设为首页收藏本站
开启辅助访问 切换到宽版

 找回密码
 立即注册

QQ登录

只需一步，快速开始

热门： 51单片机 | 24小时必答区 | 单片机教程 | 单片机DIY制作 | STM32 | Cortex M3 | 模数电子 | 电子DIY制作 | 音响/功放 | 拆机乐园 | Arduino | 嵌入式OS | 程序设计

搜索
»论坛 › 嵌入式/单片机论坛 › MCU综合技术区 › 51单片机+无字库12864测试程序(纵向取模。字节倒序)
返回列表 发新帖
查看: 5624|回复: 0
打印 上一主题 下一主题
收起左侧

51单片机+无字库12864测试程序(纵向取模。字节倒序)

[复制链接]
跳转到指定楼层
楼主
ID:72705 发表于 2015-1-24 15:34 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
  1. /***********************************************************************
  2.         无字库12864测试程序(纵向取模。字节倒序)
  3.                          crasyboye      
  4. ***********************************************************************/

  6. #include <reg51.h>
  7. #include <ctype.h>
  8. #include <string.h>
  9. #include <stdlib.h>
  10. #include <stdio.h>
  11. #include <math.h>

  13. /* Define the register command code */
  14. #define Disp_On 0x3f
  15. #define Disp_Off 0x3e
  16. #define Col_Add 0x40
  17. #define Page_Add 0xb8
  18. #define Start_Line 0xc0

  20. #define Lcd_Bus P0 //MCU P1<------> LCM

  22. sbit Mcs=P2^3; //Master chip enable
  23. sbit Scs=P2^4; //Slave chip enable
  24. sbit Enable=P2^2; //6800 mode Enable single
  25. sbit Di=P2^0; //Data or Instrument Select
  26. sbit RW=P2^1; //Write or Read
  27. sbit Lcd_Rst=P2^5; //Lcm reset

  29. char code ce[]={
  30. /*-- 文字: 测 --*/
  31. /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/
  32. 0x08,0x31,0x86,0x60,0x00,0xFE,0x02,0xF2,0x02,0xFE,0x00,0xF8,0x00,0x00,0xFF,0x00,
  33. 0x04,0xFC,0x03,0x00,0x80,0x47,0x30,0x0F,0x10,0x67,0x00,0x07,0x40,0x80,0x7F,0x00
  34. };
  35. char code shi[]={
  36. /*-- 文字: 试 --*/
  37. /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/
  38. 0x40,0x42,0xDC,0x08,0x00,0x90,0x90,0x90,0x90,0x90,0xFF,0x10,0x12,0x1C,0x10,0x00,
  39. 0x00,0x00,0x7F,0x20,0x10,0x20,0x20,0x1F,0x10,0x10,0x01,0x06,0x18,0x20,0x78,0x00
  40. };
  41. char code kai[]={
  42. /*-- 文字: 开 --*/
  43. /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/
  44. 0x40,0x42,0x42,0x42,0x42,0xFE,0x42,0x42,0x42,0x42,0xFE,0x42,0x42,0x42,0x42,0x00,
  45. 0x00,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00
  46. };
  47. char code shi3[]={
  48. /*-- 文字: 始 --*/
  49. /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/
  50. 0x10,0x90,0x70,0x1F,0x12,0xF0,0x00,0x20,0x70,0x28,0x27,0x22,0x28,0x70,0x20,0x00,
  51. 0x40,0x21,0x12,0x0C,0x06,0x09,0x30,0x00,0x7F,0x21,0x21,0x21,0x21,0x7F,0x00,0x00
  52. };

  54. char code wan[]={
  55. /*-- 文字: 完 --*/
  56. /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/
  57. 0x00,0x90,0x8C,0xA4,0xA4,0xA4,0xA5,0xA6,0xA4,0xA4,0xA4,0xA4,0x94,0x8C,0x04,0x00,
  58. 0x00,0x80,0x40,0x20,0x18,0x07,0x00,0x00,0x00,0x3F,0x40,0x40,0x40,0x70,0x00,0x00
  59. };
  60. char code bi[]={
  61. /*-- 文字: 毕 --*/
  62. /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/
  63. 0x00,0x00,0xFF,0x88,0x48,0x28,0x08,0x80,0x7F,0x88,0x88,0x88,0x84,0x84,0xE0,0x00,
  64. 0x04,0x04,0x04,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00
  65. };

  67. unsigned char code FirstPage[]={
  68. /*-- 调入了一幅图像：C:\Documents and Settings\freelover\桌面\未标题-1.bmp --*/
  69. /*-- 宽度x高度=128x64 --*/
  70. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x28,0x48,0x88,0x08,0x88,0x78,0x08,0x80,0x60,
  71. 0x3E,0xA0,0x20,0x20,0xA0,0x60,0x20,0x00,0x00,0x40,0x42,0x44,0xCC,0x00,0x00,0xF8,
  72. 0x08,0x04,0x04,0xF8,0x08,0x08,0x08,0xFC,0x08,0x00,0x00,0x00,0x80,0x40,0xF0,0x0E,
  73. 0x08,0xC8,0x48,0x48,0x48,0xFE,0x48,0x48,0x48,0xCC,0x08,0x00,0x00,0x00,0x00,0xFC,
  74. 0x44,0x44,0x44,0x44,0x44,0xFC,0x44,0x44,0x44,0x44,0xFE,0x04,0x00,0x00,0x80,0x40,
  75. 0x20,0x10,0x10,0x10,0x20,0x70,0x00,0x10,0xF0,0x10,0x10,0x10,0x10,0xE0,0x00,0x00,
  76. 0x10,0xF0,0x10,0x10,0x10,0x10,0xE0,0x00,0x00,0x00,0xF0,0x10,0x10,0x10,0x10,0x10,
  77. 0x10,0x00,0x00,0x00,0x20,0x20,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  78. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x20,0x19,0x06,0x05,0x08,0xB0,0x40,0x20,
  79. 0x18,0x07,0x18,0x20,0x40,0x80,0x80,0x00,0x00,0x80,0x40,0x20,0x1F,0x20,0x40,0x8F,
  80. 0x84,0x84,0x82,0xFF,0x80,0x88,0x90,0x8F,0x80,0x00,0x00,0x01,0x00,0x00,0xFF,0x00,
  81. 0x00,0x07,0x8C,0x54,0x24,0x5F,0x84,0x84,0x04,0x07,0x00,0x00,0x00,0x00,0xC0,0x3F,
  82. 0x04,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x84,0x04,0xFF,0x00,0x00,0x00,0x1F,0x60,
  83. 0x80,0x80,0x80,0x80,0x40,0x30,0x00,0x80,0xFF,0x82,0x02,0x0E,0x32,0xC1,0x80,0x00,
  84. 0x80,0xFF,0x82,0x82,0x82,0x83,0x44,0x38,0x00,0x00,0x73,0x82,0x81,0x81,0x81,0x42,
  85. 0x3C,0x00,0x00,0x00,0x80,0x80,0xFF,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  86. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x91,0x51,0x30,0x10,0x10,
  87. 0x90,0x50,0x10,0x10,0x00,0x01,0x10,0x10,0xF0,0x90,0x90,0x90,0x90,0x10,0xE0,0x00,
  88. 0x00,0xF0,0x00,0x00,0x00,0xC0,0x50,0x50,0x60,0x40,0xC0,0x40,0x60,0x50,0x51,0xC0,
  89. 0x01,0x01,0x00,0x00,0xE0,0x00,0x00,0x00,0x01,0xF1,0x01,0x00,0x00,0x01,0x00,0x00,
  90. 0x80,0x80,0xF0,0x80,0x80,0x01,0xE0,0x20,0x20,0xE1,0x00,0x00,0x00,0x00,0xE0,0x20,
  91. 0x20,0xA0,0x20,0x20,0x30,0xA0,0x20,0x20,0x20,0x20,0xE0,0x00,0xD0,0x10,0x10,0xF0,
  92. 0x00,0x00,0x80,0x40,0x30,0x40,0x80,0x00,0x00,0x00,0x80,0x80,0xF0,0x80,0x80,0xE0,
  93. 0x20,0x20,0x20,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  94. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x89,0x49,0x2D,0x8D,0x0B,0xF9,0x09,
  95. 0x08,0x2A,0x4C,0x98,0x00,0x00,0x04,0x03,0x84,0x48,0x30,0x0C,0x03,0x00,0x3F,0x00,
  96. 0x00,0xFF,0x00,0x00,0x40,0x5F,0x52,0x52,0x52,0x52,0xFF,0x52,0x52,0x52,0x52,0x5F,
  97. 0x40,0x00,0x00,0x80,0x7F,0x09,0x09,0x09,0x09,0x09,0x09,0xF9,0x01,0x01,0x00,0x00,
  98. 0x18,0x06,0xFF,0x04,0x08,0x80,0x7F,0x00,0x00,0xFF,0x00,0x00,0xC0,0x00,0x10,0x10,
  99. 0x12,0x94,0x99,0x52,0x30,0x1F,0x30,0x50,0x90,0x10,0x10,0x00,0x47,0x44,0x24,0x27,
  100. 0xFE,0x09,0x72,0x0A,0x72,0x82,0x60,0x1B,0x01,0x00,0x18,0x06,0xFF,0x04,0x88,0x7F,
  101. 0x05,0x89,0x51,0x71,0x8D,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  102. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x08,0x08,0xF9,0x08,0x08,
  103. 0x08,0xF8,0x08,0x08,0x00,0x00,0x01,0x01,0x30,0x28,0x20,0xE0,0x3C,0x20,0x20,0x35,
  104. 0x29,0x20,0x20,0x00,0x00,0x40,0x40,0x50,0x50,0x50,0xFD,0xD0,0x50,0x70,0x50,0x48,
  105. 0x40,0x00,0x01,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x81,0x80,0x80,0x80,0x00,
  106. 0x80,0x80,0x81,0x01,0x81,0x80,0x00,0x00,0x00,0x80,0x81,0x81,0x00,0x00,0x01,0x01,
  107. 0x81,0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x81,0x81,0x80,0x10,0xF0,0x81,0x81,
  108. 0x80,0x01,0x01,0x01,0x01,0x81,0x81,0x81,0x01,0x00,0x80,0x80,0x81,0x01,0x80,0x81,
  109. 0x81,0x00,0x00,0x80,0x80,0x81,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  110. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x21,0x11,0x0D,0x07,0x01,0x01,
  111. 0x01,0x3F,0x01,0x01,0x01,0x00,0x00,0x08,0x0C,0x26,0x23,0x30,0x17,0x1D,0x19,0x17,
  112. 0x31,0x20,0x20,0x00,0x00,0x04,0x04,0x02,0x3E,0x29,0x29,0x2A,0x2A,0x2A,0x3E,0x00,
  113. 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x0F,0x10,0x10,0x10,0x09,0x00,
  114. 0x10,0x10,0x1F,0x11,0x10,0x00,0x00,0x00,0x09,0x14,0x12,0x12,0x1F,0x10,0x00,0x19,
  115. 0x12,0x12,0x14,0x09,0x00,0x40,0x41,0x66,0x18,0x06,0x01,0x00,0x00,0x1F,0x10,0x10,
  116. 0x10,0x0F,0x00,0x00,0x0F,0x10,0x10,0x10,0x0F,0x00,0x40,0x41,0x66,0x18,0x06,0x01,
  117. 0x00,0x00,0x0F,0x12,0x12,0x12,0x0B,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  118. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  119. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  120. 0x00,0x00,0x00,0x00,0x00,0x02,0x0E,0xF2,0x00,0xF2,0x0E,0x02,0x02,0xFE,0x22,0x22,
  121. 0x72,0x06,0x00,0x02,0xFE,0x12,0x32,0xD2,0x0C,0x00,0x00,0x00,0x18,0x18,0x00,0x00,
  122. 0x00,0x00,0x04,0x04,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,
  123. 0x04,0x02,0x02,0x04,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  124. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  125. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  126. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  127. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  128. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x02,0x03,0x02,0x02,
  129. 0x02,0x03,0x00,0x02,0x03,0x02,0x00,0x00,0x03,0x02,0x00,0x00,0x03,0x03,0x00,0x00,
  130. 0x00,0x00,0x02,0x02,0x03,0x02,0x02,0x00,0x00,0x03,0x03,0x00,0x00,0x00,0x00,0x00,
  131. 0x01,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  132. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  133. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  134. };

  136. /*------------------延时子程序-----------------------------*/
  137. void delay(unsigned int t)
  138. {
  139. unsigned int i,j;
  140. for(i=0;i<t;i++)
  141. for(j=0;j<10;j++)
  142. ;
  143. }

  145. /*------------------写命令到LCD------------------------------*/
  146. void write_com(unsigned char cmdcode)
  147. {

  149. Di=0;
  150. RW=0;

  152. Lcd_Bus=cmdcode;
  153. delay(0);
  154. Enable=1;
  155. delay(0);
  156. Enable=0;
  157. }

  159. /*-------------------写数据到LCD----------------------------*/

  161. void write_data(unsigned char Dispdata)
  162. {

  164. Di=1;
  165. RW=0;

  167. Lcd_Bus=Dispdata;
  168. delay(0);
  169. Enable=1;
  170. delay(0);
  171. Enable=0;
  172. }


  175. /*------------------显示边框-------------------------------*/
  176. void frame()
  177. {
  178. unsigned char i;
  179. Mcs=1;
  180. Scs=1;
  181. write_com(Page_Add+0);
  182. write_com(Col_Add+0);
  183. for(i=0;i<64;i++) write_data(0x01);
  184. write_com(Page_Add+7);
  185. write_com(Col_Add+0);
  186. for(i=0;i<64;i++) write_data(0x80);

  188. for(i=0;i<8;i++)

  190. {
  191. Mcs=0;
  192. Scs=1;
  193. write_com(Page_Add+i);
  194. write_com(Col_Add+63);
  195. write_data(0xff);
  196. Mcs=1;
  197. Scs=0;
  198. write_com(Page_Add+i);
  199. write_com(Col_Add+0);
  200. write_data(0xff);
  201. }
  202. }

  204. /*------------------清除内存---------------*/
  205. void Clr_Scr()
  206. {
  207. unsigned char j,k;
  208. Mcs=1;Scs=1;
  209. write_com(Page_Add+0);
  210. write_com(Col_Add+0);

  212. for(k=0;k<8;k++){
  213. write_com(Page_Add+k);
  214. for(j=0;j<64;j++)write_data(0x00);
  215. }
  216. }

  218. /*------------------显示12864图片---------------------------*/
  219. void Disp_Img(unsigned char code *img)
  220. {
  221. unsigned char j,k;
  222. for(k=0;k<8;k++){
  223. Mcs=1;Scs=0;delay(10);
  224. write_com(Page_Add+k);
  225. write_com(Col_Add+0);
  226. for(j=0;j<64;j++) write_data(img[k*128+j]);
  227. Mcs=0;Scs=1; delay(10);
  228. write_com(Page_Add+k);
  229. write_com(Col_Add+0);
  230. for(j=64;j<128;j++) write_data(img[k*128+j]);
  231. }
  232. }

  234. /*------------------显示横---------------------------*/
  235. void Disp_H_Line()
  236. {
  237. unsigned char i,j;
  238. Mcs=1;
  239. Scs=1;
  240. write_com(Disp_On);
  241. write_com(Page_Add);
  242. write_com(Start_Line);
  243. write_com(Col_Add);

  245. for(j=0;j<8;j++)
  246. {
  247. write_com(Page_Add+j);
  248. write_com(Col_Add+0);
  249. // write_com(Start_Line+0);
  250. for(i=0;i<64;i++)write_data(0x55);
  251. }
  252. }


  255. /*------------------显示列-----------------------------*/
  256. void Disp_V_Line()
  257. {
  258. unsigned char i,j;
  259. write_com(Disp_On);
  260. write_com(Page_Add);
  261. write_com(Start_Line);
  262. write_com(Col_Add);

  264. for(j=0;j<8;j++)
  265. {
  266. write_com(Page_Add+j);
  267. write_com(Col_Add+0);
  268. write_com(Start_Line+0);
  269. for(i=0;i<32;i++)
  270. {
  271. write_data(0x00);
  272. write_data(0xff);
  273. }

  275. }
  276. }

  278. /*---------------------指定位置显示汉字16*16-----------------------*/

  280. void hz_disp16(unsigned char pag,unsigned char col, unsigned char code *hzk)
  281. {
  282. unsigned char j=0,i=0;
  283. for(j=0;j<2;j++){
  284. write_com(Page_Add+pag+j);
  285. write_com(Col_Add+col);
  286. for(i=0;i<16;i++) write_data(hzk[16*j+i]);
  287. }
  288. }


  291. /*------------------初始化LCD屏--------------------------*/
  292. void init_lcd()
  293. {
  294. Lcd_Rst=0;
  295. delay(100);
  296. Lcd_Rst=1;
  297. delay(100);

  299. Mcs=1;
  300. Scs=1;

  302. delay(100);
  303. write_com(Disp_Off);
  304. write_com(Page_Add+0);
  305. write_com(Start_Line+0);
  306. write_com(Col_Add+0);
  307. write_com(Disp_On);
  308. }


  311. /*------------------------------信息显示------------------------*/
  312. void Msg(int flg)
  313. {
  314. Clr_Scr();
  315. frame();
  316. if(flg==0){ //显示“测试开始”
  317. Mcs=1;Scs=0;
  318. hz_disp16(3,32,ce);
  319. delay(2000);
  320. hz_disp16(3,48,shi);
  321. delay(2000);
  322. Mcs=0;Scs=1;
  323. hz_disp16(3,0,kai);
  324. delay(2000);
  325. hz_disp16(3,16,shi3);
  326. delay(2000);
  327. }
  328. else if(flg==1){ //显示“测试完毕”
  329. Mcs=1;Scs=0;
  330. hz_disp16(3,32,ce);
  331. hz_disp16(3,48,shi);
  332. Mcs=0;Scs=1;
  333. hz_disp16(3,0,wan);
  334. hz_disp16(3,16,bi);
  335. }
  336. }

  338. /*--------------------主程序---------------------------------*/


  341. main()
  342. {
  343. unsigned char i=0;
  344. while(1){

  346. init_lcd();
  347. Disp_Img(FirstPage);
  348. delay(30000);
  349. Msg(0);
  350. delay(10000);
  351. Disp_H_Line();
  352. delay(10000);
  353. Disp_V_Line();
  354. delay(10000);
  355. Msg(1);
  356. delay(10000);
  357. }
  358. }
复制代码

单片机, 程序
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 分享淘帖 顶顶 踩踩

相关帖子
回复

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|51黑电子论坛 |51黑电子论坛6群 QQ 管理员QQ:125739409;技术交流QQ群281945664

Powered by 单片机教程网

快速回复 返回顶部 返回列表