[已解决]小白求助关于一个51单片机报错问题折腾了一下午

ID:1010171 · 发表于 2024-11-25 18:34

开始我的程序没有报错可是当我把另外一个程序放到我的程序里面就会显示这个错误
还请各位大佬判断一下怎么回事加入的是

Build target 'Target 1'
linking...
*** ERROR L104: MULTIPLE PUBLIC DEFINITIONS
SYMBOL:  _DELAY_MS
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
*** WARNING L1: UNRESOLVED EXTERNAL SYMBOL
SYMBOL:  _SENDSTRING
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
*** WARNING L1: UNRESOLVED EXTERNAL SYMBOL
SYMBOL:  UART_INIT
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
*** WARNING L1: UNRESOLVED EXTERNAL SYMBOL
SYMBOL:  REC_BUF
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
*** WARNING L1: UNRESOLVED EXTERNAL SYMBOL
SYMBOL:  CLR_BUF
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
*** WARNING L2: REFERENCE MADE TO UNRESOLVED EXTERNAL
SYMBOL:  UART_INIT
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
ADDRESS: 1433H
*** WARNING L2: REFERENCE MADE TO UNRESOLVED EXTERNAL
SYMBOL:  CLR_BUF
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
ADDRESS: 0F26H
*** WARNING L2: REFERENCE MADE TO UNRESOLVED EXTERNAL
SYMBOL:  _SENDSTRING
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
ADDRESS: 0F47H
*** WARNING L2: REFERENCE MADE TO UNRESOLVED EXTERNAL
SYMBOL:  REC_BUF
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
ADDRESS: 0FB3H
*** WARNING L2: REFERENCE MADE TO UNRESOLVED EXTERNAL
SYMBOL:  REC_BUF
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
ADDRESS: 0FB5H
*** WARNING L2: REFERENCE MADE TO UNRESOLVED EXTERNAL
SYMBOL:  CLR_BUF
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
ADDRESS: 0FBFH
*** WARNING L2: REFERENCE MADE TO UNRESOLVED EXTERNAL
SYMBOL:  CLR_BUF
MODULE:  .\Objects\DUANXIN.obj (DUANXIN)
ADDRESS: 0FDAH
Program Size: data=9.0 xdata=149 code=6735
Target not created.
Build Time Elapsed:  00:00:00

ID:161164 · 发表于 2024-11-25 23:14

请提供代码

ID:277550 · 发表于 2024-11-26 09:42

MULTIPLE PUBLIC DEFINITIONS
重复引用头文件

UNRESOLVED EXTERNAL SYMBOL
估计是缺少.h头文件、.c文件

ID:384109 · 发表于 2024-11-26 09:54

重复定义

ID:961114 · 发表于 2024-11-26 10:50

你去看免费教程跟着老师一步步的敲代码
《Ai8051U深度入门到32位51大型实战视频——带你从0开始学Ai8051U单片机》3.点亮第一个LED_哔哩哔哩_bilibili https://www.bilibili.com/video/B ... 229259e6d079df11d14

ID:1109793 · 发表于 2024-11-26 11:22

STC庄伟发表于 2024-11-26 10:50
你去看免费教程跟着老师一步步的敲代码
《Ai8051U深度入门到32位51大型实战视频——带你从0开始学Ai80 ...

只能看30秒

ID:1010171 · 发表于 2024-11-27 11:26

人中狼发表于 2024-11-26 09:54
重复定义

感谢是重复定义了

帐号		自动登录	找回密码
密码			立即注册