syntax error near 'sbit', expected 'hdata'

ID:952313 · 发表于 2021-7-23 15:36

ID:952313 · 发表于 2021-7-23 15:43

#ifndef _LCD12864_H_ #define _LCD12864_H_ #include <reg51.h> #define uint unsigned int #define uchar unsigned char #define lcd12864_D P0 sbit lcd12864_E = P2^2; sbit lcd12864_RS = P2^0; sbit lcd12864_RW = P2^1; sbit lcd12864_PSB = P2^4; sbit lcd12864_RST = P2^3; extern unsigned char com; extern unsigned char dat; extern unsigned char ms; void delayms(uint ms); void lcd12864_Com_write(uchar com); void lcd12864_Data_write(uchar dat); void lcd12864_display(uchar code *s); void lcd12864_Init(); #endif

ID:824490 · 发表于 2021-7-23 16:13

关键字“hdata”

ID:123289 · 发表于 2021-7-23 17:37

打开【lcd12864.h】看看，是不是不适合采用高端区（特殊寄存器）的位，或与之有矛盾。

帐号		自动登录	找回密码
密码			立即注册