标题: STC12C5630AD.H头文件下载 引脚图 管脚定义封装及中文资料 [打印本页]
作者: songjia    时间: 2015-7-8 15:33
标题: STC12C5630AD.H头文件下载 引脚图 管脚定义封装及中文资料

STC12C5630AD引脚图 管脚定义 封装：



STC12C5630AD.H头文件下载 ：http://www.51hei.com/bbs/dpj-36960-1.html
  1. #ifndef __STC12C5630AD_H_
  2. #define __STC12C5630AD_H_

  4. /////////////////////////////////////////////////

  6. /* The following is STC additional SFR or change */

  8. /* sfr  AUXR  = 0x8e; */
  9. /* sfr  IPH   = 0xb7; */

  11. /* Watchdog Timer Register */
  12. sfr  WDT_CONTR = 0xe1;   

  14. /* ISP_IAP_EEPROM Register */
  15. sfr ISP_DATA  = 0xe2;
  16. sfr ISP_ADDRH = 0xe3;
  17. sfr ISP_ADDRL = 0xe4;
  18. sfr ISP_CMD   = 0xe5;
  19. sfr ISP_TRIG  = 0xe6;
  20. sfr ISP_CONTR = 0xe7;

  22. /* System Clock Divider */
  23. sfr CLK_DIV  = 0xc7;

  25. /* I_O Port Mode Set Register */
  26. sfr P0M0  = 0x93;
  27. sfr P0M1  = 0x94;
  28. sfr P1M0  = 0x91;
  29. sfr P1M1  = 0x92;
  30. sfr P2M0  = 0x95;
  31. sfr P2M1  = 0x96;
  32. sfr P3M0  = 0xb1;
  33. sfr P3M1  = 0xb2;

  35. /* SPI Register */
  36. sfr SPSTAT  = 0x84;
  37. sfr SPCTL   = 0x85;
  38. sfr SPDAT   = 0x86;

  40. /* ADC Register */
  41. sfr ADC_CONTR  = 0xc5;
  42. sfr ADC_DATA   = 0xc6;
  43. sfr ADC_LOW2   = 0xbe;

  45. /* PCA SFR */
  46. sfr CCON   = 0xD8;
  47. sfr CMOD   = 0xD9;
  48. sfr CCAPM0 = 0xDA;
  49. sfr CCAPM1 = 0xDB;
  50. sfr CCAPM2 = 0xDC;
  51. sfr CCAPM3 = 0xDD;
  52. sfr CCAPM4 = 0xDE;
  53. sfr CCAPM5 = 0xDF;

  55. sfr CL     = 0xE9;
  56. sfr CCAP0L = 0xEA;
  57. sfr CCAP1L = 0xEB;
  58. sfr CCAP2L = 0xEC;
  59. sfr CCAP3L = 0xED;
  60. sfr CCAP4L = 0xEE;
  61. sfr CCAP5L = 0xEF;

  63. sfr CH     = 0xF9;
  64. sfr CCAP0H = 0xFA;
  65. sfr CCAP1H = 0xFB;
  66. sfr CCAP2H = 0xFC;
  67. sfr CCAP3H = 0xFD;
  68. sfr CCAP4H = 0xFE;
  69. sfr CCAP5H = 0xFF;

  71. sfr PCA_PWM0 = 0xF2;
  72. sfr PCA_PWM1 = 0xF3;
  73. sfr PCA_PWM2 = 0xF4;
  74. sfr PCA_PWM3 = 0xF5;
  75. sfr PCA_PWM4 = 0xF6;
  76. sfr PCA_PWM5 = 0xF7;

  78. /*  CCON  */
  79. sbit CF    = CCON^7;
  80. sbit CR    = CCON^6;
  81. sbit CCF5  = CCON^5;
  82. sbit CCF4  = CCON^4;
  83. sbit CCF3  = CCON^3;
  84. sbit CCF2  = CCON^2;
  85. sbit CCF1  = CCON^1;
  86. sbit CCF0  = CCON^0;


  89. /* Above is STC additional SFR or change */

  91. /*--------------------------------------------------------------------------
  92. REG51F.H

  94. Header file for 8xC31/51, 80C51Fx, 80C51Rx+
  95. Copyright (c) 1988-1999 Keil Elektronik GmbH and Keil Software, Inc.
  96. All rights reserved.

  98. Modification according to DataSheet from April 1999
  99. - SFR's AUXR and AUXR1 added for 80C51Rx+ derivatives
  100. --------------------------------------------------------------------------*/

  102. /*  BYTE Registers  */
  103. sfr P0   = 0x80;
  104. sfr P1   = 0x90;
  105. sfr P2   = 0xA0;
  106. sfr P3   = 0xB0;
  107. sfr PSW  = 0xD0;
  108. sfr ACC  = 0xE0;
  109. sfr B    = 0xF0;
  110. sfr SP   = 0x81;
  111. sfr DPL  = 0x82;
  112. sfr DPH  = 0x83;
  113. sfr PCON = 0x87;
  114. sfr TCON = 0x88;
  115. sfr TMOD = 0x89;
  116. sfr TL0  = 0x8A;
  117. sfr TL1  = 0x8B;
  118. sfr TH0  = 0x8C;
  119. sfr TH1  = 0x8D;
  120. sfr IE   = 0xA8;
  121. sfr IP   = 0xB8;
  122. sfr SCON = 0x98;
  123. sfr SBUF = 0x99;

  125. /*  80C51Fx/Rx Extensions  */
  126. sfr AUXR   = 0x8E;
  127. /* sfr AUXR1  = 0xA2; */
  128. sfr SADDR  = 0xA9;
  129. sfr IPH    = 0xB7;
  130. sfr SADEN  = 0xB9;
  131. sfr T2CON  = 0xC8;
  132. sfr T2MOD  = 0xC9;
  133. sfr RCAP2L = 0xCA;
  134. sfr RCAP2H = 0xCB;
  135. sfr TL2    = 0xCC;
  136. sfr TH2    = 0xCD;


  139. /*  BIT Registers  */
  140. /*  PSW   */
  141. sbit CY   = PSW^7;
  142. sbit AC   = PSW^6;
  143. sbit F0   = PSW^5;
  144. sbit RS1  = PSW^4;
  145. sbit RS0  = PSW^3;
  146. sbit OV   = PSW^2;
  147. sbit P    = PSW^0;

  149. /*  TCON  */
  150. sbit TF1  = TCON^7;
  151. sbit TR1  = TCON^6;
  152. sbit TF0  = TCON^5;
  153. sbit TR0  = TCON^4;
  154. sbit IE1  = TCON^3;
  155. sbit IT1  = TCON^2;
  156. sbit IE0  = TCON^1;
  157. sbit IT0  = TCON^0;

  159. /*  P3  */
  160. sbit RD   = P3^7;
  161. sbit WR   = P3^6;
  162. sbit T1   = P3^5;
  163. sbit T0   = P3^4;
  164. sbit INT1 = P3^3;
  165. sbit INT0 = P3^2;
  166. sbit TXD  = P3^1;
  167. sbit RXD  = P3^0;

  169. /*  SCON  */
  170. sbit SM0  = SCON^7; // alternatively "FE"
  171. sbit FE   = SCON^7;
  172. sbit SM1  = SCON^6;
  173. sbit SM2  = SCON^5;
  174. sbit REN  = SCON^4;
  175. sbit TB8  = SCON^3;
  176. sbit RB8  = SCON^2;
  177. sbit TI   = SCON^1;
  178. sbit RI   = SCON^0;
  179.             

  181. sbit T2EX = P1^1;
  182. sbit T2   = P1^0;

  184. /*  T2CON  */
  185. sbit TF2   = T2CON^7;
  186. sbit EXF2  = T2CON^6;
  187. sbit RCLK  = T2CON^5;
  188. sbit TCLK  = T2CON^4;
  189. sbit EXEN2 = T2CON^3;
  190. sbit TR2   = T2CON^2;
  191. sbit C_T2  = T2CON^1;
  192. sbit CP_RL2= T2CON^0;

  194. /* PCA Pin */

  196. sbit CEX3 = P2^4;
  197. sbit CEX2 = P2^0;
  198. sbit CEX1 = P3^5;
  199. sbit CEX0 = P3^7;
  200. sbit ECI  = P3^4;

  202. /*  IE   */
  203. sbit EA   = IE^7;
  204. sbit EPCA_LVD  = IE^6;
  205. sbit EADC_SPI  = IE^5;
  206. sbit ES   = IE^4;
  207. sbit ET1  = IE^3;
  208. sbit EX1  = IE^2;
  209. sbit ET0  = IE^1;
  210. sbit EX0  = IE^0;

  212. /*  IP   */
  213. sbit PPCA_LVD  = IP^6;
  214. sbit PADC_SPI  = IP^5;
  215. sbit PS   = IP^4;
  216. sbit PT1  = IP^3;
  217. sbit PX1  = IP^2;
  218. sbit PT0  = IP^1;
  219. sbit PX0  = IP^0;

  221. /////////////////////////////////////////////////

  223. #endif
复制代码



STC12C5630AD中文资料下载链接： STC12C5628AD中文资料.rar (173 Bytes, 下载次数: 34)





欢迎光临 (http://www.51hei.com/bbs/) Powered by Discuz! X3.1