EP32的开发环境搭建可以讲讲  ESP32 上的程序 基于 Arduino

不错的玩法 赞一个

不错的文章,学习了

好文章，收藏一个先。

ESP32 上的程序 基于 Arduino 和 Blynk
/*************************************************************
  Download latest Blynk library here:
    https://github.com/blynkkk/blynk-library/releases/latest

  Blynk is a platform with iOS and Android apps to control
  Arduino, Raspberry Pi and the likes over the Internet.
  You can easily build graphic interfaces for all your
  projects by simply dragging and dropping widgets.


  Blynk library is licensed under MIT license
  This example code is in public domain.

*************************************************************
  This example runs directly on ESP32 chip.

  Note: This requires ESP32 support package:
    https://github.com/espressif/arduino-esp32

  Please be sure to select the right ESP32 module
  in the Tools -> Board menu!

  Change WiFi ssid, pass, and Blynk auth token to run :)
  Feel free to apply it to any other example. It's simple!
*************************************************************/

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial


#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>

// You should get Auth Token in the Blynk App.
// Go to the Project Settings (nut icon).
char auth[] = "your_auth";          //改成你自己的 auth

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "wifi_name";      //改成你自己的 wifi 名称
char pass[] = "wifi_password";  //改成你自己的 wifi 密码

int powerPin = 25;  //dac输出脚


BLYNK_WRITE(V1)
{
    float tmpVal;
    tmpVal = param.asInt();
    tmpVal = tmpVal / 100; // assigning incoming value from pin V1 to a variable
    tmpVal = tmpVal / 6;   //根据分压电阻调整系数
    tmpIntVal = tmpVal * 256 /3.3;
    dacWrite(powerPin, tmpIntVal);  
}

void setup()
{
  // Debug console
  Serial.begin(115200);
  Blynk.begin(auth, ssid, pass);
}

void loop()
{
  Blynk.run();
}

admin 发表于 2019-3-13 22:08
楼主能分享制作资料吗?

明天补上

楼主能分享制作资料吗?