msp430单片机rc522射频的程序和与电路图

ID:435493 · 发表于 2018-11-29 09:42

rc522射频刷卡

单片机源程序如下:

#include <msp430x41x.h>
#include "main.h"
#include "mfrc522.h"
#pragma memory = constseg(TAB)
unsigned char data1[16] = {0x12,0x34,0x56,0x78,0xED,0xCB,0xA9,0x87,0x12,0x34,0x56,0x78,0x01,0xFE,0x01,0xFE};
//M1卡的某一块写为如下格式，则该块为钱包，可接收扣款和充值命令
//4字节金额（低字节在前）＋4字节金额取反＋4字节金额＋1字节块地址＋1字节块地址取反＋1字节块地址＋1字节块地址取反
unsigned char data2[4] = {0x12,0,0,0};
unsigned char DefaultKey[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
#pragma memory=default
unsigned char g_ucTempbuf[20];
void main(void)
{
unsigned char status;
InitializeSystem();
PcdReset();
PcdAntennaOff();
PcdAntennaOn();
while ( 1 )
{
status = PcdRequest(PICC_REQALL, g_ucTempbuf);
if (status != MI_OK)
{
LED_GREEN_OFF;
continue;
}
LED_GREEN_ON; //检测到有卡存在
status = PcdAnticoll(g_ucTempbuf);
if (status != MI_OK)
{ continue; }
status = PcdSelect(g_ucTempbuf);
if (status != MI_OK)
{ continue; }
status = PcdAuthState(PICC_AUTHENT1A, 1, DefaultKey, g_ucTempbuf);
if (status != MI_OK)
{ continue; }
status = PcdWrite(1, data1);
if (status != MI_OK)
{ continue; }
status = PcdValue(PICC_DECREMENT,1,data2);
if (status != MI_OK)
{ continue; }
status = PcdBakValue(1, 2);
if (status != MI_OK)
{ continue; }
status = PcdRead(2, g_ucTempbuf);
if (status != MI_OK)
{ continue; }
PcdHalt();
}
}
/////////////////////////////////////////////////////////////////////
//功能：系统初始化
/////////////////////////////////////////////////////////////////////
void InitializeSystem(void)
{
WDTCTL = WDTPW + WDTHOLD; //Stop watchdog timer
_DINT();
P1DIR = 0xE8;
P1OUT = 0xFF;
P6DIR = 0x08;
P6OUT = 0xFF;
}

复制代码

所有资料51hei提供下载:

51单片机rc522 射频的程序和与电路图.rar (2.66 MB, 下载次数: 24)

帐号		自动登录	找回密码
密码			立即注册