8X8X8光立方制作教程附原理图程序单片机+洞洞板+573+ULN2803

ID:99624 · 发表于 2015-12-25 23:04

全部8X8X8光立方制作教程资料电路原理图源程序下载：

洞洞板光立方.rar (6.52 MB, 下载次数: 951)

2015-12-26 00:19 上传

点击文件名下载附件

洞洞板光立方视频演示1：

洞洞板光立方视频演示2：

WH}VK0D3F2Q}}GZA~IZM.jpg

灯可向左，也可向上，如果想向上，灯的叫就按照图片来扭，如果想向左，就按另一组图片来扭;还有，要注意防静电，焊接一部分灯后要逐个测试好坏，注意看好灯的极性在焊接，看灯体里面，大块有个盘的是负极，另外的是正极
本光立方才用的是层共阴，束共阳的接法，接出来就有64个阳极，8个阴极
有什么不懂得可以直接问我：大家一起学习交流资料只供参考借鉴
最后祝大家成功

[C2@P)~4W}T[RELZ5EN[~$W.jpg

下面是本8X8X8光立方制作的源程序：

#include <REG52.H>
#include <intrins.h>
#define uchar unsigned char
#define uint unsigned int
uchar display[8][8];
/*rank:A,1,2,3,4,I,心,U*/
uchar code table_cha[8][8]={0x51,0x51,0x51,0x4a,0x4a,0x4a,0x44,0x44,0x18,0x1c,0x18,0x18,0x18,0x18,0x18,0x3c,0x3c,0x66,0x66,0x30,0x18,0xc,0x6,0xf6,0x3c,0x66,0x60,0x38,0x60,0x60,0x66,0x3c,0x30,0x38,0x3c,0x3e,0x36,0x7e,0x30,0x30,0x3c,0x3c,0x18,0x18,0x18,0x18,0x3c,0x3c,0x66,0xff,0xff,0xff,0x7e,0x3c,0x18,0x18,0x66,0x66,0x66,0x66,0x66,0x66,0x7e,0x3c};
/*the "ideasoft"*/
uchar code table_id[40]={0x81,0xff,0x81,0x00,0xff,0x81,0x81,0x7e,0x00,0xff,0x89,0x89,0x00,0xf8,0x27,0x27,0xf8,0x00,0x8f,0x89,0x89,0xf9,0x00,0xff,0x81,0x81,0xff,0x00,0xff,0x09,0x09,0x09,0x01,0x0,0x01,0x01,0xff,0x01,0x01,0x00};
/*railway*/
uchar code dat[128]={0x0,0x20,0x40,0x60,0x80,0xa0,0xc0,0xe0,0xe4,0xe8,0xec,0xf0,0xf4,0xf8,0xfc,0xdc,0xbc,0x9c,0x7c,0x5c,0x3c,0x1c,0x18,0x14,0x10,0xc,0x8,0x4,0x25,0x45,0x65,0x85,0xa5,0xc5,0xc9,0xcd,0xd1,0xd5,0xd9,0xb9,0x99,0x79,0x59,0x39,0x35,0x31,0x2d,0x29,0x4a,0x6a,0x8a,0xaa,0xae,0xb2,0xb6,0x96,0x76,0x56,0x52,0x4e,0x6f,0x8f,0x93,0x73,0x6f,0x8f,0x93,0x73,0x4a,0x6a,0x8a,0xaa,0xae,0xb2,0xb6,0x96,0x76,0x56,0x52,0x4e,0x25,0x45,0x65,0x85,0xa5,0xc5,0xc9,0xcd,0xd1,0xd5,0xd9,0xb9,0x99,0x79,0x59,0x39,0x35,0x31,0x2d,0x29,0x0,0x20,0x40,0x60,0x80,0xa0,0xc0,0xe0,0xe4,0xe8,0xec,0xf0,0xf4,0xf8,0xfc,0xdc,0xbc,0x9c,0x7c,0x5c,0x3c,0x1c,0x18,0x14,0x10,0xc,0x8,0x4};
/*railway 2*/
uchar code dat2[28]={0x0,0x20,0x40,0x60,0x80,0xa0,0xc0,0xe0,0xe4,0xe8,0xec,0xf0,0xf4,0xf8,0xfc,0xdc,0xbc,0x9c,0x7c,0x5c,0x3c,0x1c,0x18,0x14,0x10,0xc,0x8,0x4};
/*railway 3*/
uchar code dat3[24]={0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x16,0x26,0x36,0x46,0x56,0x66,0x65,0x64,0x63,0x62,0x61,0x60,0x50,0x40,0x30,0x20,0x10};
/*3p char*/
uchar code table_3p[3][8]={0xff,0x89,0xf5,0x93,0x93,0xf5,0x89,0xff,0x0e,0x1f,0x3f,0x7e,0x7e,0x3f,0x1f,0x0e,0x18,0x3c,0x7e,0xff,0x18,0x18,0x18,0x18};
/*initializtion
That is to initialize the program .
It is write to set the timer in c52 mcu.
So the program can renovate the led_3d_cube in fixed time use the interrupt function.*/
void sinter()
{
IE=0x82;
TCON=0x01;
TH0=0xc0;
TL0=0;
TR0=1;
}
void delay5us(void) //误差 -0.026765046296us STC 1T 22.1184Mhz
{
unsigned char a,b;
for(b=7;b>0;b--)
for(a=2;a>0;a--);
}
void delay(uint i)
{
while (i--){
delay5us();}//12t的mcu 注释这个延时即可
}
/*To judge the num bit*/
uchar judgebit(uchar num,uchar b)
{
char n;
num=num&(1<<b);
if (num)
n=1;
else
n=0;
return n;
}
/*To figure out the round number*/
uchar abs(uchar a)
{
uchar b;
b=a/10;
a=a-b*10;
if (a>=5)
b++;
return b;
}
/*To figure out the absolute value*/
uchar abss(char a)
{
if (a<0)
a=-a;
return a;
}
/*The function can comparat the character.
And remove the big one to the back.*/
void max(uchar *a,uchar *b)
{
uchar t;
if ((*a)>(*b))
{
t=(*a);
(*a)=(*b);
(*b)=t;
}
}
/*The function is to figure out the max number and return it.*/
uchar maxt(uchar a,uchar b,uchar c)
{
if (a<b)
a=b;
if (a<c)
a=c;
return a;
}
void clear(char le)
{
uchar i,j;
for (j=0;j<8;j++)
{
for (i=0;i<8;i++)
display[j][i]=le;
}
}
void trailler(uint speed)
{
char i,j;
for (i=6;i>=-3;i--)
{
if (i>=0)
{
for (j=0;j<8;j++)
display[j][i]=display[j][i+1];
}
if (i<4)
{
for (j=0;j<8;j++)
display[j][i+4]=0;
}
delay(speed);
}
}
void point(uchar x,uchar y,uchar z,uchar le)
{
uchar ch1,ch0;
ch1=1<<x;
ch0=~ch1;
if (le)
display[z][y]=display[z][y]|ch1;
else
display[z][y]=display[z][y]&ch0;
}
void type(uchar cha,uchar y)
{
uchar xx;
for (xx=0;xx<8;xx++)
{
display[xx][y]=table_cha[cha][xx];
}
}
/*The first variable is the distance from the midpoint.
The second is the layer.
the third is the flash speed of the time between each two point.
The forth is the enable io,it controls weather draw or claen.*/
void cirp(char cpp,uchar dir,uchar le)
{
uchar a,b,c,cp;
if ((cpp<128)&(cpp>=0))
{
if (dir)
cp=127-cpp;
else
cp=cpp;
a=(dat[cp]>>5)&0x07;
b=(dat[cp]>>2)&0x07;
c=dat[cp]&0x03;
if (cpp>63)
c=7-c;
point (a,b,c,le);
}
}
void line(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,uchar le)
{
char t,a,b,c,a1,b1,c1,i;
a1=x2-x1;
b1=y2-y1;
c1=z2-z1;
t=maxt(abss(a1),abss(b1),abss(c1));
a=x1*10;
b=y1*10;
c=z1*10;
a1=a1*10/t;
b1=b1*10/t;
c1=c1*10/t;
for (i=0;i<t;i++)
{
point(abs(a),abs(b),abs(c),le);
a+=a1;
b+=b1;
c+=c1;
}
point(x2,y2,z2,le);
}
void box(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,uchar fill,uchar le)
{
uchar i,j,t=0;
max(&x1,&x2);
max(&y1,&y2);
max(&z1,&z2);
for (i=x1;i<=x2;i++)
t|=1<<i;
if (!le)
t=~t;
if (fill)
{
if (le)
{
for (i=z1;i<=z2;i++)
{
for (j=y1;j<=y2;j++)
display[j][i]|=t;
}
}
else
{
for (i=z1;i<=z2;i++)
{
for (j=y1;j<=y2;j++)
display[j][i]&=t;
}
}
}
else
{
if (le)
{
display[y1][z1]|=t;
display[y2][z1]|=t;
display[y1][z2]|=t;
display[y2][z2]|=t;
}
else
{
display[y1][z1]&=t;
display[y2][z1]&=t;
display[y1][z2]&=t;
display[y2][z2]&=t;
}
t=(0x01<<x1)|(0x01<<x2);
if (!le)
t=~t;
if (le)
{
for (j=z1;j<=z2;j+=(z2-z1))
{
for (i=y1;i<=y2;i++)
display[i][j]|=t;
}
for (j=y1;j<=y2;j+=(y2-y1))
{
for (i=z1;i<=z2;i++)
display[j][i]|=t;
}
}
else
{
for (j=z1;j<=z2;j+=(z2-z1))
{
for (i=y1;i<=y2;i++)
{
display[i][j]&=t;
}
}
for (j=y1;j<=y2;j+=(y2-y1))
{
for (i=z1;i<=z2;i++)
{
display[j][i]&=t;
}
}
}
}
}
void box_apeak_xy(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,uchar fill,uchar le)
{
uchar i;
max(&z1,&z2);
if (fill)
{
for (i=z1;i<=z2;i++)
{
line (x1,y1,i,x2,y2,i,le);
}
}
else
{
line (x1,y1,z1,x2,y2,z1,le);
line (x1,y1,z2,x2,y2,z2,le);
line (x2,y2,z1,x2,y2,z2,le);
line (x1,y1,z1,x1,y1,z2,le);
}
}
void poke(uchar n,uchar x,uchar y)
{
uchar i;
for (i=0;i<8;i++)
{
point(x,y,i,judgebit(n,i));
}
}
void boxtola(char i,uchar n)
{
if ((i>=0)&(i<8))
{
poke(n,0,7-i);
}
if ((i>=8)&(i<16))
{
poke(n,i-8,0);
}
if ((i>=16)&(i<24))
{
poke(n,7,i-16);
}
}
void rolldisplay(uint speed)
{
uchar j;
char i,a;
for (i=23;i>-40;i--)
{
for (j=0;j<40;j++)
{
a=i+j;
if ((a>=0)&(a<24))
boxtola(a,table_id[j]);
}
delay(speed);
}
}
void roll_apeak_yz(uchar n,uint speed)
{
uchar i;
switch(n)
{
case 1:
for (i=0;i<7;i++)
{
display[i][7]=0;
display[7][6-i]=255;
delay(speed);
};
break;
case 2:
for (i=0;i<7;i++)
{
display[7][7-i]=0;
display[6-i][0]=255;
delay(speed);
};
break;
case 3:
for (i=0;i<7;i++)
{
display[7-i][0]=0;
display[0][i+1]=255;
delay(speed);
};
break;
case 0:
for (i=0;i<7;i++)
{
display[0][i]=0;
display[i+1][7]=255;
delay(speed);
};
}
}
void roll_apeak_xy(uchar n,uint speed)
{
uchar i;
switch(n)
{
case 1:
for (i=0;i<7;i++)
{
line(0,i,0,0,i,7,0);
line(i+1,7,0,i+1,7,7,1);
delay(speed);
};
break;
case 2:
for (i=0;i<7;i++)
{
line(i,7,0,i,7,7,0);
line(7,6-i,0,7,6-i,7,1);
delay(speed);
};
break;
case 3:
for (i=0;i<7;i++)
{
line(7,7-i,0,7,7-i,7,0);
line(6-i,0,0,6-i,0,7,1);
delay(speed);
};
break;
case 0:
for (i=0;i<7;i++)
{
line(7-i,0,0,7-i,0,7,0);
line(0,i+1,0,0,i+1,7,1);
delay(speed);
};
}
}
void roll_3_xy(uchar n,uint speed)
{
uchar i;
switch(n)
{
case 1:
for (i=0;i<8;i++)
{
box_apeak_xy (0,i,0,7,7-i,7,1,1);
delay(speed);
if (i<7)
box_apeak_xy (3,3,0,0,i,7,1,0);
};
break;
case 2:
for (i=0;i<8;i++)
{
box_apeak_xy (7-i,0,0,i,7,7,1,1);
delay(speed);
if (i<7)
box_apeak_xy (3,4,0,i,7,7,1,0);
};
break;
case 3:
for (i=0;i<8;i++)
{
box_apeak_xy (0,i,0,7,7-i,7,1,1);
delay(speed);
if (i<7)
box_apeak_xy (4,4,0,7,7-i,7,1,0);
};
break;
case 0:
for (i=0;i<8;i++)
{
box_apeak_xy (7-i,0,0,i,7,7,1,1);
delay(speed);
if (i<7)
box_apeak_xy (4,3,0,7-i,0,7,1,0);
};
}
}
void trans(uchar z,uint speed)
{
uchar i,j;
for (j=0;j<8;j++)
{
for (i=0;i<8;i++)
{
display[z][i]>>=1;
}
delay(speed);
}
}
void tranoutchar(uchar c,uint speed)
{
uchar i,j,k,a,i2=0;
for (i=0;i<8;i++)
{
if (i<7)
box_apeak_xy (i+1,0,0,i+1,7,7,1,1);
box_apeak_xy (i2,0,0,i2,7,7,1,0);
a=0;
i2=i+1;
for (j=0;j<=i;j++)
{
a=a|(1<<j);
}
for (k=0;k<8;k++)
{
display[k][3]|=table_cha[c][k]&a;
display[k][4]|=table_cha[c][k]&a;
}
delay(speed);
}
}
void transss()
{
uchar i,j;
for (i=0;i<8;i++)
{
for (j=0;j<8;j++)
display[i][j]<<=1;
}
}
/*From now on,the function below is to display the flash.*/
void flash_1()
{
clear(0);
type(1,0);
delay(60000);
type(2,0);
delay(60000);
type(3,0);
delay(60000);
type(4,0);
delay(60000);
delay(60000);
clear(0);
rolldisplay(30000);
type(0,7);
delay(60000);
trailler(6000);
delay(60000);
}
void flash_2()
{
uchar i;
for (i=129;i>0;i--)
{
cirp(i-2,0,1);
delay(8000);
cirp(i-1,0,0);
}
delay(8000);
for (i=0;i<136;i++)
{
cirp(i,1,1);
delay(8000);
cirp(i-8,1,0);
}
delay(8000);
for (i=129;i>0;i--)
{
cirp(i-2,0,1);
delay(8000);
}
delay(8000);
for (i=0;i<128;i++)
{
cirp(i-8,1,0);
delay(8000);
}
delay(60000);
}
void flash_3()
{
char i;
for (i=0;i<8;i++)
{
box_apeak_xy(0,i,0,7,i,7,1,1);
delay(20000);
if (i<7)
box_apeak_xy(0,i,0,7,i,7,1,0);
}
for (i=7;i>=0;i--)
{
box_apeak_xy(0,i,0,7,i,7,1,1);
delay(20000);
if (i>0)
box_apeak_xy(0,i,0,7,i,7,1,0);
}
for (i=0;i<8;i++)
{
box_apeak_xy(0,i,0,7,i,7,1,1);
delay(20000);
if (i<7)
box_apeak_xy(0,i,0,7,i,7,1,0);
}
}
void flash_4()
{
char i,j,an[8];
for (j=7;j<15;j++)
an[j-7]=j;
for (i=0;i<=16;i++)
{
for (j=0;j<8;j++)
{
if ((an[j]<8)&(an[j]>=0))
line(0,an[j],j,7,an[j],j,1);
}
for (j=0;j<8;j++)
{
if (((an[j]+1)<8)&(an[j]>=0))
line(0,an[j]+1,j,7,an[j]+1,j,0);
}
for (j=0;j<8;j++)
{
if (an[j]>0)
an[j]--;
}
delay(15000);
}
for (j=0;j<8;j++)
an[j]=1-j;
for (i=0;i<=16;i++)
{
for (j=0;j<8;j++)
{
if ((an[j]<8)&(an[j]>=0))
line(0,an[j],j,7,an[j],j,1);
}
for (j=0;j<8;j++)
{
if (((an[j]-1)<7)&(an[j]>0))
line(0,an[j]-1,j,7,an[j]-1,j,0);
}
for (j=0;j<8;j++)
{
if (an[j]<7)
an[j]++;
}
delay(15000);
}
}
void flash_5()
{
uint a=15000;//a=delay
char i=8,j,an[4];
//1
for (j=7;j<11;j++)
an[j-7]=j;
while(i--)
{
for (j=0;j<4;j++)
{
if (an[j]<8)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]<7)
box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (an[j]>3)
an[j]--;
}
delay(a);
}
//2
i=3;
for (j=0;j<4;j++)
an[j]=5-j;
while(i--)
{
for (j=1;j<4;j++)
{
if (an[j]<4)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]<3)
box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (an[j]>0)
an[j]--;
}
delay(a);
}
//3
i=3;
for (j=1;j<4;j++)
an[j]=4-j;
while(i--)
{
for (j=1;j<4;j++)
{
if (an[j]>=0)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]>0)
box_apeak_xy(j,an[j]-1,j,7-j,an[j]-1,7-j,0,0);
}
for (j=1;j<4;j++)
{
if (an[j]<3)
an[j]++;
}
delay(a);
}
//4
i=3;
for (j=0;j<4;j++)
an[j]=j+1;
while(i--)
{
for (j=1;j<4;j++)
{
if (an[j]>3)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]>3)
box_apeak_xy(j,an[j]-1,j,7-j,an[j]-1,7-j,0,0);
}
for (j=0;j<4;j++)
an[j]++;
delay(a);
}
//5
i=3;
for (j=3;j<6;j++)
an[j-2]=j;
while(i--)
{
for (j=1;j<4;j++)
{
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (an[j]>3)
an[j]--;
}
delay(a);
}
//6
i=3;
for (j=0;j<4;j++)
an[j]=5-j;
while(i--)
{
for (j=1;j<4;j++)
{
if (an[j]<4)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]<3)
box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (an[j]>0)
an[j]--;
}
delay(a);
}
//7
i=3;
for (j=0;j<4;j++)
an[j]=3-j;
an[0]=2;
while(i--)
{
for (j=0;j<3;j++)
{
if (an[j]>=0)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]>=0)
box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (j<5-i)
an[j]--;
}
delay(a);
}
//8
i=10;
for (j=0;j<4;j++)
an[j]=j-2;
while(i--)
{
for (j=0;j<4;j++)
{
if (an[j]>=0)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]>=0)
box_apeak_xy(j,an[j]-1,j,7-j,an[j]-1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (an[j]<7)
an[j]++;
}
delay(a);
}
}
void flash_6()
{
uchar i,j,k,z;
roll_apeak_yz(1,10000);
roll_apeak_yz(2,10000);
roll_apeak_yz(3,10000);
roll_apeak_yz(0,10000);
roll_apeak_yz(1,10000);
roll_apeak_yz(2,10000);
roll_apeak_yz(3,10000);
for (i=0;i<3;i++)
{
for (j=0;j<8;j++)
{
for (k=0;k<8;k++)
{
if ((table_3p[i][j]>>k)&1)
{
for (z=1;z<8;z++)
{
point (j,7-k,z,1);
if (z-1)
point (j,7-k,z-1,0);
delay(5000);
}
}
}
}
trans(7,15000);
}
}
void flash_7()
{
uchar i;
uint a=3000;
roll_apeak_yz(0,10000);
roll_apeak_yz(1,10000);
roll_apeak_yz(2,10000);
roll_apeak_yz(3,10000);
roll_apeak_yz(0,10000);
roll_apeak_yz(1,10000);
roll_apeak_yz(2,10000);
roll_apeak_yz(3,10000);
roll_apeak_yz(0,10000);
roll_apeak_yz(1,10000);
roll_apeak_yz(2,10000);
roll_apeak_xy(0,10000);
roll_apeak_xy(1,10000);
roll_apeak_xy(2,10000);
roll_apeak_xy(3,10000);
roll_apeak_xy(0,10000);
roll_apeak_xy(1,10000);
roll_apeak_xy(2,10000);
roll_apeak_xy(3,10000);
for (i=0;i<8;i++)
{
box_apeak_xy (0,i,0,7-i,i,7,1,1);
delay(a);
}
delay(30000);
roll_3_xy(0,a);
delay(30000);
roll_3_xy(1,a);
delay(30000);
roll_3_xy(2,a);
delay(30000);
roll_3_xy(3,a);
delay(30000);
roll_3_xy(0,a);
delay(30000);
roll_3_xy(1,a);
delay(30000);
roll_3_xy(2,a);
delay(30000);
roll_3_xy(3,a);
for (i=7;i>0;i--)
{
box_apeak_xy(i,0,0,i,7,7,1,0);
delay(a);
}
}
void flash_8()
{
uchar i;
for (i=5;i<8;i++)
{
tranoutchar(i,10000);
delay(60000);
delay(60000);
}
}
void flash_9()
{
char i;
uchar j,an[8],x,y,t,x1,y1;
for (i=0;i<8;i++)
{
box_apeak_xy (i,0,0,i,7,7,1,1);
if (i)
box_apeak_xy (i-1,0,0,i-1,7,7,1,0);
delay(10000);
}
roll_apeak_xy(3,10000);
roll_apeak_xy(0,10000);
roll_apeak_xy(1,10000);
for (i=0;i<7;i++)
{
line(6-i,6-i,0,6-i,6-i,7,1);
line(i,7,0,i,7,7,0);
delay(10000);
}
for (i=0;i<8;i++)
an[i]=14;
for (i=0;i<85;i++)
{
clear(0);
for (j=0;j<8;j++)
{
t=an[j]%28;
x=dat2[t]>>5;
y=(dat2[t]>>2)&0x07;
t=(an[j]-14)%28;
x1=dat2[t]>>5;
y1=(dat2[t]>>2)&0x07;
line(x,y,j,x1,y1,j,1);
}
for (j=0;j<8;j++)
{
if ((i>j)&(j>i-71))
an[j]++;
}
delay(5000);
}
for (i=0;i<85;i++)
{
clear(0);
for (j=0;j<8;j++)
{
t=an[j]%28;
x=dat2[t]>>5;
y=(dat2[t]>>2)&0x07;
t=(an[j]-14)%28;
x1=dat2[t]>>5;
y1=(dat2[t]>>2)&0x07;
line(x,y,j,x1,y1,j,1);
}
for (j=0;j<8;j++)
{
if ((i>j)&(j>i-71))
an[j]--;
}
delay(5000);
}
for (i=0;i<29;i++)
{
clear(0);
t=an[0]%28;
x=dat2[t]>>5;
y=(dat2[t]>>2)&0x07;
t=(an[0]-14)%28;
x1=dat2[t]>>5;
y1=(dat2[t]>>2)&0x07;
box_apeak_xy(x,y,0,x1,y1,7,0,1);
box_apeak_xy(x,y,1,x1,y1,6,0,1);
an[0]++;
delay(5000);
}
for (i=0;i<16;i++)
{
clear(0);
t=an[0]%28;
x=dat2[t]>>5;
y=(dat2[t]>>2)&0x07;
t=(an[0]-14)%28;
x1=dat2[t]>>5;
y1=(dat2[t]>>2)&0x07;
box_apeak_xy(x,y,0,x1,y1,7,1,1);
an[0]--;
delay(5000);
}
for (i=0;i<8;i++)
{
line(i,i,0,0,0,i,0);
delay(5000);
}
for (i=1;i<7;i++)
{
line(i,i,7,7,7,i,0);
delay(5000);
}
for (i=1;i<8;i++)
{
clear(0);
box(7,7,7,7-i,7-i,7-i,0,1);
delay(10000);
}
for (i=1;i<7;i++)
{
clear(0);
box(0,0,0,7-i,7-i,7-i,0,1);
delay(10000);
}
for (i=1;i<8;i++)
{
clear(0);
box(0,0,0,i,i,i,0,1);
delay(10000);
}
for (i=1;i<7;i++)
{
clear(0);
box(7,0,0,i,7-i,7-i,0,1);
delay(10000);
}
for (i=1;i<8;i++)
{
box(7,0,0,7-i,i,i,1,1);
delay(10000);
}
for (i=1;i<7;i++)
{
clear(0);
box(0,7,7,7-i,i,i,1,1);
delay(10000);
}
}
void flash_10()
{
uchar i,j,an[4],x,y,t;
for (i=1;i<7;i++)
{
clear(0);
box(0,6,6,1,7,7,1,1);
box(i,6,6-i,i+1,7,7-i,1,1);
box(i,6,6,i+1,7,7,1,1);
box(0,6,6-i,1,7,7-i,1,1);
box(0,6-i,6,1,7-i,7,1,1);
box(i,6-i,6-i,i+1,7-i,7-i,1,1);
box(i,6-i,6,i+1,7-i,7,1,1);
box(0,6-i,6-i,1,7-i,7-i,1,1);
delay(30000);
}
for (i=0;i<4;i++)
{
an[i]=6*i;
}
for (i=0;i<35;i++)
{
clear(0);
for(j=0;j<4;j++)
{
t=an[j]%24;
x=dat3[t]>>4;
y=dat3[t]&0x0f;
box(x,y,0,x+1,y+1,1,1,1);
box(x,y,6,x+1,y+1,7,1,1);
}
for (j=0;j<4;j++)
an[j]++;
delay(10000);
}
for (i=0;i<35;i++)
{
clear(0);
for(j=0;j<4;j++)
{
t=an[j]%24;
x=dat3[t]>>4;
y=dat3[t]&0x0f;
box(x,y,0,x+1,y+1,1,1,1);
box(x,y,6,x+1,y+1,7,1,1);
}
for (j=0;j<4;j++)
an[j]--;
delay(10000);
}
for (i=0;i<35;i++)
{
clear(0);
for(j=0;j<4;j++)
{
t=an[j]%24;
x=dat3[t]>>4;
y=dat3[t]&0x0f;
box(x,0,y,x+1,1,y+1,1,1);
box(x,6,y,x+1,7,y+1,1,1);
}
for (j=0;j<4;j++)
an[j]++;
delay(10000);
}
for (i=0;i<36;i++)
{
clear(0);
for(j=0;j<4;j++)
{
t=an[j]%24;
x=dat3[t]>>4;
y=dat3[t]&0x0f;
box(x,0,y,x+1,1,y+1,1,1);
box(x,6,y,x+1,7,y+1,1,1);
}
for (j=0;j<4;j++)
an[j]--;
delay(10000);
}
for (i=6;i>0;i--)
{
clear(0);
box(0,6,6,1,7,7,1,1);
box(i,6,6-i,i+1,7,7-i,1,1);
box(i,6,6,i+1,7,7,1,1);
box(0,6,6-i,1,7,7-i,1,1);
box(0,6-i,6,1,7-i,7,1,1);
box(i,6-i,6-i,i+1,7-i,7-i,1,1);
box(i,6-i,6,i+1,7-i,7,1,1);
box(0,6-i,6-i,1,7-i,7-i,1,1);
delay(30000);
}
}
void flash_11()
{
uchar i,j,t,x,y;
uchar code daa[13]={0,1,2,0x23,5,6,7,6,5,0x23,2,1,0};
for (j=0;j<5;j++)
{
for (i=0;i<13;i++)
{
if (daa[i]>>4)
{
t=daa[i]&0x0f;
line (0,0,t+1,0,7,t+1,1);
}
else
t=daa[i];
line (0,0,t,0,7,t,1);
transss();
delay(10000);
}
}
for (j=1;j<8;j++)
{
if (j>3)
t=4;
else
t=j;
for (i=0;i<24;i+=j)
{
x=dat3[i]>>4;
y=dat3[i]&0x0f;
box_apeak_xy(0,x,y,0,x+1,y+1,1,1);
transss();
delay(10000);
}
}
for (j=1;j<8;j++)
{
if (j>3)
t=4;
else
t=j;
for (i=0;i<24;i+=j)
{
x=dat3[i]>>4;
y=dat3[i]&0x0f;
point (0,x,y,1);
transss();
delay(10000);
}
}
}
void main()
{
sinter();
while(1){
// clear(0);
/*play list*/
//flash_1();
clear(0);
flash_2();
flash_3();
flash_4();
flash_4();
flash_5();
flash_5();
flash_6();
flash_7();
flash_8();
flash_9();
flash_10();
clear (0);
flash_11();
flash_9();
flash_5();
flash_7();
flash_5();
flash_6();
flash_8();
flash_9();
flash_10();
}
}
//P0; //573 in
//P1; //uln2803
//P2; //573 LE
void print() interrupt 1
{
uchar i;
static uchar layer=0;
P1=0;
for (i=0;i<8;i++)
{
P2=1<<i;
delay(3);
P0=display[layer][i];
delay(3);
}
P1=1<<layer;
if (layer<7)
layer++;
else
layer=0;
TH0=0xc0;
TL0=0;
}

复制代码

ID:97561 · 发表于 2015-12-26 13:19

厉害,51黑有你更精彩！！

ID:102853 · 发表于 2016-1-15 10:02

請問你的電源是接哪裡?

ID:84495 · 发表于 2016-3-6 17:38

还是上个原理图看的清楚，

ID:111872 · 发表于 2016-4-2 01:53

谢谢楼主分享

ID:115646 · 发表于 2016-4-21 11:04

谢谢楼主！！！！

ID:115646 · 发表于 2016-4-21 11:41

请问hc595可以吗

ID:115646 · 发表于 2016-4-21 11:42

请问用hc595可以吗

ID:116558 · 发表于 2016-4-25 14:51

我也想做一个，不错

ID:116726 · 发表于 2016-4-26 09:48

我也想做一个

ID:114376 · 发表于 2016-4-27 13:20

我也要做一个

ID:117880 · 发表于 2016-5-1 22:36

谢谢分享

ID:118696 · 发表于 2016-5-10 20:13

挺好的

ID:118696 · 发表于 2016-5-10 20:14

挺好的

ID:120013 · 发表于 2016-5-11 12:10

看看，感觉不错

ID:120013 · 发表于 2016-5-11 12:16

谢谢分享，好好学习一下

ID:120259 · 发表于 2016-5-12 11:56

谢谢分享，好好学习一下

ID:86633 · 发表于 2016-5-18 23:18

好详细学习下

ID:142186 · 发表于 2016-10-10 14:38

犒劳犒劳你

ID:142438 · 发表于 2016-10-12 14:47

谢谢楼主楼主好热吗

ID:143811 · 发表于 2016-10-21 20:47

666好牛逼

ID:144786 · 发表于 2016-11-4 19:50

厉害，我的ge

ID:150000 · 发表于 2016-11-24 19:44

我来看看

ID:160938 · 发表于 2017-1-9 14:24

谢谢分享

ID:161188 · 发表于 2017-1-11 03:03

还是不太懂LED的焊接和原理图

ID:161471 · 发表于 2017-1-12 18:41

厉害,51黑有你更精彩！！

ID:161471 · 发表于 2017-1-12 18:50

谢谢楼主的分享！

ID:161606 · 发表于 2017-1-13 13:30

楼主厉害了
谢谢楼主的分享！

ID:160790 · 发表于 2017-1-13 14:58

能发一下上面这个代码的 .hex文件么？ 877515671@qq.com

ID:171697 · 发表于 2017-3-22 10:47

感谢分享

ID:183611 · 发表于 2017-3-27 22:31

51 黑有你更精彩

ID:169397 · 发表于 2017-3-29 10:04

漂亮，大大大大大大大大大大大大

ID:169397 · 发表于 2017-3-29 10:07

希望发个hex程序2366466904@qq.com谢谢

ID:186926 · 发表于 2017-4-6 23:35

想问下面那个程序是对应第一个视频还是第二个的呢？

ID:171948 · 发表于 2017-4-7 07:23

这个程序2364步楼主太强大了，

ID:186926 · 发表于 2017-4-7 23:06

tangjinshi 发表于 2017-4-7 07:23
这个程序2364步楼主太强大了，

想问下面那个程序是对应第一个视频还是第二个的呢？

ID:187675 · 发表于 2017-4-9 12:49

我也想做一个，不错

ID:206127 · 发表于 2017-5-30 18:08

真厉害，研究一下

ID:223765 · 发表于 2017-8-1 10:46

回帖，谢谢

ID:233305 · 发表于 2017-9-15 13:19

感谢楼主分享

帐号		自动登录	找回密码
密码			立即注册

8X8X8光立方制作教程附原理图程序单片机+洞洞板+573+ULN2803

评分

相关帖子

8X8X8光立方制作教程 附原理图程序 单片机+洞洞板+573+ULN2803

评分

相关帖子

8X8X8光立方制作教程附原理图程序单片机+洞洞板+573+ULN2803