#include <AT89X51.h>
static bit OP; //红外发射管的亮灭
static unsigned int count; //延时计数器
static unsigned int endcount; //终止延时计数
static unsigned char Flag; //红外发送标志
char iraddr1; //十六位地址的第一个字节
char iraddr2; //十六位地址的第二个字节
void SendIRdata(char p_irdata);
void delay();
char getkey()
{
P1=0xfe;P3_6=P3_7=1;P3_3=1;
if(!P1_4)return 1; //ON
if(!P1_5)return 2; //7
if(!P1_6)return 3; //8
if(!P1_7)return 4; //9
if(!P3_6)return 5; //X
if(!P3_7)return 6; //÷
P1=0xfd;
if(!P1_4)return 11; //+-
if(!P1_5)return 12; //4
if(!P1_6)return 13; //5
if(!P1_7)return 14; //6
if(!P3_6)return 15; //-
if(!P3_7)return 16; //MRC
P1=0xfb;
if(!P1_4)return 21; //%
if(!P1_5)return 22; //1
if(!P1_6)return 23; //2
if(!P1_7)return 24; //3
if(!P3_6)return 25; //+
if(!P3_7)return 26; //M-
P1=0xf7;
if(!P1_4)return 31; //□
if(!P1_5)return 32; //0
if(!P1_6)return 33; //.
if(!P1_7)return 34; //=
if(!P3_6)return 35; //+
if(!P3_7)return 36; //M+
P1=0xfF;P3_3=0;
if(!P1_4)return 41; //
if(!P1_5)return 42; //
if(!P1_6)return 43; //
if(!P1_7)return 44; //
if(!P3_6)return 45; //
if(!P3_7)return 46; //
return 0;
}
void main(void)
{
char key;
count = 0;
Flag = 0;
OP = 0;
P3_4 = 1;
EA = 1; //允许CPU中断
TMOD = 0x11; //设定时器0和1为16位模式1
ET0 = 1; //定时器0中断允许
P1=0xff;
TH0 = 0xFF;
TL0 = 0xE6; //设定时值0为38K 也就是每隔26us中断一次
TR0 = 1;//开始计数
iraddr1=0xff;
iraddr2=0xff;
do{
key=getkey();
if(key==1)SendIRdata(0x12);//set
if(key==11)SendIRdata(0x0b);//exit
if(key==25||key==35)SendIRdata(0x1a);//+
if(key==15)SendIRdata(0x1e);//-
if(key==6)SendIRdata(0x0e);//↑ ÷
if(key==16)SendIRdata(0x1d);//↓ MRC
if(key==26)SendIRdata(0x1f);//← M-
if(key==36)SendIRdata(0x1b);//→ M+
if(key==32)SendIRdata(0x00);//0
if(key==22)SendIRdata(0x01);//1
if(key==23)SendIRdata(0x02);//2
if(key==24)SendIRdata(0x03);//3
if(key==12)SendIRdata(0x04);//4
if(key==13)SendIRdata(0x05);//5
if(key==14)SendIRdata(0x06);//6
if(key==2)SendIRdata(0x07);//7
if(key==3)SendIRdata(0x08);//8
if(key==4)SendIRdata(0x09);//9
if(key==21)SendIRdata(0x2A);//%
if(key==5)SendIRdata(0x2B);//X
if(key==33)SendIRdata(0x2C);//.
if(key==34)SendIRdata(0x2D);//=
if(key==31)SendIRdata(0x2E);//□
if(key==41)SendIRdata(0x2F);//
if(key==42)SendIRdata(0x30);//
if(key==43)SendIRdata(0x31);//
if(key==44)SendIRdata(0x32);//
if(key==45)SendIRdata(0x33);//
if(key==46)SendIRdata(0x34);//
}while(1);
}
//定时器0中断处理
void timeint(void) interrupt 1
{
TH0=0xFF;
TL0=0xE6; //设定时值为38K 也就是每隔26us中断一次
count++;
}
void SendIRdata(char p_irdata)
{
int i;
char irdata=p_irdata;
//发送9ms的起始码
endcount=223;
Flag=1;
count=0;
P3_4=0;
do{}while(count<endcount);
//发送4.5ms的结果码
endcount=117;
Flag=0;
count=0;
P3_4=1;
do{}while(count<endcount);
//发送十六位地址的前八位
irdata=iraddr1;
for(i=0;i<8;i++)
{
//先发送0.56ms的38KHZ红外波（即编码中0.56ms的低电平）
endcount=10;
Flag=1;
count=0;
P3_4=0;
do{}while(count<endcount);
//停止发送红外信号（即编码中的高电平）
if(irdata-(irdata/2)*2) //判断二进制数个位为1还是0
{
endcount=15; //1为宽的高电平
}
else
{
endcount=41; //0为窄的高电平
}
Flag=0;
count=0;
P3_4=1;
do{}while(count<endcount);
irdata=irdata>>1;
}
//发送十六位地址的后八位
irdata=iraddr2;
for(i=0;i<8;i++)
{
endcount=10;
Flag=1;
count=0;
P3_4=0;
do{}while(count<endcount);
if(irdata-(irdata/2)*2)
{
endcount=15;
}
else
{
endcount=41;
}
Flag=0;
count=0;
P3_4=1;
do{}while(count<endcount);
irdata=irdata>>1;
}
//发送八位数据
irdata=~p_irdata;
for(i=0;i<8;i++)
{
endcount=10;
Flag=1;
count=0;
P3_4=0;
do{}while(count<endcount);
if(irdata-(irdata/2)*2)
{
endcount=15;
}
else
{
endcount=41;
}
Flag=0;
count=0;
P3_4=1;
do{}while(count<endcount);
irdata=irdata>>1;
}
//发送八位数据的反码
irdata=p_irdata;
for(i=0;i<8;i++)
{
endcount=10;
Flag=1;
count=0;
P3_4=0;
do{}while(count<endcount);
if(irdata-(irdata/2)*2)
{
endcount=15;
}
else
{
endcount=41;
}
Flag=0;
count=0;
P3_4=1;
do{}while(count<endcount);
irdata=irdata>>1;
}
endcount=10;
Flag=1;
count=0;
P3_4=0;
do{}while(count<endcount);
P3_4=1;
Flag=0;
}
void delay()
{
int i,j;
for(i=0;i<400;i++)
{
for(j=0;j<100;j++)
{
}
}
}
|
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
淘帖
顶
踩
