STM32f103超详细资料

Hello friends
I have a development board Armjishu ver 1.1
I realized this uGui graphical interface is in the working phase

I have attached some photos with the development board and attached the application to those interested.

I hope you enjoy it and use it in your projects



Hello .If you encounter problems with touch operation,
you will need to correct these parameters as shown in the picture.

ArmJishu

Hello friends
I have a development board Armjishu ver 1.1
I realized this uGui graphical interface is in the working phase

I have attached some photos with the development board and attached the application to those interested.

I hope you enjoy it and use it in your projects

and a message to Admin if you can and in English the forum would be great

Hello friends
I have attached the optimized software for Alientek Warship ver 3 attached photo

Capacitive and resistive touch support depending on the type of lcd used.
This platform was the basis for other projects' achievements

Driver lcd alientek 3.0 ILI9341 / ILI9325 / RM68042 / RM68021 / ILI9320 / ILI9328 / LGDP4531 / LGDP4535 / SPFD5408 / 1505 / B505 / C505 / NT35310 / NT35510 / SSD1963

Touch driver ver 1.0  ADS7843 / 7846 / UH7843 / 7846 / XPT2046 / TSC2046 / OTT2001A / GT9147 / FT5206

For Alientek Warship hardware ver 3 we also made the Windows style version
I still have not resolved to create an account on my forum: openedv点com/thread-34751-1-1.html
so you can also post this version.
Given that it is for Alientek hardware.

As you read in the information included in the source code. The application is of an educational nature and can only be used for educational or personal purposes.
Can not be used for commercial purposes!
The description was fairly well presented inside the source code.

Hello friends
My initial project aims to create a 4-channel signal generator of various shapes and frequencies.
What can be used in different applications.
Also in this project I want to implement a logic analyzer with 4 channels for TTL signals
The oscilloscope part is for completing the set of elements used in a small electronics lab.

I have some of the applications I've done
but I still have to work on them.

Give suggestions I accept with pleasure

Hello friends

I hope you will use the application in your projects.
Thanks for appreciation!
The project is working and I will come with other applications ... within the time available.
I also recommend you to come up with various ideas or projects started and try to achieve something beautiful.

Success in project execution.

HW : ArmJishu vr1.1 / LCD 7inci
ucGUI Win style skin Human Machine Interface in progress

Hello friends

Who can help me with a source model for:
- Logic Analyzer for STM32F10x
- Can Bus detect ID external module
- Signal generator with different shapes and adjustable frequencies.

These applications will be integrated into the application presented here on the forum.
I'll update here.

Thanks for your participation.

In the application we added a new "CAN BUS" function and made the graphical menus from the signal generator and Can Network.

Hello friends
If you want more information about STM32F103ZET6 you can find here
网址.rar (122 Bytes, 下载次数: 18)

2019-5-10 04:13 上传

点击文件名下载附件
下载积分: 黑币 -5

shinker 发表于 2018-9-3 13:23
太赞了！

wuxie 发表于 2019-1-16 15:44
谢谢楼主

Hello

If you are interested in collaborating on this project, at the moment it works less to him because I am quite busy with other works.

But when I have some more time, I will continue the project.

Unfortunately, I can not access the Baidu host

but if you want to see what I've done, you can visit

地址: 网址.rar (171 Bytes, 下载次数: 13)

2019-5-10 04:12 上传

点击文件名下载附件
下载积分: 黑币 -5