0x00,0xFE,0xFE,0xFE,0xF8,0xFC,
    
45. 0xF3,0x73,0x67,0xCF,0x00,0xFC,0xF9,0x0F,
    
46. 0x9F,0x3F,0x00,0x7F,0x7F,0x7F,0x7F,0xFF},/*"学",6*/
    
47. 
    
48. {0xFF,0x83,0x90,0x84,0x81,0x8E,0x87,0x93,
    
49. 0x90,0x93,0x83,0x87,0x9E,0x9E,0x9C,0x99,
    
50. 0x9F,0xCF,0x00,0xFC,0xF9,0x03,0xFF,0xFF,
    
51. 0x00,0x27,0x27,0x27,0x64,0x64,0xF0,0xFF},/*"院",7*/
    
52. 
    
53. {0xFE,0xFE,0xFC,0xF9,0xF3,0xE7,0xC0,0x1E,
    
54. 0xFE,0xC0,0xFE,0xE6,0xF2,0xF2,0x00,0xFF,
    
55. 0x7F,0x7F,0x3F,0x9F,0xCF,0xE7,0x03,0x78,
    
56. 0x7F,0x03,0x7F,0x67,0x67,0x4F,0x00,0xFF},/*"金",8*/
    
57. 
    
58. {0xF9,0xF9,0xF0,0xE7,0xCF,0x80,0x0E,0xCE,
    
59. 0xC0,0xCE,0xCE,0xC0,0xFF,0xFF,0x00,0xFF,
    
60. 0xFF,0xFF,0x0F,0xCF,0x9F,0x03,0x73,0x73,
    
61. 0x03,0x73,0x73,0x03,0xFF,0xFF,0x00,0xFF},/*"鱼",9*/
    
62. 
    
63. {0xE7,0xE7,0xE7,0xE7,0x81,0x80,0x80,0x81,
    
64. 0x80,0x81,0x81,0x81,0x89,0xFF,0xFF,0xFF,
    
65. 0xCF,0xCF,0x87,0x87,0x33,0x49,0xE4,0xE7,
    
66. 0x01,0xF9,0xF3,0x33,0x87,0xCF,0xE7,0xE7},/*"岭",10*/
    
67. 
    
68. {0xE7,0xE7,0xE7,0xE6,0x01,0xE7,0xC6,0xC0,
    
69. 0x81,0x87,0x27,0xE7,0xE7,0xE7,0xE7,0xE4,
    
70. 0x9F,0xCF,0xCF,0x00,0xFF,0x33,0x79,0xFC,
    
71. 0x33,0x33,0x87,0x87,0xCF,0x87,0x33,0x78},/*"校",11*/
    
72. 
    
73. {0xFF,0x80,0x9F,0x9F,0x99,0x9C,0x9E,0x9F,
    
74. 0x9E,0x9C,0x99,0x93,0x9F,0x9F,0x80,0xFF,
    
75. 0xFF,0x01,0xFF,0xE7,0xE7,0xCF,0x1F,0x3F,
    
76. 0x1F,0xCF,0xE7,0xE7,0xFF,0xFF,0x00,0xFF},/*"区",12*/
    
77. 
    
78. {0xFF,0xFF,0xFF,0xF3,0xC3,0xF3,0xF3,0xF3,
    
79. 0xF3,0xF3,0xF3,0xF3,0xF3,0xC0,0xFF,0xFF,/*"1",13*/
    
80. 0xFF,0xFF,0xFF,0x80,0x9F,0x9F,0x9F,0x83,
    
81. 0x99,0xFC,0xFC,0x9C,0x99,0xC3,0xFF,0xFF},/*"5",14*/
    
82. 
    
83. {0xE7,0xE4,0xCF,0xCF,0x93,0x03,0xE7,0xCF,
    
84. 0x9E,0x02,0x9E,0xFE,0xE0,0x0C,0x99,0xFE,
    
85. 0xFF,0x01,0x39,0x33,0x33,0x27,0x21,0x39,
    
86. 0x19,0x19,0x43,0x43,0xE7,0xC3,0x99,0x3C},/*"级",15*/
    
87. 
    
88. {0xFE,0xFE,0xFE,0xC0,0xCE,0xCE,0xCE,0xC0,
    
89. 0xCE,0xCE,0xCE,0xC0,0xCE,0xFE,0xFE,0xFF,
    
90. 0x7F,0x7F,0x7F,0x03,0x73,0x73,0x73,0x03,
    
91. 0x73,0x73,0x73,0x03,0x70,0x7C,0x7C,0x00},/*"电",16*/
    
92. 
    
93. {0xFF,0x80,0xFF,0xFF,0xFF,0xFE,0xFE,0x00,
    
94. 0xFE,0xFE,0xFE,0xFE,0xFE,0xFE,0xF8,0xFC,
    
95. 0xFF,0x03,0xE7,0xCF,0x9F,0x3F,0x7F,0x00,
    
96. 0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0xFF},/*"子",17*/
    
97. 
    
98. {0xFE,0xFE,0xFE,0xC0,0xFC,0xFC,0x00,0xF9,
    
99. 0xF3,0xF0,0xFF,0xFF,0xF8,0xFE,0xFF,0xFF,
    
100. 0x7F,0x7F,0x7F,0x03,0xFF,0xFF,0x00,0xFF,
     
101. 0xFF,0x07,0xE7,0xCF,0x9F,0x3F,0x9F,0xCF},/*"专",18*/
     
102. 
     
103. {0xF9,0xF9,0xF9,0xF9,0x99,0xC9,0xC9,0xE1,
     
104. 0xE1,0xE1,0xF9,0xF9,0xF9,0xF9,0x00,0xFF,
     
105. 0x9F,0x9F,0x9F,0x9F,0x99,0x99,0x93,0x93,
     
106. 0x87,0x8F,0x9F,0x9F,0x9F,0x9F,0x00,0xFF},/*"业",19*/
     
107. 
     
108. {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
     
109. 0xFF,0xC7,0xC7,0xFF,0xC7,0xC7,0xFF,0xFF,
     
110. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
     
111. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},/*"：",20*/
     
112. 
     
113. {0xF3,0xF3,0x00,0xF3,0x9F,0xC8,0xCF,0x38,
     
114. 0x99,0x80,0xE1,0x08,0xC9,0xC9,0xC9,0xF9,
     
115. 0xCF,0xCF,0x00,0xC3,0x99,0x00,0x9F,0x01,
     
116. 0x99,0x01,0x99,0x01,0x99,0x99,0x81,0xF3},/*"蒲",21*/
     
117. 
     
118. {0xF3,0xF3,0x00,0xF3,0xFF,0xFF,0xC0,0xCF,
     
119. 0xCF,0xCF,0xCF,0xCF,0xCF,0x9F,0x9E,0x38,
     
120. 0xCF,0xCF,0x00,0xCF,0x27,0x33,0x01,0x3F,
     
121. 0x33,0x33,0x87,0x87,0xC9,0x81,0x31,0xF9},/*"茂",22*/
     
122. 
     
123. {0xFC,0xFE,0xC0,0xCF,0xCF,0xC0,0xCF,0xCF,
     
124. 0xC0,0xCC,0xCE,0xCF,0xCF,0xC9,0xC3,0xC7,
     
125. 0xFF,0x7F,0x07,0xE7,0xE7,0x07,0xE7,0xE7,
     
126. 0x07,0xF3,0x67,0x0F,0x9F,0xCF,0xE3,0xF8},/*"良",23*/
     
127. 
     
128. {0xFF,0xFF,0xFF,0xC3,0x99,0x3C,0x3C,0x3C,
     
129. 0x3C,0x3C,0x3C,0x04,0x91,0xC3,0xF8,0xFF,/*"Q",24*/
     
130. 0xFF,0xFF,0xFF,0xC3,0x99,0x3C,0x3C,0x3C,
     
131. 0x3C,0x3C,0x3C,0x04,0x91,0xC3,0xF8,0xFF},/*"Q",25*/
     
132. 
     
133. {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
     
134. 0xFF,0xC7,0xC7,0xFF,0xC7,0xC7,0xFF,0xFF,
     
135. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
     
136. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},/*"：",26*/
     
137. 
     
138. {0xFF,0xFF,0xFF,0xF3,0xC3,0xF3,0xF3,0xF3,
     
139. 0xF3,0xF3,0xF3,0xF3,0xF3,0xC0,0xFF,0xFF,/*"1",27*/
     
140. 0xFF,0xFF,0xFF,0x80,0x9F,0x9F,0x9F,0x83,
     
141. 0x99,0xFC,0xFC,0x9C,0x99,0xC3,0xFF,0xFF},/*"5",28*/
     
142. 
     
143. {0xFF,0xFF,0xFF,0xF9,0xF1,0xF1,0xE1,0xC9,
     
144. 0xC9,0x99,0x80,0xF9,0xF9,0xE0,0xFF,0xFF,/*"4",29*/
     
145. 0xFF,0xFF,0xFF,0xE3,0xC9,0x9C,0x9C,0x9C,
     
146. 0x9C,0x9C,0x9C,0x9C,0xC9,0xE3,0xFF,0xFF},/*"0",30*/
     
147. 
     
148. {0xFF,0xFF,0xFF,0xC1,0x9C,0x9C,0x9C,0xC9,
     
149. 0xE3,0xC9,0x9C,0x9C,0x9C,0xC1,0xFF,0xFF,/*"8",31*/
     
150. 0xFF,0xFF,0xFF,0xC1,0x9C,0x9C,0x9C,0xFC,
     
151. 0xF9,0xF3,0xE7,0xCF,0x9C,0x80,0xFF,0xFF},/*"2",32*/
     
152. 
     
153. {0xFF,0xFF,0xFF,0x80,0x9C,0xF9,0xF9,0xF3,
     
154. 0xF3,0xE7,0xE7,0xE7,0xE7,0xE7,0xFF,0xFF,/*"7",33*/
     
155. 0xFF,0xFF,0xFF,0x80,0x9C,0xF9,0xF9,0xF3,
     
156. 0xF3,0xE7,0xE7,0xE7,0xE7,0xE7,0xFF,0xFF},/*"7",34*/
     
157. 
     
158. {0xFF,0xFF,0xFF,0xE3,0xC9,0x9C,0x9C,0x9C,
     
159. 0x9C,0x9C,0x9C,0x9C,0xC9,0xE3,0xFF,0xFF,/*"0",35*/
     
160. 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
     
161. 0xFF,0xFF,0xFF,0xFF,0x8F,0x8F,0xFF,0xFF},/*".",36*/
     
162. 
     
163. };
     
164. /****上面就是列数据，数据可以用取模软件生成****/
     
165. 
     
166. void main()
     
167. {
     
168.   TMOD=0x01;
     
169.   TH0=(65536-50000)/256;
     
170.   TL0=(65536-50000)%256;
     
171.   TR0=1;
     
172.   /****这是时间设定****/
     
173. while(1)
     
174.   {
     
175.    if(TF0==1)//判断定时设定是否溢出，
     
176.     {
     
177.          TF0=0;        //溢出就清零。
     
178.          c++;
     
179.          if(c==16)//溢出16次为一秒，数据之间间隔。
     
180.           {
     
181.             c=0;
     
182.             b++;  //这是数组个数，满30就重头开始。
     
183.                 if(b==30)
     
184.                  {
     
185.               b=0;
     
186.                  }
     
187.           }
     
188.         }
     
189. /*下面中每一次数据传输后都有个清屏，也就是消隐，数据32个中前16个是
     
190. 每个字的前一半，同理后16个*/
     
191.    for(a=0;a<8;a++)         //前8位扫描；
     
192.     {
     
193.          sao=1;
     
194.          P3=tbo[a];
     
195.          su=1;
     
196.          P1=tbo1[b][a];
     
197.          P1=0xff;
     
198.          su=0;
     
199.          su1=1;
     
200.          P1=tbo1[b][a+16];//A加16是数据前面8位；
     
201.          P1=0xff;
     
202.          su1=0;
     
203.         }
     
204.         P3=0x00;
     
205.         sao=0;
     
206. 
     
207.    for(a=8;a<16;a++)  //后8位扫描；
     
208.     {
     
209.          sao1=1;
     
210.          P3=tbo[a];
     
211.          su=1;
     
212.          P1=tbo1[b][a];
     
213.          P1=0xff;
     
214.          su=0;
     
215.          su1=1;
     
216.          P1=tbo1[b][a+16]; //A加16是数据后面8位；
     
217.          P1=0xff;
     
218.          su1=0;
     
219.         }
     
220.         P3=0x00;
     
221.         sao1=0;
     
222.         a=0;
     
223. 
     
224. …………限于本文篇幅 余下代码请从51黑下载附件…………

复制代码

所有资料51hei提供下载:
16x16显示（单片机）.zip (3.61 KB, 下载次数: 40)

2017-11-8 16:12 上传

点击文件名下载附件
下载积分: 黑币 -5

---

作者: admin    时间: 2017-11-9 03:22
好资料，51黑有你更精彩!!!

---

作者: 莫笑丶良    时间: 2017-11-10 08:21

admin 发表于 2017-11-9 03:22
好资料，51黑有你更精彩!!!

为什么我的视屏没有发上去？

---

作者: 1603010315    时间: 2019-4-13 19:50
真不知道我哪天才有此水平

---

作者: 欧阳云天    时间: 2019-4-13 22:12
P1=tbo1[b][a],初学者请教一下,这样写是P1=tbo1[b],还是P1=tbo1o[a]

---

作者: 迪迪    时间: 2019-12-11 11:09
灯的亮度不够

---

欢迎光临 (http://www.51hei.com/bbs/)

Powered by Discuz! X3.1