Arduino加语音芯片硬件资料 控制多路电器源程序

Arduino用语音控制10多路电器硬件资料
Arduino 加语音控制芯片控制多路电器（程序见附件），注：语音芯片HLK-V20本身自带3路控制输出引脚，使用本程序能多控制了10多路电器。

1. #include <SoftwareSerial.h>
   
2. 
   
3. SoftwareSerial mySerial(2,3);
   
4. String receive_data;
   
5. 
   
6. void setup(){
   
7.   mySerial.begin(115200);
   
8.   Serial.begin(115200);
   
9.   receive_data = "";
   
10.   pinMode(4, OUTPUT);
    
11.   pinMode(5, OUTPUT);
    
12.   pinMode(6, OUTPUT);
    
13.   pinMode(7, OUTPUT);
    
14.   pinMode(8, OUTPUT);
    
15.   pinMode(9, OUTPUT);
    
16.   pinMode(10, OUTPUT);
    
17.   pinMode(11, OUTPUT);
    
18.   pinMode(12, OUTPUT);
    
19.   pinMode(13, OUTPUT);
    
20. }
    
21. 
    
22. void loop(){
    
23.   while (mySerial.available() > 0) {
    
24.     receive_data = String(receive_data) + String(char(mySerial.read()));
    
25.   }
    
26.   if (String(receive_data).indexOf(String("dakainuanqi")) != -1) {
    
27.     digitalWrite(4,HIGH);
    
28.     Serial.println("打开暖气");
    
29.     receive_data = "";
    
30. 
    
31.   } else if (String(receive_data).indexOf(String("guanbinuanq")) != -1) {
    
32.     digitalWrite(4,LOW);
    
33.     Serial.println("关闭暖气");
    
34.     receive_data = "";
    
35.   }
    
36.   if (String(receive_data).indexOf(String("dakaicfeng")) != -1) {
    
37.     digitalWrite(5,HIGH);
    
38.     Serial.println("打开吹风");
    
39.     receive_data = "";
    
40. 
    
41.   } else if (String(receive_data).indexOf(String("guanbicfeng")) != -1) {
    
42.     digitalWrite(5,LOW);
    
43.     Serial.println("关闭吹风");
    
44.     receive_data = "";
    
45.   }
    
46.   if (String(receive_data).indexOf(String("dakdianfangbao")) != -1) {
    
47.     digitalWrite(6,HIGH);
    
48.     Serial.println("打开电饭煲");
    
49.     receive_data = "";
    
50. 
    
51.   } else if (String(receive_data).indexOf(String("guabdianfangbao")) != -1) {
    
52.     digitalWrite(6,LOW);
    
53.     Serial.println("关闭电饭煲");
    
54.     receive_data = "";
    
55.   }
    
56.   if (String(receive_data).indexOf(String("turnon")) != -1) {
    
57.     digitalWrite(7,HIGH);
    
58.     Serial.println("打开台灯");
    
59.     receive_data = "";
    
60. 
    
61.   } else if (String(receive_data).indexOf(String("turnoff")) != -1) {
    
62.     digitalWrite(7,LOW);
    
63.     Serial.println("关闭台灯");
    
64.     receive_data = "";
    
65.   }
    
66.   if (String(receive_data).indexOf(String("openElectricfan")) != -1) {
    
67.     digitalWrite(8,HIGH);
    
68.     Serial.println("打开风扇");
    
69.     receive_data = "";
    
70. 
    
71.   } else if (String(receive_data).indexOf(String("closElectricfan")) != -1) {
    
72.     digitalWrite(8,LOW);
    
73.     Serial.println("关闭风扇");
    
74.     receive_data = "";
    
75.   }
    
76.   if (String(receive_data).indexOf(String("openled")) != -1) {
    
77.     digitalWrite(9,HIGH);
    
78.     Serial.println("开灯");
    
79.     receive_data = "";
    
80. 
    
81.   } else if (String(receive_data).indexOf(String("closeled")) != -1) {
    
82.     digitalWrite(9,LOW);
    
83.     Serial.println("关灯");
    
84.     receive_data = "";
    
85.   }
    
86.   if (String(receive_data).indexOf(String("dakaiyuba")) != -1) {
    
87.     digitalWrite(10,HIGH);
    
88.     Serial.println("打开浴霸");
    
89.     receive_data = "";
    
90. 
    
91.   } else if (String(receive_data).indexOf(String("guanbiyuba")) != -1) {
    
92.     digitalWrite(10,LOW);
    
93.     Serial.println("关闭浴霸");
    
94.     receive_data = "";
    
95.   }
    
96.   if (String(receive_data).indexOf(String("dakaizaoming")) != -1) {
    
97.     digitalWrite(11,HIGH);
    
98.     Serial.println("打开照明");
    
99.     receive_data = "";
    
100. 
     
101.   } else if (String(receive_data).indexOf(String("guanbizhaoming")) != -1) {
     
102.     digitalWrite(11,LOW);
     
103.     Serial.println("关闭照明");
     
104.     receive_data = "";
     
105.   }
     
106.   if (String(receive_data).indexOf(String("dakaiyingsji")) != -1) {
     
107.     digitalWrite(12,HIGH);
     
108.     Serial.println("打开饮水机");
     
109.     receive_data = "";
     
110. 
     
111.   } else if (String(receive_data).indexOf(String("guanbiyingsji")) != -1) {
     
112.     digitalWrite(12,LOW);
     
113.     Serial.println("关闭饮水机");
     
114.     receive_data = "";
     
115.   }
     
116.   if (String(receive_data).indexOf(String("kaishichus")) != -1) {
     
117.     digitalWrite(13,HIGH);
     
118.     Serial.println("开始出水");
     
119.     receive_data = "";
     
120. 
     
121.   } else if (String(receive_data).indexOf(String("tingzchus")) != -1) {
     
122.     digitalWrite(13,LOW);
     
123.     Serial.println("停止出水");
     
124.     receive_data = "";
     
125.   }
     
126.   if (String(receive_data).indexOf(String("zengjialiangdu")) != -1) {
     
127.     pinMode(A0, OUTPUT);
     
128.     digitalWrite(A0,HIGH);
     
129.     Serial.println("增加亮度");
     
130.     receive_data = "";
     
131. 
     
132.   } else if (String(receive_data).indexOf(String("jianxiaoliangdu")) != -1) {
     
133.     pinMode(A0, OUTPUT);
     
134.     digitalWrite(A0,LOW);
     
135.     Serial.println("减小亮度");
     
136.     receive_data = "";
     
137.   }
     
138.   if (String(receive_data).indexOf(String("settiConehonor")) != -1) {
     
139.     pinMode(A2, OUTPUT);
     
140.     digitalWrite(A2,HIGH);
     
141.     Serial.println("一小时后开机");
     
142.     receive_data = "";
     
143. 
     
144.   } else if (String(receive_data).indexOf(String("settiOonehonor")) != -1) {
     
145.     pinMode(A2, OUTPUT);
     
146.     digitalWrite(A2,LOW);
     
147.     Serial.println("一小时后关机");
     
148.     receive_data = "";
     
149.   }
     
150.   if (String(receive_data).indexOf(String("shenggaowendu")) != -1) {
     
151.     pinMode(A3, OUTPUT);
     
152.     digitalWrite(A3,HIGH);
     
153.     Serial.println("升高温度");
     
154.     receive_data = "";
     
155. 
     
156.   } else if (String(receive_data).indexOf(String("jiandiwendu")) != -1) {
     
157.     pinMode(A3, OUTPUT);
     
158.     digitalWrite(A3,LOW);
     
159.     Serial.println("降低温度");
     
160.     receive_data = "";
     
161.   }
     
162.   if (String(receive_data).indexOf(String("AdjustGearmax")) != -1) {
     
163.     pinMode(A4, OUTPUT);
     
164.     digitalWrite(A4,HIGH);
     
165.     Serial.println("风速调到最大");
     
166.     receive_data = "";
     
167. 
     
168.   } else if (String(receive_data).indexOf(String("AdjustGearmin")) != -1) {
     
169.     pinMode(A1, OUTPUT);
     
170.     digitalWrite(A1,LOW);
     
171.     Serial.println("风速调到最小");
     
172.     receive_data = "";
     
173.   }
     
174.   if (String(receive_data).indexOf(String("volumeUpUni")) != -1) {
     
175.     pinMode(A5, OUTPUT);
     
176.     digitalWrite(A5,HIGH);
     
177.     Serial.println("增大音量");
     
178.     receive_data = "";
     
179. 
     
180.   } else if (String(receive_data).indexOf(String("volumeDownUni")) != -1) {
     
181.     pinMode(A2, OUTPUT);
     
182.     digitalWrite(A2,LOW);
     
183.     Serial.println("减小音量");
     
184.     receive_data = "";
     
185.   }
     
186. 
     
187. }
     

复制代码

HLK-V20 Demo固件命令词与播报词 V1.1.xlsx.7z (12.64 KB, 下载次数: 27)

2020-9-25 16:07 上传

点击文件名下载附件
下载积分: 黑币 -5

好哇，一直都想把这个模块用起来，感谢大佬的分享