T6963的240128时钟运行不正常问题请教各位附单片机程序

ID:78901 发表于 2022-7-10 09:04

FS：字体选择，H:6X8点，L：8X8点 fs要接低电平

ID:16255 发表于 2022-5-25 23:20

几年前在黄鱼淘了一片T6963的240128显示屏，在网上找了很多的资料，终于成功点亮了。

目前该显示屏已做成时钟，至今运行正常。

ID:977804 发表于 2022-4-13 20:33

想问一个，是240128 ,还是24064

ID:517951 发表于 2021-9-5 15:07

设置一个定时器，用来定时按键扫描，和LCD刷新时间。上面这个main主程序直接就是循环读写，是不行的。

ID:292903 发表于 2021-9-3 19:53

我好像看过能显示的贴子楼主使用的是STC89单片机吗?我记得帖子里面写的是要使用12系列

ID:600695 发表于 2021-3-15 01:37

这个程序错误太多，秒走的时快时慢，最长2.5秒动一下，按键也不起作用，时的累计到23点完了是12点然后才一点，没什么实用价值，还是放弃了算了，那个大哥能给个好用的8k内的240128程序吗

ID:600695 发表于 2021-3-14 18:00

这样贴上来行不行？？？？
#include <reg52.h>
//#include <intrins.h>
#include <math.h>

//#define nop()  _nop_()
#define uchar unsigned char
#define uint unsigned int

//1. FG：液晶边框引出端，应该接地
//2. VSS：逻辑电源地，接电源的负极
//3. VDD：逻辑电源正，接电源的正极
//4. V0：LCD驱动电压输入端，可通过滑动变阻器接到电源正极上，改变电阻大小来改变液晶对比度
sbit LCDWR =P3^1;//5. /WR：写数据信号，上升沿锁存
sbit LCDRD =P3^2;//6. /RD：读数据信号，上升沿锁存
sbit LCDCE =P3^4;//7. /CE：LCD选通信号，低电平有效
sbit LCDCD =P3^3;//8. C/D：命令/数据：高电平为命令，低电平为数据
//9.:暂时没用
sbit LCDRST =P3^5;//10. /RST：复位信号，低电平有效
#define lcd_bus       P0//11-18. DB0-DB7 :8位数据总线
//19. FS：字体选择，H:6X8点，L：8X8点
//20. VEE
//21. LEDA：背光电源正极
//22. LEDK：背光电源负极

sbit DQ18B20=P1^3;//ds18b20与单片机连接口

sbit acc0=ACC^0;          //移位时的第0位
sbit acc7=ACC^7;          //移位时用的第7位

sbit DATA1302=P1^5; //时钟数据接口
sbit RST1302=P1^6;
sbit SCLK1302=P1^4;
sbit menu=P3^0;             //菜单
sbit add=P3^1;             //加一
sbit dec=P3^2;             //减一

uchar second,minute,hour,day,month,year,week,count=0;
uchar ReadValue,num,time;
uint tvalue;//温度值
uchar tflag;

//----  LCD PIXEL SETTING  ------------------------------------------------------
#define PIXELH 128
#define PIXELW 240

//-------------------------------------------------------------------------------

unsigned char code tab1[]=//16x16的汉字或者图片[取模方式]从左到右从上到下 :横向8点左高位
{
0x08,0x00,0x0F,0xFC,0x10,0x80,0x10,0x80,0x20,0x80,0x4F,0xF8,0x88,0x80,0x08,0x80,
0x08,0x80,0x08,0x80,0xFF,0xFE,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,//年",0
0x07,0xF0,0x04,0x10,0x04,0x10,0x04,0x10,0x07,0xF0,0x04,0x10,0x04,0x10,0x04,0x10,
0x07,0xF0,0x04,0x10,0x08,0x10,0x08,0x10,0x10,0x10,0x20,0x50,0x40,0x20,0x00,0x00,//月",1
0x00,0x00,0x1F,0xF0,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0xF0,0x10,0x10,
0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0xF0,0x10,0x10,0x00,0x00,0x00,0x00,//日",2
0x00,0x00,0x1F,0xF8,0x10,0x08,0x1F,0xF8,0x10,0x08,0x1F,0xF8,0x01,0x00,0x11,0x00,
0x1F,0xFC,0x21,0x00,0x21,0x00,0x4F,0xF8,0x01,0x00,0x01,0x00,0x7F,0xFE,0x00,0x00,//星",3

0x22,0x00,0x22,0x7C,0x7F,0x44,0x22,0x44,0x3E,0x44,0x22,0x7C,0x3E,0x44,0x22,0x44,
0x22,0x44,0xFF,0x7C,0x00,0x44,0x24,0x84,0x22,0x84,0x43,0x14,0x81,0x08,0x00,0x00,//期",4

0x01,0xC0,0x02,0x20,0x02,0xE0,0x02,0x20,0x02,0xE0,0x02,0x20,0x02,0xE0,0x02,0x20,
0x02,0xE0,0x02,0x20,0x0F,0xF8,0x0F,0xF8,0x07,0xF0,0x03,0xE0,0x01,0xC0,0x00,0x00,//"温度计符号",5

0x00,0x00,0x00,0x00,0x78,0x00,0x48,0xFC,0x49,0x04,0x79,0x04,0x02,0x00,0x02,0x00,
0x02,0x00,0x02,0x00,0x02,0x04,0x01,0x04,0x01,0x08,0x00,0xF0,0x00,0x00,0x00,0x00,//"℃,6

0x00,0x00,0x01,0x00,0x02,0x80,0x04,0x40,0x05,0xC0,0x04,0x40,0x05,0xC0,0x04,0x40,
0x05,0xC0,0x04,0x40,0x05,0xC0,0x04,0x40,0x0F,0xE0,0x07,0xC0,0x03,0x80,0x01,0x00,//温度计的图片，7

};

unsigned char code tab2[]=//8x16的字符
{
0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x24,0x18,0x00,0x00,//0",0
0x00,0x00,0x00,0x10,0x70,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00,//1",1
0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x04,0x04,0x08,0x10,0x20,0x42,0x7E,0x00,0x00,//2",2
0x00,0x00,0x00,0x3C,0x42,0x42,0x04,0x18,0x04,0x02,0x02,0x42,0x44,0x38,0x00,0x00,//3",3
0x00,0x00,0x00,0x04,0x0C,0x14,0x24,0x24,0x44,0x44,0x7E,0x04,0x04,0x1E,0x00,0x00,//4",4
0x00,0x00,0x00,0x7E,0x40,0x40,0x40,0x58,0x64,0x02,0x02,0x42,0x44,0x38,0x00,0x00,//5",5
0x00,0x00,0x00,0x1C,0x24,0x40,0x40,0x58,0x64,0x42,0x42,0x42,0x24,0x18,0x00,0x00,//6",6
0x00,0x00,0x00,0x7E,0x44,0x44,0x08,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00,//7",7
0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x24,0x18,0x24,0x42,0x42,0x42,0x3C,0x00,0x00,//8",8
0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x26,0x1A,0x02,0x02,0x24,0x38,0x00,0x00,//9",9
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x60,0x00,0x00,//.",10
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//负号，11
0x00,0x00,0x00,0x00,0x10,0x10,0x10,0xFE,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,//正号，12
};
unsigned char code tab3[]=//32x64的手绘数字（3264）
{
0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x07,0xFE,0x7F,0xC0,0x07,0xFE,0x7F,0xC0,0x0F,0xFE,0x7F,0xC0,0x0F,0xFE,
0x7F,0xC0,0x1B,0xFE,0x7F,0xC0,0x1B,0xFE,0x7F,0xC0,0x33,0xFE,0x7F,0xC0,0x33,0xFE,
0x7F,0xC0,0x63,0xFE,0x7F,0xC0,0x63,0xFE,0x7F,0xC0,0xC3,0xFE,0x7F,0xC0,0xC3,0xFE,
0x7F,0xC1,0x83,0xFE,0x7F,0xC1,0x83,0xFE,0x7F,0xC3,0x03,0xFE,0x7F,0xC3,0x03,0xFE,
0x7F,0xC6,0x03,0xFE,0x7F,0xC6,0x03,0xFE,0x7F,0xCC,0x03,0xFE,0x7F,0xCC,0x03,0xFE,
0x7F,0xD8,0x03,0xFE,0x7F,0xD8,0x03,0xFE,0x7F,0xF0,0x03,0xFE,0x7F,0xF0,0x03,0xFE,
0x7F,0xE0,0x03,0xFE,0x7F,0xE0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00, //0

0x00,0x00,0x00,0x00,0x00,0x00,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0xFF,0xFC,0x00,
0x0F,0xFF,0xFC,0x00,0x0F,0xFF,0xFC,0x00,0x0F,0xFF,0xFC,0x00,0x0F,0xFF,0xFC,0x00,
0x0F,0xFF,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x00,0x00,0x00,//:\字模\32-64用\1.BMP

0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x00,0x00,0x07,0xFE,0x00,0x00,0x0F,0xFE,0x00,0x00,0x1F,0xFE,
0x00,0x00,0x3F,0xFE,0x00,0x00,0x7F,0xFE,0x00,0x00,0xFF,0xFC,0x00,0x01,0xFF,0xF8,
0x00,0x03,0xFF,0xF0,0x00,0x07,0xFF,0xE0,0x00,0x0F,0xFF,0xC0,0x00,0x1F,0xFF,0x80,
0x00,0x3F,0xFF,0x00,0x00,0x7F,0xFE,0x00,0x00,0xFF,0xFC,0x00,0x01,0xFF,0xF8,0x00,
0x03,0xFF,0xF0,0x00,0x07,0xFF,0xE0,0x00,0x0F,0xFF,0xC0,0x00,0x1F,0xFF,0x80,0x00,
0x3F,0xFF,0x00,0x00,0x7F,0xFE,0x00,0x00,0x7F,0xFC,0x00,0x00,0x7F,0xF8,0x00,0x00,
0x7F,0xF0,0x00,0x00,0x7F,0xE0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x00,0x00,0x00,0x00,//2

0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x00,0x00,0x07,0xFE,0x00,0x00,0x0F,0xFC,0x00,0xFF,0xFF,0xF8,
0x00,0xFF,0xFF,0xF0,0x00,0xFF,0xFF,0xF0,0x00,0xFF,0xFF,0xE0,0x00,0xFF,0xFF,0xF0,
0x00,0xFF,0xFF,0xF0,0x00,0xFF,0xFF,0xF8,0x00,0xFF,0xFF,0xFC,0x00,0xFF,0xFF,0xFE,
0x00,0x00,0x0F,0xFE,0x00,0x00,0x07,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,//3

0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,
0x00,0x00,0x7F,0xE0,0x00,0x00,0x7F,0xE0,0x00,0x00,0xFF,0xE0,0x00,0x00,0xFF,0xE0,
0x00,0x01,0xFF,0xE0,0x00,0x01,0xFF,0xE0,0x00,0x03,0xFF,0xE0,0x00,0x03,0xFF,0xE0,
0x00,0x07,0xFF,0xE0,0x00,0x07,0xFF,0xE0,0x00,0x0F,0xFF,0xE0,0x00,0x0F,0xFF,0xE0,
0x00,0x1F,0xFF,0xE0,0x00,0x1F,0xFF,0xE0,0x00,0x3F,0xFF,0xE0,0x00,0x3F,0xFF,0xE0,
0x00,0x7F,0xBF,0xE0,0x00,0x7F,0xBF,0xE0,0x00,0xFF,0x3F,0xE0,0x00,0xFF,0x3F,0xE0,
0x01,0xFE,0x3F,0xE0,0x01,0xFE,0x3F,0xE0,0x03,0xFC,0x3F,0xE0,0x03,0xFC,0x3F,0xE0,
0x07,0xF8,0x3F,0xE0,0x07,0xF8,0x3F,0xE0,0x0F,0xF0,0x3F,0xE0,0x0F,0xF0,0x3F,0xE0,
0x1F,0xE0,0x3F,0xE0,0x1F,0xE0,0x3F,0xE0,0x3F,0xC0,0x3F,0xE0,0x3F,0xC0,0x3F,0xE0,
0x7F,0x80,0x3F,0xE0,0x7F,0x80,0x3F,0xE0,0x7F,0x00,0x3F,0xE0,0x7F,0x00,0x3F,0xE0,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,
0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,
0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,
0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x00,0x00,//F:\字模\32-64用\4-1.BMP

0x00,0x00,0x00,0x00,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xCF,0xFF,0xC0,0x7F,0xDF,0xFF,0xE0,0x7F,0xFF,0xFF,0xF0,0x7F,0xFF,0xFF,0xF8,
0x7F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,//5

0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xDF,0xFF,0xC0,0x7F,0xFF,0xFF,0xE0,0x7F,0xFF,0xFF,0xF0,0x7F,0xFF,0xFF,0xF8,
0x7F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,//6

0x00,0x00,0x00,0x00,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x00,0x00,0x07,0xFC,0x00,0x00,0x07,0xFC,0x00,0x00,0x07,0xFC,
0x00,0x00,0x0F,0xF8,0x00,0x00,0x0F,0xF8,0x00,0x00,0x0F,0xF8,0x00,0x00,0x1F,0xF0,
0x00,0x00,0x1F,0xF0,0x00,0x00,0x1F,0xF0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,
0x00,0x00,0x3F,0xE0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,
0x00,0x00,0xFF,0x80,0x00,0x00,0xFF,0x80,0x00,0x00,0xFF,0x80,0x00,0x01,0xFF,0x00,
0x00,0x01,0xFF,0x00,0x00,0x01,0xFF,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,
0x00,0x03,0xFE,0x00,0x00,0x07,0xFC,0x00,0x00,0x07,0xFC,0x00,0x00,0x07,0xFC,0x00,
0x00,0x0F,0xF8,0x00,0x00,0x0F,0xF8,0x00,0x00,0x0F,0xF8,0x00,0x00,0x1F,0xF0,0x00,
0x00,0x1F,0xF0,0x00,0x00,0x1F,0xF0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,
0x00,0x3F,0xE0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,
0x00,0xFF,0x80,0x00,0x00,0xFF,0x80,0x00,0x00,0xFF,0x80,0x00,0x01,0xFF,0x00,0x00,
0x01,0xFF,0x00,0x00,0x01,0xFF,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,
0x03,0xFE,0x00,0x00,0x07,0xFC,0x00,0x00,0x07,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,//7

0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFC,
0x3F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xF0,0x0F,0xFF,0xFF,0xE0,0x07,0xFF,0xFF,0xF0,
0x0F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xFC,0x3F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00, //8

0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x3F,0xFF,0xFF,0xFE,0x1F,0xFF,0xFF,0xFE,0x0F,0xFF,0xFF,0xFE,0x07,0xFF,0xFF,0xFE,
0x03,0xFF,0xFB,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,//9

};
uchar code tab4[]= //8x64的字符:
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x7E,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7E,0x3C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0x7E,0x3C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//
};
uchar code tab5[]= //16x16，星期用
{
      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x7F,0xFE,
      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//一",0
      0x00,0x00,0x00,0x10,0x3F,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x7F,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,//二",1
      0x00,0x00,0x00,0x00,0x7F,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xF8,
      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFE,0x00,0x00,0x00,0x00,//三",2
      0x00,0x00,0x7F,0xFC,0x44,0x84,0x44,0x84,0x44,0x84,0x44,0x84,0x44,0x84,0x44,0x84,
      0x48,0x84,0x48,0x7C,0x50,0x04,0x60,0x04,0x40,0x04,0x7F,0xFC,0x40,0x04,0x00,0x00,//四",3
      0x00,0x00,0x7F,0xF8,0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x20,0x3F,0xF0,
      0x04,0x20,0x04,0x20,0x04,0x20,0x04,0x20,0x04,0x24,0xFF,0xFE,0x00,0x00,0x00,0x00,//五",4
      0x04,0x00,0x03,0x00,0x01,0x80,0x01,0x00,0xFF,0xFE,0x00,0x00,0x00,0x00,0x04,0x80,
      0x06,0x40,0x04,0x20,0x08,0x10,0x08,0x18,0x10,0x0C,0x20,0x0C,0x40,0x08,0x00,0x00,//六",5
      0x00,0x00,0x1F,0xF0,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0xF0,0x10,0x10,
      0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0xF0,0x10,0x10,0x00,0x00,0x00,0x00,//日",6
};
/*****************1ms延时函数****************/
void delay(uint z)
{
      uint x,y;
      for(x=z;x>0;x--)
            for(y=110;y>0;y--);
}
void delay1(uint z) //微秒延时
{
      for(;z>0;z--);
}
unsigned char rd_cmd6963(void)
{
unsigned char addr_st;
LCDCD = 1;
LCDWR = 1;
LCDCE = 0;
lcd_bus =0xff;
addr_st = lcd_bus;
LCDRD = 0;
LCDRD = 1;
LCDCE = 1;
return(addr_st);
}
/*****************检查忙状态程序****************/
void chkbusy6963(void)
{
unsigned char busy;
do
      {
               busy =!(rd_cmd6963() & 0x03);
      }while(busy);
}
/*****************写数据****************/
void wr_dat6963(unsigned char datax)
{
chkbusy6963();
LCDCD = 0;
LCDRD = 1;
LCDCE = 0;
lcd_bus = datax;
LCDWR = 0;
LCDWR = 1;
LCDCE = 1;
}
/*****************写命令****************/
void wr_cmd6963(unsigned char cmdx)
{
chkbusy6963();
LCDCD = 1;
LCDRD = 1;
LCDCE = 0;
lcd_bus = cmdx;
LCDWR = 0;
LCDWR = 1;
LCDCE = 1;
}

/*****************写寄存器程序****************/
void wr_reg6963(unsigned char cmd,unsigned char dat1,unsigned char dat2)
{
      wr_dat6963(dat1);
      wr_dat6963(dat2);
      wr_cmd6963(cmd);
}

//显示指针，图形模式graphics＝1,文本模式graphics＝0；X坐标x_axis，以8个像素为一个单位
//Y坐标y_axis,图形模式以1个像素为单位，文本模式以8个像素为单位
void lcd_cursor6963(unsigned char graphics,unsigned char x_axis,unsigned char y_axis)
{
unsigned int tmp;
if(graphics)tmp = y_axis*(PIXELW/8) + x_axis + 0x800;
else  tmp = y_axis*(PIXELW/8) + x_axis;
wr_reg6963(0x24,(unsigned char)(tmp),(unsigned char)(tmp>>8));
wr_cmd6963(0xb0);
}
/*****************液晶屏初始化程序****************/
void init6963(void)
{
      LCDRST =0;
      delay(100);
      LCDRST =1;
      wr_cmd6963(0xf0);                      //bit reset
      wr_reg6963(0x21,0x00,0x00); //光标地址设置
      wr_reg6963(0x22,0x00,0x00);          //CGRAM偏置地址设置
      wr_reg6963(0x24,0x00,0x00); //显示地址设置
      wr_reg6963(0x40,0x00,0x00);  //文本显示区首地址
      wr_reg6963(0x41,(unsigned char)(PIXELW/8),0x00);  //文本显示区宽度
      wr_reg6963(0x42,0x00,0x08);  //图形显示区首地址
      wr_reg6963(0x43,(unsigned char)(PIXELW/8),0x00);  //图形显示区宽度
      wr_cmd6963(0x80);             // OR mode
      wr_cmd6963(0x9c);             //文本图形开
      wr_cmd6963(0xa0);             //7line指针
}
/*****************全屏显示内容程序****************/
void lcd_showfull(unsigned char datx)
{
      unsigned int i;
      lcd_cursor6963(0,0,0);
      for(i=0;i<((PIXELW/8)*(PIXELH/8));i++)wr_dat6963(0);
      wr_cmd6963(0xb2);
      lcd_cursor6963(1,0,0);
      for(i=0;i<((PIXELW/8)*PIXELH);i++)wr_dat6963(datx);
      wr_cmd6963(0xb2);                                  //屏刷完后需要补上这句
}
//显示自定义16X16字符,x_axis为X轴，以8像素为单位，y_axis为Y轴，以1像素为单位
void lcd_defcharacter16x16(unsigned char x_axis,unsigned char y_axis,unsigned char ctnchar,unsigned char startchar,unsigned char code *text)
{//ctnchar为要显示的总字符数,startchar为自定义内码的第几个启动显示字符(即表格中的汉字),text为自定义的字符内码
unsigned char line,ctn;
text += startchar*32;
for(ctn=0;ctnchar>0;ctnchar--,ctn+=2)
   {
               for(line=0;line<16;line++)
               {
                        lcd_cursor6963(1,x_axis+ctn,y_axis+line);
                     wr_dat6963(*(text++));
                        wr_dat6963(*(text++));
                     wr_cmd6963(0xb2);                      //屏刷完后需要补上这句
               }
      }
}
//显示自定义8X16字符,x_axis为X轴，以8像素为单位，y_axis为Y轴，以1像素为单位
void lcd_defcharacter8x16(unsigned char x_axis,unsigned char y_axis,unsigned char ctnchar,unsigned char startchar,unsigned char code *text)
{//ctnchar为要显示的总字符数,startchar为自定义内码的第几个启动显示字符(即表格中的汉字),text为自定义的字符内码
unsigned char line,ctn;
text=text + startchar*16;
for(ctn=0;ctnchar>0;ctnchar--,ctn++)
   {
               for(line=0;line<16;line++)
               {
                        lcd_cursor6963(1,x_axis+ctn,y_axis+line);
                        wr_dat6963(*(text++));
                     wr_cmd6963(0xb2);                      //屏刷完后需要补上这句
               }
      }
}
//显示自定义32X64字符,x_axis为X轴，以8像素为单位，y_axis为Y轴，以1像素为单位
void lcd_defcharacter32x64(uchar x_axis,uchar y_axis,uchar ctnchar,uchar startchar,uchar code *text)
{//ctnchar为要显示的总字符数,startchar为自定义内码的第几个启动显示字符(即表格中的汉字),text为自定义的字符内码
uchar line,ctn;
text=text+startchar*256; //256是字符表中一个字的码数
for(ctn=0;ctnchar>0;ctnchar--,ctn=ctn+4)
   {
               for(line=0;line<64;line++)
               {
                        lcd_cursor6963(1,x_axis+ctn,y_axis+line);//
                     wr_dat6963(*(text++));//这一段是竖刷次数32/8=4次。四条
                     wr_dat6963(*(text++));
                     wr_dat6963(*(text++));
      wr_dat6963(*(text++));
                     wr_cmd6963(0xb2);                      //复位自动读写模式，屏刷完后需要补上这句
               }
      }
}

//显示自定义8X64字符（：）,x_axis为X轴，以8像素为单位，y_axis为Y轴，以1像素为单位
void lcd_defcharacter8x48(uchar x_axis,uchar y_axis,uchar ctnchar,uchar startchar,uchar code *text)
{
      //ctnchar为要显示的总字符数
      //startchar为自定义内码的第几个启动显示字符(即表格中的汉字)
      //text为自定义的字符内码
uchar line,ctn;
  text=text+startchar*64; //
for(ctn=0;ctnchar>0;ctnchar--,ctn=ctn+2)
   {
               for(line=0;line<64;line++)
               {
                        lcd_cursor6963(1,x_axis+ctn,y_axis+line);//
                     wr_dat6963(*(text++));
                     wr_cmd6963(0xb2);                      //复位自动读写模式，屏刷完后需要补上这句
               }
      }
}

void Write1302(uchar dat) //1302写
{
      uchar i;
      SCLK1302=0;          //拉低SCLK，为脉冲上升沿写入数据做好准备
      delay1(2);    //稍微等待，使硬件做好准备
      for(i=0;i<8;i++)    //连续写8个二进制位数据
         {
               DATA1302=dat&0x01; //取出dat的第0位数据写入1302
               delay(2);    //稍微等待，使硬件做好准备
               SCLK1302=1;          //上升沿写入数据
               delay1(2);    //稍微等待，使硬件做好准备
               SCLK1302=0;          //重新拉低SCLK，形成脉冲
               dat>>=1;       //将dat的各数据位右移1位，准备写入下一个数据位
         }
}
void WriteSet1302(uchar Cmd,uchar dat)
{
         RST1302=0;          //禁止数据传递
         SCLK1302=0;       //确保写数居前SCLK被拉低
         RST1302=1;          //启动数据传输
         delay1(2);    //稍微等待，使硬件做好准备
         Write1302(Cmd);  //写入命令字
         Write1302(dat);  //写数据
         SCLK1302=1;       //将时钟电平置于已知状态
         RST1302=0;          //禁止数据传递
}
uchar Read1302(void)
{
         uchar i,dat;
         delay(2);    //稍微等待，使硬件做好准备
         for(i=0;i<8;i++) //连续读8个二进制位数据
         {
                  dat>>=1;    //将dat的各数据位右移1位，因为先读出的是字节的最低位
                  if(DATA1302==1) //如果读出的数据是1
                  dat|=0x80; //将1取出，写在dat的最高位
                  SCLK1302=1;    //将SCLK置于高电平，为下降沿读出
                  delay1(2);  //稍微等待
                  SCLK1302=0;    //拉低SCLK，形成脉冲下降沿
                  delay1(2);  //稍微等待
         }
      return dat;       //将读出的数据返回
}
uchar  ReadSet1302(uchar Cmd)
{
      uchar dat;
      RST1302=0;                //拉低RST
      SCLK1302=0;             //确保写数居前SCLK被拉低
      RST1302=1;                //启动数据传输
      Write1302(Cmd);    //写入命令字
      dat=Read1302();    //读出数据
      SCLK1302=1;             //将时钟电平置于已知状态
      RST1302=0;             //禁止数据传递
      return dat;       //将读出的数据返回
}
void Init_DS1302(void)
{
      WriteSet1302(0x8E,0x00);//根据写状态寄存器命令字，写入不保护指令
      WriteSet1302(0x80,0x00);//根据写秒寄存器命令字，写入秒的初始值
      WriteSet1302(0x82,0x30);//根据写分寄存器命令字，写入分的初始值
      WriteSet1302(0x84,0x20);//根据写小时寄存器命令字，写入小时的初始值
      WriteSet1302(0x86,0x13);//根据写日寄存器命令字，写入日的初始值
      WriteSet1302(0x88,0x03);//根据写月寄存器命令字，写入月的初始值
      WriteSet1302(0x8c,0x21);//根据写年寄存器命令字，写入年的初始值
      WriteSet1302(0x8a,0x06);//根据写星期寄存器命令字，写入星期的初始值
}
void DisplaySecond(uchar x)
{
      uchar i,j;
      i=x/10;
      j=x%10;
      lcd_defcharacter24x48(22,18,1,i,tab3);//显示秒的十位tab3是24*48数字
      lcd_defcharacter24x48(26,18,1,j,tab3);//显示秒的个位
}
void DisplayMinute(uchar x)
{
      uchar i,j;
      i=x/10;
      j=x%10;
      lcd_defcharacter24x48(11,18,1,i,tab3);//显示分钟的十位
      lcd_defcharacter24x48(15,18,1,j,tab3);//显示分钟的个位
}
void DisplayHour(uchar x)
{
      uchar i,j;
      i=x/10;
      j=x%10;
      lcd_defcharacter24x48(0,18,1,i,tab3);//显示小时的十位
      lcd_defcharacter24x48(4,18,1,j,tab3);//显示小时的个位
}
void DisplayDay(uchar x)
{
      uchar i,j;

      i=x/10;
      j=x%10;
      lcd_defcharacter8x16(10,0,1,i,tab2);//显示  日的十位tab2是8*16字符数字，带+-号
      lcd_defcharacter8x16(11,0,1,j,tab2);//显示日的个位
}
void DisplayMonth(uchar x)
{
      uchar i,j;
      i=x/10;
      j=x%10;
      lcd_defcharacter8x16(6,0,1,i,tab2);//显示  月的十位
      lcd_defcharacter8x16(7,0,1,j,tab2);//显示月的个位
}
void DisplayYear(uchar x)
{
      uchar i,j;
      i=x/10;
      j=x%10;
      lcd_defcharacter8x16(2,0,1,i,tab2);//显示年的十位
      lcd_defcharacter8x16(3,0,1,j,tab2);//显示年的个位
}
void DisplayWeek(uchar x)
{
      lcd_defcharacter16x16(19,0,1,x-1,tab5);//显示，tab5是星期用字库
}
void  read_date(void)
{
   ReadValue = ReadSet1302(0x81);
   second=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue = ReadSet1302(0x83);
   minute=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue = ReadSet1302(0x85);
   hour=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue = ReadSet1302(0x87);
   day=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue = ReadSet1302(0x89);
   month=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue = ReadSet1302(0x8d);
   year=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue=ReadSet1302(0x8b);                   //读星期
   week=ReadValue&0x07;
   DisplaySecond(second);
   DisplayMinute(minute);
   DisplayHour(hour);
   DisplayDay(day);
   DisplayMonth(month);
   DisplayYear(year);
   DisplayWeek(week);
}
void turn_val(char newval,uchar flag,uchar  newaddr,uchar s1num)
{
      newval=ReadSet1302(newaddr);                   //读取当前时间
newval=((newval&0x70)>>4)*10+(newval&0x0f); //将bcd码转换成十进制
if(flag)                //判断是加一还是减一
{
      newval++;
      switch(s1num)
      {
                        case 1: if(newval>99) newval=0;
                        DisplayYear(newval);
                                       break;
               case 2: if(newval>12) newval=1;
                                       DisplayMonth(newval);
                                       break;
               case 3: if(newval>31) newval=1;
                              DisplayDay(newval);
                                       break;
               case 4: if(newval>6) newval=0;
                              DisplayWeek(newval);
                                       break;
               case 5: if(newval>23) newval=0;
                              DisplayHour(newval);
                                       break;
               case 6: if(newval>59) newval=0;
                              DisplayMinute(newval);
                                       break;
               case 7: if(newval>59) newval=0;
                              DisplaySecond(newval);
                                       break;
               default:break;
      }
   }
else
{
      newval--;
         switch(s1num)
      {
                     case 1: if(newval==0) newval=99;
               DisplayYear(newval);
                              break;
               case 2: if(newval==0) newval=12;
                                 DisplayMonth(newval);
                     break;
               case 3: if(newval==0) newval=31;
                                 DisplayDay(newval);
                     break;
               case 4: if(newval<0) newval=6;
                     DisplayWeek(newval);
                              break;
         case 5: if(newval<0) newval=23;
                     DisplayHour(newval);
                              break;
         case 6: if(newval<0) newval=59;
                     DisplayMinute(newval);
                              break;
         case 7: if(newval<0) newval=59;
                     DisplaySecond(newval);
                              break;
                     default:break;
      }
      }
      WriteSet1302((newaddr-1),((newval/10)<<4)|(newval%10));  //将新数据写入寄存器
}
void delay_18B20(unsigned int i)//延时1微秒
{
      while(i--);
}
void ds1820rst()/*ds1820复位*/
{
      unsigned char x=0;
      DQ18B20 = 1;       //DQ复位
      delay_18B20(4);  //延时
      DQ18B20 = 0;       //DQ拉低
      delay_18B20(100); //精确延时大于480us
      DQ18B20 = 1;       //拉高
      delay_18B20(40);
}
uchar ds1820rd()/*读数据*/
{
  unsigned char i=0;
  unsigned char dat = 0;
  for (i=8;i>0;i--)
  {
      DQ18B20 = 0; //给脉冲信号
dat>>=1;
DQ18B20 = 1; //给脉冲信号
if(DQ18B20)
dat|=0x80;
delay_18B20(10);
  }
  return(dat);
}
void ds1820wr(uchar wdata)/*写数据*/
{
      unsigned char i=0;
for (i=8; i>0; i--)
{
         DQ18B20 = 0;
   DQ18B20 = wdata&0x01;
   delay_18B20(10);
   DQ18B20 = 1;
   wdata>>=1;
}
}
read_temp()/*读取温度值并转换*/
{
  uchar a,b;
  ds1820rst();
  ds1820wr(0xcc);//*跳过读序列号*/
  ds1820wr(0x44);//*启动温度转换*/
  ds1820rst();
  ds1820wr(0xcc);//*跳过读序列号*/
  ds1820wr(0xbe);//*读取温度*/
  a=ds1820rd();
  b=ds1820rd();
  tvalue=b;
  tvalue<<=8;
  tvalue=tvalue|a;
  if(tvalue<0x0fff)
   tflag=0;
  else
{
               tvalue=~tvalue+1;
               tflag=1;
}
  tvalue=tvalue*(0.625);//温度值扩大10倍，精确到1位小数
return(tvalue);
}
void ds1820disp()//温度值显示
{
      lcd_defcharacter8x16(24,0,1,(tvalue%1000/100),tab2);//显示温度的十位
      lcd_defcharacter8x16(25,0,1,(tvalue%1000%100/10),tab2);//显示温度的个位
      lcd_defcharacter8x16(27,0,1,(tvalue%1000%100%10),tab2);//显示温度的小数
      if(tflag==0)
               lcd_defcharacter8x16(23,0,1,12,tab2);//显示温度的+号
   else
            lcd_defcharacter8x16(23,0,1,11,tab2);//显示温度显-号
}
main()
{
      lcd_showfull(0);                                        //清屏
      init6963(); //初始化
      Init_DS1302();    //初始化1302
      lcd_defcharacter8x16(0,0,1,2,tab2);//显示 2-固定显示
      lcd_defcharacter8x16(1,0,1,0,tab2);//显示 0-固定显示
      lcd_defcharacter16x16(4,0,1,0,tab1);//显示年-固定显示
      lcd_defcharacter16x16(8,0,1,1,tab1);//显示月-固定显示
      lcd_defcharacter16x16(12,0,1,2,tab1);//显示日-固定显示
      lcd_defcharacter16x16(15,0,1,3,tab1);//显示星-固定显示
      lcd_defcharacter16x16(17,0,1,4,tab1);//显示期-固定显示
      lcd_defcharacter16x16(21,0,1,7,tab1);//显示 -固定显示温度计图片
      lcd_defcharacter8x16(26,0,1,10,tab2);//显示       -固定显示小数点.
      lcd_defcharacter16x16(28,0,1,6,tab1);//显示 -固定显示摄氏度图片
      lcd_defcharacter8x48(9,18,1,0,tab4);//显示-固定显示：（前两点）
      lcd_defcharacter8x48(20,18,1,0,tab4);//显示-固定显示：(后两点)

      //lcd_defcharacter16x16(21,16,2,17,tab1);//显示农历两个字
      //lcd_defcharacter16x16(25,16,1,19,tab1);//显示羊字
      //lcd_defcharacter16x16(27,16,1,20,tab1);//显示年字

while(1)
   {
         read_date();
         read_temp();//读取温度
         ds1820disp();//显示
      }
}

帐号		自动登录	找回密码
密码			立即注册

T6963的240128时钟运行不正常问题请教各位附单片机程序

正文摘要:

回复

T6963的240128时钟运行不正常问题请教各位 附单片机程序

正文摘要:

回复

T6963的240128时钟运行不正常问题请教各位附单片机程序