DS1302和液晶1602中显示时钟，为什么不走，显示是时间也是错误的 -

标题: DS1302和液晶1602中显示时钟，为什么不走，显示是时间也是错误的 [打印本页]

作者: 陌路狂花 时间: 2017-11-21 17:33
标题: DS1302和液晶1602中显示时钟，为什么不走，显示是时间也是错误的
# include <reg52.h>
# define uchar unsigned char
# define uint unsigned int

sbit lcden = P3^4;
sbit rs = P3^5;
sbit wr = P3^6;

sbit rst = P1^0;
sbit io = P1^1;
sbit sclk  = P1^2;

uchar code dage[] = "2017-11-17 FRI";
uchar code dage1[] = "    : :  ";

uchar miao, fen, shi, i;
/*  ***  函数声明 ****/
void display();
void write_sfm(uchar, uchar);
void Send_595(uchar);
void delay(uint);
void write_com(uchar);
void write_date(uchar);
void write_byte(uchar);
void init_lcd();
void set_ds1302();
uchar read_ds1302(uchar);
uchar read_byte();

void main()
{
init_lcd();
set_ds1302();
while(1)
{
display();
}
}

void delay(uint z)
{
uint x, y;
for(x=z; x>0; x--)
   for(y=110; y>0; y--);
}
/****** 往1602液晶写入指令 ****/

void write_com(uchar com)
{
rs = 0;
P0 = com;
delay(5);
lcden = 1;
delay(5);
lcden = 0;
}
/*****  1602液晶初始化  ******/
void init_lcd()
{
/*Send_595(0xff);
Send_595(0x00);
P_HC595_RCLK = 0;
P_HC595_RCLK = 1;*/

wr = 0;
lcden = 0;

write_com(0x38);
write_com(0x0c);
write_com(0x06);
write_com(0x01);

for(i=0; i<16; i++)
{
write_date(dage[i]);
delay(5);
}

write_com(0x80+0x40);

for(i=0; i<13; i++)
{
write_date(dage1[i]);
delay(5);
}
}
/*  *****往1602液晶写入数据 ****** */
void write_date(uchar date)
{
rs = 1;
P0 = date;
delay(5);
lcden = 1;
delay(5);
lcden = 0;
}

/****** DS1302 中写入一个字节 ***/
void write_byte(uchar date)
{
uchar i, temp;
temp = date;
for(i=0; i<8; i++)
{
if((temp&0x01) == 1)
io = 1;
else
io = 0;
sclk = 1;
sclk = 0;
temp >>= 1;
}
}
/*****′ ***/
uchar read_byte()
{
uchar i, temp;
for(i=0; i<8; i++)
{
temp>>=1;
if(io == 1)
temp|=0x80;
   sclk = 1;
   sclk = 0;
}
return temp;
}

/***** Ö¸¶¨Î»ÖÃD′ ****/
void write_ds1302(uchar addr, uchar date)
{
rst = 0;
sclk = 0;
rst = 1;

write_byte(addr);
write_byte(date);

sclk = 1;
rst = 0;
}
/****** Ö¸¶¨Î»ÖÃ¶á ***/
uchar read_ds1302(uchar addr)
{
uchar date;
rst = 0;
sclk = 0;
rst = 1;
write_byte(addr);
date = read_byte();
sclk = 1;
rst = 0;

  return date;
}
/******  3õê¼»ˉDS1302  *****/
void set_ds1302()
{
write_ds1302(0x8e, 0x00);

write_ds1302(0x80, 0x00);
write_ds1302(0x82, 0x00);
write_ds1302(0x84, 0x00);

write_ds1302(0x8e, 0x80);
}
/****** ê±￡¬·Ö￡¬Ãë ￡¬·Öàë¸ö￡¬ ê®Î»  ****/
void write_sfm(uchar addr, uchar date)
{
uchar shi, ge;
shi = date/10;
ge = date%10;
write_com(0x80+0x40+addr);
write_date(0x30+shi);
write_date(0x30+ge);
}

/****** íù1602ÖDÏÔê¾êy¾Y ****/
void display()
{
uchar d;
write_ds1302(0x8e, 0x00);

d = read_ds1302(0x81);
miao = (d/16)*10 + d%16;
  write_sfm(11, miao);

d = read_ds1302(0x83);
miao = (d/16)*10 + d%16;
  write_sfm(7, fen);

d = read_ds1302(0x85);
miao = (d/16)*10 + d%16;
  write_sfm(3, shi);

write_ds1302(0x8e, 0x80);
}

IMG_20171121_170928.jpg (3.78 MB, 下载次数: 53)

JW-51开发板.pdf

99.63 KB, 下载次数: 3

作者: ziuny 时间: 2017-11-21 18:26
最好把DS1302的各个寄存器的功能贴出来就好了,

作者: gaohan130 时间: 2017-11-22 20:57
计时的功能都没有，怎么让时间加？

作者: zl2168 时间: 2017-11-22 21:22
好像给你介绍过一个正确有效案例，仔细去研读啊！

作者: 陌路狂花 时间: 2017-11-26 15:23

gaohan130 发表于 2017-11-22 20:57
计时的功能都没有，怎么让时间加？

DS1302有自动计时的功能，不用计时器

作者: csar 时间: 2017-11-27 10:53
建议去共享区下载一个现成的，吃透的再改，看完看懂这个程序时间足够吃透一个正确的程序了，

欢迎光临 (http://www.51hei.com/bbs/)